[...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub2 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub2 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub1 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub1 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub1 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] pcm4 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm4: MPU401 found [...] pcm4: i2c timeout [...] pcm4: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.4.buffersize)! [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1h9m3s [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600 6-Core Processor (3593.32-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16515133440 (15750 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 10 11 9 8 7 2 6 1 3 4 5 [...] Timecounter "TSC-low" frequency 1796660982 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfc800000-0xfc803fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme1: <Generic NVMe Device> mem 0xfc600000-0xfc603fff irq 28 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 31 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pci8: <multimedia, audio> at device 4.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc504000-0xfc504fff,0xfc500000-0xfc503fff irq 28 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] pcm4 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm4: MPU401 found [...] pcm4: i2c timeout [...] pcm4: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.4.buffersize)! [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub0 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub0 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub1 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub1 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub1 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] pid 5849 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1h43m55s [...] ukbd0: detached [...] uhid1: detached [...] uhid3: detached [...] ums0: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uhid0: detached [...] uhid2: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600 6-Core Processor (3593.32-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16515133440 (15750 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 6 7 8 9 10 4 11 1 5 3 2 [...] Timecounter "TSC-low" frequency 1796660928 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfc800000-0xfc803fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme1: <Generic NVMe Device> mem 0xfc600000-0xfc603fff irq 28 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 31 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pci8: <multimedia, audio> at device 4.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc504000-0xfc504fff,0xfc500000-0xfc503fff irq 28 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] pcm4 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm4: MPU401 found [...] pcm4: i2c timeout [...] pcm4: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.4.buffersize)! [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub0 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub0 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub1 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub1 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub1 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] pcm4: i2c timeout [...] ugen0.4: <SanDisk Ultra> at usbus0 [...] umass0 on uhub0 [...] umass0: <SanDisk Ultra, class 0/0, rev 3.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 29327MB (60062500 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] WARNING: /data was not properly dismounted [...] WARNING: /data: mount pending error: blocks 440 files 10 [...] WARNING: /media/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX TRIM flag on fs but disk does not support TRIM [...] ugen0.4: <SanDisk Ultra> at usbus0 (disconnected) [...] umass0: at uhub0, port 4, addr 3 (disconnected) [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <SanDisk Ultra 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.4: <Broadcom Corp BCM20702A0> at usbus0 [...] ubt0 on uhub0 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ugen0.4: <Broadcom Corp BCM20702A0> at usbus0 (disconnected) [...] ubt0: at uhub0, port 8, addr 4 (disconnected) [...] ubt0: detached [...] ugen0.4: <Broadcom Corp BCM20702A0> at usbus0 [...] ubt0 on uhub0 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 5> on usbus0 [...] ng_l2cap_lp_receive: ubt0l2cap - unexpected ACL data packet. Connection does not exist, con_handle=12 [...] ng_l2cap_lp_receive: ubt0l2cap - unexpected ACL data packet. Connection does not exist, con_handle=12 [...] ng_l2cap_lp_receive: ubt0l2cap - unexpected ACL data packet. Connection does not exist, con_handle=12 [...] ng_l2cap_lp_receive: ubt0l2cap - unexpected ACL data packet. Connection does not exist, con_handle=12 [...] ng_l2cap_lp_discon_ind: ubt0l2cap - unexpected LP_DisconnectInd event. Connection does not exist, con_handle=12 [...] ng_l2cap_lp_discon_ind: ubt0l2cap - unexpected LP_DisconnectInd event. Connection does not exist, con_handle=11 [...] ubt0: ubt_bulk_read_callback:1105: bulk-in transfer failed: USB_ERR_IOERROR [...] ubt0: ubt_intr_read_callback:1006: interrupt transfer failed: USB_ERR_IOERROR [...] ugen0.4: <Broadcom Corp BCM20702A0> at usbus0 (disconnected) [...] ubt0: at uhub0, port 8, addr 5 (disconnected) [...] ubt0: detached [...] pid 3211 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 3212 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 3214 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Failed to fully fault in a core file segment at VA 0x805e00000 with size 0x4000000000 to be written at offset 0x2de4000 for process baloo_file [...] pid 3267 (baloo_file), jid 0, uid 1001: exited on signal 4 (core dumped) [...] pid 3554 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 3555 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 3557 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Failed to fully fault in a core file segment at VA 0x805e00000 with size 0x4000000000 to be written at offset 0x2de4000 for process baloo_file [...] pid 3620 (baloo_file), jid 0, uid 1001: exited on signal 4 (core dumped) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] pid 7075 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7085 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7089 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7139 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7182 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7222 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7266 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7272 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 6h11m51s [...] ukbd0: detached [...] uhid1: detached [...] uhid3: detached [...] ums0: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uhid0: detached [...] uhid2: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600 6-Core Processor (3593.33-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16515133440 (15750 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 8 9 7 6 10 1 11 4 5 2 3 [...] Timecounter "TSC-low" frequency 1796664402 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfc800000-0xfc803fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme1: <Generic NVMe Device> mem 0xfc600000-0xfc603fff irq 28 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 31 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pci8: <multimedia, audio> at device 4.