[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33121849344 (31587 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 5 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0xdf710000-0xdf71ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf728000-0xdf729fff,0xdf72c000-0xdf72c0ff,0xdf72b000-0xdf72b7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 29.3 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xdf000000-0xdf001fff irq 19 at device 0.0 on pci7 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-H HDA Controller> mem 0xdf720000-0xdf723fff,0xdf700000-0xdf70ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499996957 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE S326M256G V4.29.0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0: ada0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <(0x1912) XHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 1 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 4 ports with 1 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <Logitech USB Optical Mouse> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ichsmb0: <Intel Kaby Lake SMBus controller> port 0xf040-0xf05f mem 0xdf72a000-0xdf72a0ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub2 [...] ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 on uhub2 [...] ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 4> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6m17s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33121849344 (31587 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 5 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0xdf710000-0xdf71ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf728000-0xdf729fff,0xdf72c000-0xdf72c0ff,0xdf72b000-0xdf72b7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 29.3 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xdf000000-0xdf001fff irq 19 at device 0.0 on pci7 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-H HDA Controller> mem 0xdf720000-0xdf723fff,0xdf700000-0xdf70ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499996884 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <(0x1912) XHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE S326M256G V4.29.0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 1 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 4 ports with 1 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <Logitech USB Optical Mouse> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ichsmb0: <Intel Kaby Lake SMBus controller> port 0xf040-0xf05f mem 0xdf72a000-0xdf72a0ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub2 [...] ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 on uhub2 [...] ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 4> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4m55s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33121849344 (31587 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 4 2 1 3 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0xdf710000-0xdf71ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf728000-0xdf729fff,0xdf72c000-0xdf72c0ff,0xdf72b000-0xdf72b7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 29.3 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xdf000000-0xdf001fff irq 19 at device 0.0 on pci7 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-H HDA Controller> mem 0xdf720000-0xdf723fff,0xdf700000-0xdf70ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499996679 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <FORESEE S326M256G V4.29.0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0: ada0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <(0x1912) XHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 1 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 2> on usbus0 [...] uhub3: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 1 removable, self powered [...] ugen0.4: <vendor 0x13ba Barcode Reader> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <Logitech USB Optical Mouse> at usbus0