[...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb7: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 3m58s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2236 CPU @ 3.40GHz (3408.18-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33234149376 (31694 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 6 3 7 10 11 8 9 4 5 [...] Timecounter "TSC-low" frequency 1704088188 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94400000-0x944fffff,0x9450c000-0x9450ffff irq 17 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94300000-0x943fffff,0x94508000-0x9450bfff irq 18 at device 0.1 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94200000-0x942fffff,0x94504000-0x94507fff irq 19 at device 0.2 on pci2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94100000-0x941fffff,0x94500000-0x94503fff irq 16 at device 0.3 on pci2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x4000000000-0x400000ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x8050-0x8057,0x8040-0x8043,0x8020-0x803f mem 0x94a00000-0x94a01fff,0x94a03000-0x94a030ff,0x94a02000-0x94a027ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7000-0x701f mem 0x94900000-0x9497ffff,0x94980000-0x94983fff irq 16 at device 0.0 on pci3 [...] igb4: PHY reset is blocked due to SOL/IDER session. [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 27.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x6000-0x601f mem 0x94800000-0x9487ffff,0x94880000-0x94883fff irq 17 at device 0.0 on pci4 [...] igb5: PHY reset is blocked due to SOL/IDER session. [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: link state changed to UP [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 27.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5000-0x501f mem 0x94700000-0x9477ffff,0x94780000-0x94783fff irq 18 at device 0.0 on pci5 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 27.7 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0x94600000-0x9467ffff,0x94680000-0x94683fff irq 19 at device 0.0 on pci6 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0x90000000-0x93ffffff,0x94000000-0x9401ffff irq 16 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 31.0 on pci0 [...] device_attach: isab1 attach returned 6 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]... [...] uhub0: 22 ports with 22 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb7: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] lagg0: IPv6 addresses on igb5 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to UP [...] igb7: link state changed to DOWN [...] lagg0: IPv6 addresses on igb7 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan190' [...] vlan1: changing name to 'lagg0_vlan181' [...] vlan2: changing name to 'lagg0_vlan184' [...] vlan3: changing name to 'lagg0_vlan191' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] tun1: changing name to 'ovpns1' [...] igb7: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb5: permanently promiscuous mode enabled [...] igb7: permanently promiscuous mode enabled [...] igb7: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb7: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb5: Interface stopped DISTRIBUTING, possible flapping [...] igb7: Interface stopped DISTRIBUTING, possible flapping [...] lagg0: link state changed to DOWN [...] lagg0_vlan184: link state changed to DOWN [...] lagg0_vlan191: link state changed to DOWN [...] lagg0_vlan190: link state changed to DOWN [...] lagg0_vlan181: link state changed to DOWN [...] lagg0: link state changed to UP [...] lagg0_vlan184: link state changed to UP [...] lagg0_vlan191: link state changed to UP [...] lagg0_vlan190: link state changed to UP [...] lagg0_vlan181: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb7: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb7: link state changed to UP [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] ovpns1: link state changed to DOWN [...] igb1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1d12h21m58s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2236 CPU @ 3.40GHz (3408.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33234149376 (31694 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 10 8 11 9 4 7 6 5 2 3 [...] Timecounter "TSC-low" frequency 1704085921 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94400000-0x944fffff,0x9450c000-0x9450ffff irq 17 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94300000-0x943fffff,0x94508000-0x9450bfff irq 18 at device 0.1 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94200000-0x942fffff,0x94504000-0x94507fff irq 19 at device 0.2 on pci2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x94100000-0x941fffff,0x94500000-0x94503fff irq 16 at device 0.3 on pci2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x4000000000-0x400000ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x8050-0x8057,0x8040-0x8043,0x8020-0x803f mem 0x94a00000-0x94a01fff,0x94a03000-0x94a030ff,0x94a02000-0x94a027ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7000-0x701f mem 0x94900000-0x9497ffff,0x94980000-0x94983fff irq 16 at device 0.0 on pci3 [...] igb4: PHY reset is blocked due to SOL/IDER session. [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 27.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x6000-0x601f mem 0x94800000-0x9487ffff,0x94880000-0x94883fff irq 17 at device 0.0 on pci4 [...] igb5: PHY reset is blocked due to SOL/IDER session. [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: link state changed to UP [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 27.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5000-0x501f mem 0x94700000-0x9477ffff,0x94780000-0x94783fff irq 18 at device 0.0 on pci5 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 27.7 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0x94600000-0x9467ffff,0x94680000-0x94683fff irq 19 at device 0.0 on pci6 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0x90000000-0x93ffffff,0x94000000-0x9401ffff irq 16 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 31.0 on pci0 [...] device_attach: isab1 attach returned 6 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]... [...] uhub0: 22 ports with 22 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb7: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] lagg0: IPv6 addresses on igb5 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to UP [...] igb7: link state changed to DOWN [...] lagg0: IPv6 addresses on igb7 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan190' [...] vlan1: changing name to 'lagg0_vlan181' [...] vlan2: changing name to 'lagg0_vlan184' [...] vlan3: changing name to 'lagg0_vlan191' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] tun1: changing name to 'ovpns1' [...] igb7: link state changed to UP [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb5: permanently promiscuous mode enabled [...] igb7: permanently promiscuous mode enabled [...] igb7: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb7: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb7: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb7: link state changed to UP [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb7: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb7: link state changed to UP