[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254761-4b4f06e3731 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.73-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8292610048 (7908 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0ce0-0xf0cfe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <GBT GBTUACPI> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf6500000-0xf65003ff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xf6400000-0xf6400fff,0xf6000000-0xf6003fff irq 17 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf6100000-0xf6100fff,0xf6200000-0xf6203fff irq 18 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: turning off MSI enable bit. [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xf6300000-0xf6301fff irq 19 at device 0.0 on pci3 [...] ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x1<NOFORCE> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] atapci0: <JMicron JMB363 UDMA133 controller> port 0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f irq 16 at device 0.1 on pci3 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf5000000-0xf5000fff irq 16 at device 0.0 on pci4 [...] re2: Using 1 MSI message [...] re2: Chip rev. 0x38000000 [...] re2: MAC rev. 0x00000000 [...] miibus2: <MII bus> on re2 [...] rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 23 at device 29.0 on pci0 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 19 at device 29.1 on pci0 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 18 at device 29.2 on pci0 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf6501000-0xf65013ff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel ICH9 AHCI SATA controller> port 0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem 0xf6502000-0xf65027ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ahciem0: <AHCI enclosure management bridge> on ahci1 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc9000-0xc9fff,0xcc000-0xcefff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 82a082a0600062a [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 82a082a0600062a [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC-low" frequency 1333333045 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub0 on usbus1 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus6 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub2 on usbus7 [...] uhub3 on usbus4 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus5 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub6 on usbus0 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub7 on usbus3 [...] uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ses0 at ahciem0 bus 0 scbus9 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich3 bus 0 scbus4 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31120GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114472MB (234439535 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus4 target 0 [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 [...] Root mount waiting for: usbus3 usbus7 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub7: 6 ports with 6 removable, self powered