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc504000-0xfc504fff,0xfc500000-0xfc503fff irq 28 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] pcm4 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm4: MPU401 found [...] pcm4: i2c timeout [...] pcm4: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.4.buffersize)! [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub1 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub1 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub0 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub0 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] pcm4: i2c timeout [...] Failed to fully fault in a core file segment at VA 0x805e00000 with size 0x4000000000 to be written at offset 0x2de4000 for process baloo_file [...] pid 1318 (baloo_file), jid 0, uid 1001: exited on signal 4 (core dumped) [...] pid 1734 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1m41s [...] ukbd0: detached [...] uhid1: detached [...] uhid3: detached [...] ums0: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uhid0: detached [...] uhid2: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600 6-Core Processor (3593.33-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16515133440 (15750 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 9 8 7 6 11 1 10 5 4 2 3 [...] Timecounter "TSC-low" frequency 1796664744 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfc800000-0xfc803fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme1: <Generic NVMe Device> mem 0xfc600000-0xfc603fff irq 28 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 31 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pci8: <multimedia, audio> at device 4.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc504000-0xfc504fff,0xfc500000-0xfc503fff irq 28 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD X570 HDA Controller> mem 0xfc400000-0xfc407fff irq 36 at device 0.4 on pci13 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 CAM usbus1 usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] pcm6 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm6: MPU401 found [...] pcm6: i2c timeout [...] pcm6: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.6.buffersize)! [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub1 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub1 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub0 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub0 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] Failed to fully fault in a core file segment at VA 0x805e00000 with size 0x4000000000 to be written at offset 0x2de4000 for process baloo_file [...] pid 1298 (baloo_file), jid 0, uid 1001: exited on signal 4 (core dumped) [...] pid 1521 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 4m30s [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 5 3600 6-Core Processor (3593.32-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16515133440 (15750 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 6 7 11 10 8 2 9 1 3 4 5 [...] Timecounter "TSC-low" frequency 1796661810 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfc800000-0xfc803fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme1: <Generic NVMe Device> mem 0xfc600000-0xfc603fff irq 28 at device 0.0 on pci5 [...] pcib6: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 31 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pci8: <multimedia, audio> at device 4.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc504000-0xfc504fff,0xfc500000-0xfc503fff irq 28 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci11 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x1aeb) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci11 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe2000000-0xe203ffff,0xe2040000-0xe204ffff irq 52 at device 0.2 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci11: <serial bus> at device 0.3 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci13 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD X570 HDA Controller> mem 0xfc400000-0xfc407fff irq 36 at device 0.4 on pci13 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x10de XHCI root HUB> at usbus1 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x10de XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] nvd1: <Sabrent> NVMe namespace [...] nvd1: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0099) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0099) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0099) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 CAM usbus1 usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <KINGSTON SA400S37240G SBFKB1D1> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SU650 P181106a> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 238475MB (488397168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] uhub0: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] uhub1: 14 ports with 14 removable, self powered [...] ugen2.2: <Microsoft Comfort Curve Keyboard 2000> at usbus2 [...] ukbd0 on uhub2 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus2 [...] ugen0.2: <Corsair Memory, Inc. Integrated USB Bridge> at usbus0 [...] ugen2.3: <SteelSeries SteelSeries Rival 110 Gaming Mouse> at usbus2 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] pcm6 port 0xe000-0xe0ff irq 31 at device 4.0 on pci8 [...] pcm6: MPU401 found [...] pcm6: i2c timeout [...] pcm6: channel0 (Multichannel) [...] sysctl_warn_reuse: can't re-use a leaf (dev.pcm.6.buffersize)! [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub1 [...] uhid0: <Corsair Memory, Inc. Integrated USB Bridge, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid2 on uhub1 [...] uhid2: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus2 [...] uhid3 on uhub2 [...] uhid3: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0 on uhub2 [...] ums0: <SteelSeries SteelSeries Rival 110 Gaming Mouse, class 0/0, rev 1.10/0.36, addr 2> on usbus2 [...] ums0: 6 buttons and [XYZ] coordinates ID=0 [...] re0: link state changed to UP [...] Failed to fully fault in a core file segment at VA 0x805e00000 with size 0x4000000000 to be written at offset 0x2de4000 for process baloo_file [...] pid 1296 (baloo_file), jid 0, uid 1001: exited on signal 4 (core dumped)