[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250445-fb81510bd0e SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] CPU: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (1600.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16498716672 (15734 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 3 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81515000-0x815157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81500000-0x8150ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0x81510000-0x81513fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: turning off MSI enable bit. [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] pci3: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x81517000-0x81517fff irq 45 on acpi0 [...] mmc0: <MMC/SD bus> on sdhci_acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1599946579 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC892 (Left Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Braswell (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] pcm3: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm4: <Intel Braswell (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 500GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 696 files 8 [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic USB2.0-CRW> at usbus0 [...] umass0 on uhub1 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0 [...] ugen0.5: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 4> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.6: <HEWLETT-PACKARD Hewlett-Packard TFT7600 RKM> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <HEWLETT-PACKARD Hewlett-Packard TFT7600 RKM, class 0/0, rev 1.10/1.04, addr 5> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.7: <Tripp Lite Tripp Lite UPS> at usbus0