[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD GX-420CA SOC with Radeon(tm) HD Graphics (1996.30-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16009863168 (15268 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC" frequency 1996297735 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HPQOEM SLIC-CPC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfeb00000-0xfeb3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x9840) HDA Controller> mem 0xfeb64000-0xfeb67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 24 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfe700000-0xfe7fffff,0xfe80c000-0xfe80ffff irq 24 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfe600000-0xfe6fffff,0xfe808000-0xfe80bfff irq 25 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xfe500000-0xfe5fffff,0xfe804000-0xfe807fff irq 26 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xfe400000-0xfe4fffff,0xfe800000-0xfe803fff irq 27 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xfe900000-0xfe900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6e000-0xfeb6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb6b000-0xfeb6bfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6a000-0xfeb6a0ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/8 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm3: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen3.1: <AMD OHCI root HUB> at usbus3 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] ugen1.1: <AMD OHCI root HUB> at usbus1 [...] uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen4.1: <AMD EHCI root HUB> at usbus4 [...] uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SanDisk SD9SN8W128G1102 X6106002> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen1.2: <Microsoft Microsoft 2.4GHz Transceiver v8.0> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus1 [...] ugen3.2: <Broadcom Corp BCM20702A0> at usbus3 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] ubt0 on uhub0 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 2> on usbus3 [...] ums0 on uhub1 [...] ums0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=26 [...] ums0: 0 buttons and [T] coordinates ID=0 [...] uhid0 on uhub1 [...] uhid0: <Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 2> on usbus1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb0: link state changed to DOWN [...] re0: link state changed to UP [...] igb0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] igb0: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ugen1.2: <Microsoft Microsoft 2.4GHz Transceiver v8.0> at usbus1 (disconnected) [...] ukbd0: at uhub1, port 2, addr 2 (disconnected) [...] ukbd0: detached [...] ums0: at uhub1, port 2, addr 2 (disconnected) [...] ums0: detached [...] uhid0: at uhub1, port 2, addr 2 (disconnected) [...] uhid0: detached [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5