[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 1m9s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE hyperv-n248055-e91d90c0ac0 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (1833.41-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3992567808 (3807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10b16fff vs 10b17000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0b16000-0xd0b167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0b00000-0xd0b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0b10000-0xd0b13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 17 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib6 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci4 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 18 at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib7 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 18 at device 0.0 on pci5 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <PCI-PCI bridge> irq 16 at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib8 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 16 at device 0.0 on pci6 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 18 at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib9 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 18 at device 0.0 on pci7 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 drq 3 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1833334494 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 27 [...] pcm0: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Analog Speaker)> at nid 21 on hdaa0 [...] pcm2: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (5) in association 1! Disabling association. [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS64GSSD370S O0724D> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80003008800), ignoring. [...] em0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff8000300a800), ignoring. [...] em1: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em1 (ifp 0xfffff8000305d800), ignoring. [...] em2: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em2 (ifp 0xfffff8000305f800), ignoring. [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 4m15s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE hyperv-n248055-e91d90c0ac0 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (1833.41-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3992567808 (3807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10b16fff vs 10b17000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0b16000-0xd0b167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0b00000-0xd0b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0b10000-0xd0b13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 17 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib6 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci4 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 18 at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib7 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 18 at device 0.0 on pci5 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <PCI-PCI bridge> irq 16 at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib8 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 16 at device 0.0 on pci6 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 18 at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib9 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 18 at device 0.0 on pci7 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 drq 3 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1833334648 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 27 [...] pcm0: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Analog Speaker)> at nid 21 on hdaa0 [...] pcm2: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (5) in association 1! Disabling association. [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS64GSSD370S O0724D> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80003088800), ignoring. [...] em0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff8000308a800), ignoring. [...] em1: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em1 (ifp 0xfffff800030ed800), ignoring. [...] em2: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em2 (ifp 0xfffff800030ef800), ignoring. [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0b14000-0xd0b1401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] em1: link state changed to DOWN [...] vlan0: changing name to 'em1_vlan10' [...] tun1: changing name to 'ovpns1' [...] em0: link state changed to DOWN [...] em2: link state changed to DOWN [...] igb0: link state changed to DOWN [...] em1: link state changed to UP [...] em1_vlan10: link state changed to UP [...] em2: link state changed to UP [...] em0: link state changed to UP [...] igb0: link state changed to UP [...] em1: link state changed to DOWN [...] em1_vlan10: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] em1: link state changed to UP [...] em1_vlan10: link state changed to UP [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 17 3 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 26d1h1m23s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (1833.41-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3992567808 (3807 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10b16fff vs 10b17000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0b16000-0xd0b167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0b00000-0xd0b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0b10000-0xd0b13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 17 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib6 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci4 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 18 at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib7 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 18 at device 0.0 on pci5 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <PCI-PCI bridge> irq 16 at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib8 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 16 at device 0.0 on pci6 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 18 at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib9 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 18 at device 0.0 on pci7 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 drq 3 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1833334665 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 27 [...] pcm0: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Internal Analog Speaker)> at nid 21 on hdaa0 [...] pcm2: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (5) in association 1! Disabling association. [...] hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS64GSSD370S O0724D> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs...