[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD FX(tm)-9590 Eight-Core Processor (4715.98-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33252581376 (31712 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 2 4 6 3 7 5 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd01fffff,0xfea00000-0xfea3ffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe900000-0xfe9001ff irq 44 at device 0.0 on pci2 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff irq 46 at device 0.0 on pci3 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 51 at device 0.0 on pci4 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe600000-0xfe607fff irq 50 at device 0.0 on pci5 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe500000-0xfe507fff irq 48 at device 0.0 on pci6 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xb050-0xb057,0xb040-0xb043,0xb030-0xb037,0xb020-0xb023,0xb000-0xb01f mem 0xfe400000-0xfe4001ff irq 47 at device 0.0 on pci7 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> mem 0xfe200000-0xfe23ffff irq 40 at device 0.0 on pci9 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 40 at device 8.0 on pci10 [...] pci11: <PCI bus> on pcib11 [...] igb0: <Intel(R) I211 (Copper)> mem 0xfe100000-0xfe11ffff,0xfe120000-0xfe123fff irq 40 at device 0.0 on pci11 [...] igb0: NVM V0.4 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <PCI-PCI bridge> irq 41 at device 9.0 on pci10 [...] pci12: <PCI bus> on pcib12 [...] igb1: <Intel(R) I211 (Copper)> mem 0xfe000000-0xfe01ffff,0xfe020000-0xfe023fff irq 41 at device 0.0 on pci12 [...] igb1: NVM V0.4 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 40 at device 16.0 on pci10 [...] pci13: <PCI bus> on pcib13 [...] igb2: <Intel(R) I211 (Copper)> mem 0xfdf00000-0xfdf1ffff,0xfdf20000-0xfdf23fff irq 40 at device 0.0 on pci13 [...] igb2: NVM V0.4 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <PCI-PCI bridge> irq 41 at device 17.0 on pci10 [...] pci14: <PCI bus> on pcib14 [...] ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] ahcich8: <AHCI channel> at channel 4 on ahci2 [...] ahcich9: <AHCI channel> at channel 5 on ahci2 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus3 on ohci0 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0 [...] usbus5 on ohci1 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib15: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci15: <ACPI PCI bus> on pcib15 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus7 on ohci2 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] pcib16: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci16: <ACPI PCI bus> on pcib16 [...] pcib17: <ACPI PCI-PCI bridge> at device 21.1 on pci0 [...] pci17: <ACPI PCI bus> on pcib17 [...] pci17: <network> at device 0.0 (no driver attached) [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0 [...] usbus8 on ohci3 [...] usbus8: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0 [...] usbus9: EHCI version 1.0 [...] usbus9 on ehci2 [...] usbus9: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1178956394 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALC899 (Onboard Digital)> at nid 17 on hdaa1 [...] pcm7: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen9.1: <ATI EHCI root HUB> at usbus9 [...] uhub1 on usbus9 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] uhub2 on usbus5 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub3 on usbus7 [...] uhub4 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] ugen8.1: <ATI OHCI root HUB> at usbus8 [...] uhub5 on usbus3 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub6 on usbus8 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub7 on usbus1 [...] uhub7: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub8 on usbus6 [...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] uhub9 on usbus2 [...] uhub9: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Samsung SSD 860 PRO 512GB RVM02B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada1 at ahcich7 bus 0 scbus4 target 0 lun 0 [...] ada1: <Samsung SSD 850 EVO 120GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada2 at ahcich8 bus 0 scbus5 target 0 lun 0 [...] ada2: <Samsung SSD 860 PRO 256GB RVM01B6Q> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 244198MB (500118192 512 byte sectors) [...] ada3 at ahcich9 bus 0 scbus6 target 0 lun 0 [...] ada3: <KINGSTON SV300S37A120G 505ABBF1> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 114473MB (234441648 512 byte sectors) [...] cd0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] cd0: <TSSTcorp DVDWBD SH-B123L SB02> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub3: 2 ports with 2 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] uhub9: 4 ports with 4 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus4 usbus6 usbus9 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub8: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen8.2: <vendor 0x8087 product 0x0032> at usbus8