[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p8 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2600.05-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x60fb1 Family=0xf Model=0x6b Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> [...] SVM: NAsids=64 [...] real memory = 6442450944 (6144 MB) [...] avail memory = 6184284160 (5897 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <MSIISM OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 1.1> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <MSIISM OEMRSDT> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0 [...] Timecounter "HPET" frequency 25000000 Hz quality 950 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ohci0: <nVidia nForce MCP55 USB Controller> mem 0xfeafb000-0xfeafbfff irq 22 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 23 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] hdac0: <NVIDIA MCP55 HDA Controller> mem 0xfeaf4000-0xfeaf7fff irq 21 at device 6.1 on pci0 [...] nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xd480-0xd487 mem 0xfeaf9000-0xfeaf9fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20 at device 8.0 on pci0 [...] miibus0: <MII bus> on nfe0 [...] ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 0 on miibus0 [...] ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] nfe0: Using defaults for TSO: 65518/35/2048 [...] nfe0: Ethernet address: ... [...] nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xd400-0xd407 mem 0xfeaf8000-0xfeaf8fff,0xfeafa000-0xfeafa0ff,0xfeaf3c00-0xfeaf3c0f irq 20 at device 9.0 on pci0 [...] miibus1: <MII bus> on nfe1 [...] ciphy1: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus1 [...] ciphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] nfe1: Using defaults for TSO: 65518/35/2048 [...] nfe1: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xfebe0000-0xfebfffff irq 16 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac1: <ATI RV810 HDA Controller> mem 0xfebbc000-0xfebbffff irq 17 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model IntelliMouse, device ID 3 [...] powernow0: <PowerNow! K8> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC883 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC883 (Analog 5.1+HP/2.0)> at nid 20,22,21,27 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC883 (Rear Digital)> at nid 30 on hdaa0 [...] pcm2: <Realtek ALC883 (Front Analog Mic)> at nid 25 on hdaa0 [...] hdacc1: <ATI R6xx HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <ATI R6xx Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <ATI R6xx (HDMI)> at nid 3 on hdaa1 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ada0 at ata0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3120026A 3.06> ATA-6 device [...] ada0: Serial Number... [...] ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) [...] ada0: 114473MB (234441648 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 10 ports with 10 removable, self powered [...] uhub0: 10 ports with 10 removable, self powered [...] ugen0.2: <Plus More Enterprise LTD. USB-compliant keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Plus More Enterprise LTD. USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <Generic Mass Storage Device> at usbus1 [...] umass0 on uhub0 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.29, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus2 target 0 lun 1 [...] da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus2 target 0 lun 2 [...] da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus2 target 0 lun 3 [...] da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1787:0x3000 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: PARK [...] drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 3123896 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 1024M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading CEDAR Microcode [...] drmn0: successfully loaded firmware image with name: radeon/CEDAR_pfp.bin [...] drmn0: successfully loaded firmware image with name: radeon/CEDAR_me.bin [...] drmn0: successfully loaded firmware image with name: radeon/CEDAR_rlc.bin [...] drmn0: successfully loaded firmware image with name: radeon/CEDAR_smc.bin [...] [drm] Internal thermal controller with fan control [...] [drm] radeon: dpm initialized [...] drmn0: successfully loaded firmware image with name: radeon/CYPRESS_uvd.bin [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80010583c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80010583c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xfffff800c005c418 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 0 usecs [...] [drm] ring test on 3 succeeded in 1 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 3 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-I-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-I-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] HDMI-A-1 [...] [drm] HPD2 [...] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY1 [...] [drm] Connector 1: [...] [drm] DVI-I-1 [...] [drm] HPD4 [...] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 2: [...] [drm] VGA-1 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [...] [drm] fb mappable at 0xC034D000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc034d000 vbase=0xfffff800c034d000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] lo0: link state changed to UP [...] nfe0: link state changed to DOWN [...] nfe1: link state changed to DOWN [...] nfe0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <Plus More Enterprise LTD. USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 0 buttons and [XYZ] coordinates ID=3 [...] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2600.05-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x60fb1 Family=0xf Model=0x6b Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> [...] SVM: NAsids=64 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] tun0: link state changed to UP [...] tun1: link state changed to UP [...] pid 8565 (lxsession), jid 0, uid 1000: exited on signal 11 [...] pid 15433 (lxsession), jid 0, uid 1000: exited on signal 11 [...] pid 16115 (lxsession), jid 0, uid 1000: exited on signal 11 [...] pid 16933 (lxsession), jid 0, uid 1000: exited on signal 11 [...] pid 17355 (lxsession), jid 0, uid 1000: exited on signal 11 [...] pid 18006 (lxsession), jid 0, uid 1000: exited on signal 11 [...] [drm] amdgpu kernel modesetting enabled.