[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz (1500.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50664 Family=0x6 Model=0x56 Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66532114432 (63449 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Cisco0 CiscoUCS> [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 1 package(s) x 12 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 22 18 3 5 12 19 6 8 21 15 4 20 10 17 7 2 14 13 11 16 23 9 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Cisco0 CiscoUCS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0xe000-0xe0ff mem 0xfb800000-0xfb80ffff,0xfb700000-0xfb7fffff irq 26 at device 0.0 numa-domain 0 on pci2 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 240, limiting to 128 [...] mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0 [...] mfi0: 25032 (743902811s/0x0020/info) - Shutdown command received from host [...] mfi0: 25033 (boot + 7s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/01b3/1137) [...] mfi0: 25034 (boot + 7s/0x0020/info) - Firmware version 4.620.01-7240 [...] mfi0: 25035 (boot + 9s/0x0020/info) - Package version 24.12.1-0054 [...] mfi0: 25036 (boot + 9s/0x0020/info) - Board Revision [...] mfi0: 25037 (boot + 31s/0x0002/WARN) - PD PD 01(e0x00/s0) is not enterprise class self encrypting drive. Encryption capability of the drive will be disabled [...] mfi0: 25038 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x3e/s2) [...] mfi0: 25039 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x3e/s2) Info: enclPd=3e, scsiType=0, portMap=01, sasAddr=4433221101000000,0000000000000000 [...] pcib3: <ACPI PCI-PCI bridge>mfi0: 25040 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x3e/s1) [...] irq 26 at device 1.1mfi0: 25041 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x3e/s1) Info: enclPd=3e, scsiType=0, portMap=00, sasAddr=4433221100000 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus>000,0000000000000000 [...] mfi0: 25042 (boot + 32s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 25043 (743902895s/0x0020/info) - Time established as 07/28/23 23:41:35; (35 seconds since power on) [...] mfi0: 25044 (743902958s/0x0020/info) - Host driver is loaded and operational [...] numa-domain 0 on pcib3 [...] igb0: <Intel(R) I350 (Fiber)> port 0xd020-0xd03f mem 0xfbb20000-0xfbb3ffff,0xfbb44000-0xfbb47fff irq 26 at device 0.0 numa-domain 0 on pci3 [...] igb0: EEPROM V1.63-0 eTrack 0x80000e2f [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Fiber)> port 0xd000-0xd01f mem 0xfbb00000-0xfbb1ffff,0xfbb40000-0xfbb43fff irq 28 at device 0.1 numa-domain 0 on pci3 [...] igb1: EEPROM V1.63-0 eTrack 0x80000e2f [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci1 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] ix0: <Intel(R) X552 (KR Backplane)> mem 0xf7c00000-0xf7dfffff,0xf7e00000-0xf7e03fff irq 32 at device 0.0 numa-domain 0 on pci5 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 12 RX queues 12 TX queues [...] ix0: Using MSI-X interrupts with 13 vectors [...] ix0: allocated for 12 queues [...] ix0: allocated for 12 rx queues [...] ix0: Ethernet address: ... [...] ix0: eTrack 0x800003c7 [...] ix0: netmap queues/slots: TX 12/2048, RX 12/2048 [...] pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci1 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE backplane - 2.3.2-k> mem 0x383ff1000000-0x383ff17fffff,0x383ff2008000-0x383ff200ffff irq 40 at device 0.0 numa-domain 0 on pci7 [...] ixl0: fw 6.0.48442 api 1.7 nvm 6.01 etid 800076e1 oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 12 RX queues 12 TX queues [...] ixl0: Using MSI-X interrupts with 13 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=8 [...] ixl0: taskqgroup_attach_cpu failed 22 [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 16 queues for PF LAN VSI; 12 queues active [...] ixl0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 12/1024, RX 12/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE backplane - 2.3.2-k> mem 0x383ff0800000-0x383ff0ffffff,0x383ff2000000-0x383ff2007fff irq 40 at device 0.1 numa-domain 0 on pci7 [...] ixl1: fw 6.0.48442 api 1.7 nvm 6.01 etid 800076e1 oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 12 RX queues 12 TX queues [...] ixl1: Using MSI-X interrupts with 13 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=8 [...] ixl1: taskqgroup_attach_cpu failed 22 [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 16 queues for PF LAN VSI; 12 queues active [...] ixl1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 12/1024, RX 12/1024 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0x383ffff00000-0x383ffff0ffff irq 19 at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1 [...] ACPI Warning: \134_SB.PCI0.RP01._PRT: Return Package has no elements (empty) (20201113/nsprepkg-251) [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib8: no PRT entry for 10.0.INTB [...] pcib10: <ACPI PCI-PCI bridge> irq 10 at device 1.0 numa-domain 0 on pci9 [...] pcib11: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci9 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pcib8: no PRT entry for 10.0.INTC [...] pci10: <network, ethernet> at device 0.0 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib12 [...] igb2: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xfb100000-0xfb1fffff,0xfb200000-0xfb203fff irq 16 at device 0.0 numa-domain 0 on pci11 [...] igb2: EEPROM V3.25-0 eTrack 0x800005cd [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci1 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib13 [...] vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xf9810000-0xf9813fff,0xf9000000-0xf97fffff irq 16 at device 0.0 numa-domain 0 on pci12 [...] vgapci0: Boot video device [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfbc01000-0xfbc013ff irq 18 at device 29.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbc00000-0xfbc007ff irq 16 at device 31.2 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17f200000f00 [...] device_attach: est23 attach returned 6 [...] Timecounter "TSC" frequency 1499998640 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 913618MB (1871089664 sectors) RAID volume 'SSD' is optimal [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <Micron 1100 MTFDDAV256TBN M0MU020> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 61035MB (125000001 512 byte sectors) [...] ses0: ada0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 numa-domain 0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <Avocent Cisco USB Composite Device-0> at usbus0 [...] ukbd1 numa-domain 0 on uhub1 [...] ukbd1: <Keyboard> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.4: <Avocent Cisco USB Composite Device-1> at usbus0 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <SCSI Transparent Interface 0> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] cd0: <Cisco vKVM-Mapped vDVD 1.22> Removable CD-ROM SCSI device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da0: <Cisco vKVM-Mapped vHDD 1.22> Removable Direct Access SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da0: Write Protected [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Cypress RAID (0x04b4:0x4721) [...] da1 at umass-sim0 bus 0 scbus4 target 0 lun 2 [...] da1: <Cisco vKVM-Mapped vFDD 1.22> Removable Direct Access SCSI device [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da1: Write Protected [...] ugen0.5: <Cypress RAID> at usbus0 [...] umass1 numa-domain 0 on uhub1 [...] umass1: <Cypress RAID, class 0/0, rev 3.00/0.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:5:1: Attached to scbus5 [...] (probe1:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe1:umass-sim1:1:0:0): CAM status: SCSI Status Error [...] (probe1:umass-sim1:1:0:0): SCSI status: Check Condition [...] (probe1:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe1:umass-sim1:1:0:0): Error 22, Unretryable error [...] da2 at umass-sim1 bus 1 scbus5 target 0 lun 0 [...] da2: <Cisco RAID SD0_1 0001> Removable Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 400.000MB/s transfers [...] da2: 200MB (409600 512 byte sectors) [...] da2: quirks=0x2<NO_6_BYTE> [...] cd1 at umass-sim0 bus 0 scbus4 target 0 lun 3 [...] cd1: <Cisco CIMC-Mapped vDVD 1.22> Removable CD-ROM SCSI device [...] cd1: 40.000MB/s transfers [...] cd1: Attempt to query device size failed: NOT READY, Medium not present [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] da3 at umass-sim0 bus 0 scbus4 target 0 lun 4 [...] da3: <Cisco CIMC-Mapped vHDD 1.22> Removable Direct Access SCSI device [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] da3: Write Protected