[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(vbefb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (1600.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3925442560 (3743 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1599997240 Hz quality 1000 [...] KTLS: Initialized 2 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000056 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0xa1310000-0xa1313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff irq 18 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] Root mount waiting for: usbus0 [...] uhub0: 13 ports with 13 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x13fe USB DISK 2.0> at usbus0 [...] umass0 on uhub1 [...] umass0: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:0:0: Attached to scbus0 [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: < USB DISK 2.0 PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15292MB (31318016 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_274-470D-E215-5441-0D80B5D740F4. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: Label HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3(gptid/HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_274-470D-E215-5441-0D80B5D740F4(gptid/HASH_274-470D-E215-5441-0D80B5D740F4) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3(gptid/HASH_62D-93EC-61B6-D2E3-3B5B2741B9B3) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_274-470D-E215-5441-0D80B5D740F4(gptid/HASH_274-470D-E215-5441-0D80B5D740F4) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] ugen0.4: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.5: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <vendor 0x04f3 product 0x0103> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 5> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/iso9660/LIVE... [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] random: unblocking device. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "vbefb" with new "dummy". [...] Successfully added WC MTRR for [0xb0000000-0xbfffffff]: 0; [...] [drm] Got stolen memory base 0x9af00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-3 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1024 width=1280 depth=32 [...] cmsize=16 size=5242880 [...] pbase=0xb01e0000 vbase=0xfffff800b01e0000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=bcbcbc cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=ffffff [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_video0: <ACPI video extension> on vgapci0 [...] ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0xa1314000-0xa131401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ums0 on uhub2 [...] ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 4> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 5> on usbus0 [...] re0: link state changed to UP