[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8095846400 (7720 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 5 4 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9eef7000-0x9eef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0x4020-0x403f mem 0xc1820000-0xc183ffff,0xc1400000-0xc17fffff,0xc1844000-0xc1847fff at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x4000-0x401f mem 0xc1800000-0xc181ffff,0xc1000000-0xc13fffff,0xc1840000-0xc1843fff at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc1b00000-0xc1b0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc1b10000-0xc1b11fff,0xc1b16000-0xc1b160ff,0xc1b15000-0xc1b157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc1a00000-0xc1a03fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc1904000-0xc1904fff,0xc1900000-0xc1903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999684 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 200MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN770 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 64 files 18 [...] uhub0: 22 ports with 22 removable, self powered [...] igb1: link state changed to UP [...] re0: link state changed to DOWN [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000107000-0x4000107fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000104000-0x40001040ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'vlan0.10' [...] vlan1: changing name to 'vlan0.20' [...] vlan2: changing name to 'vlan0.200' [...] vlan3: changing name to 'vlan0.5' [...] vlan4: changing name to 'vlan0.50' [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0.50: link state changed to DOWN [...] vlan0.200: link state changed to DOWN [...] vlan0.5: link state changed to DOWN [...] vlan0.20: link state changed to DOWN [...] vlan0.10: link state changed to DOWN [...] 813.035039 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] 813.079869 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 813.532092 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb1: link state changed to DOWN [...] vlan0.50: link state changed to DOWN [...] vlan0.200: link state changed to DOWN [...] vlan0.5: link state changed to DOWN [...] vlan0.20: link state changed to DOWN [...] vlan0.10: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 17, rcvif igb1, outif igb0 [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb1: link state changed to DOWN [...] vlan0.50: link state changed to DOWN [...] vlan0.200: link state changed to DOWN [...] vlan0.5: link state changed to DOWN [...] vlan0.20: link state changed to DOWN [...] vlan0.10: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb1: link state changed to DOWN [...] vlan0.50: link state changed to DOWN [...] vlan0.200: link state changed to DOWN [...] vlan0.5: link state changed to DOWN [...] vlan0.20: link state changed to DOWN [...] vlan0.10: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8095846400 (7720 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 5 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9eef7000-0x9eef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0x4020-0x403f mem 0xc1820000-0xc183ffff,0xc1400000-0xc17fffff,0xc1844000-0xc1847fff at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x4000-0x401f mem 0xc1800000-0xc181ffff,0xc1000000-0xc13fffff,0xc1840000-0xc1843fff at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc1b00000-0xc1b0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc1b10000-0xc1b11fff,0xc1b16000-0xc1b160ff,0xc1b15000-0xc1b157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc1a00000-0xc1a03fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc1904000-0xc1904fff,0xc1900000-0xc1903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999283 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 200MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN770 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 22 ports with 22 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] re0: link state changed to DOWN [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000107000-0x4000107fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000104000-0x40001040ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'vlan0.10' [...] vlan1: changing name to 'vlan0.20' [...] vlan2: changing name to 'vlan0.200' [...] vlan3: changing name to 'vlan0.5' [...] vlan4: changing name to 'vlan0.50' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] 044.697435 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] 044.746506 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 045.194284 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] igb0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8095846400 (7720 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 5 2 1 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9eef7000-0x9eef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0x4020-0x403f mem 0xc1820000-0xc183ffff,0xc1400000-0xc17fffff,0xc1844000-0xc1847fff at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x4000-0x401f mem 0xc1800000-0xc181ffff,0xc1000000-0xc13fffff,0xc1840000-0xc1843fff at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc1b00000-0xc1b0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc1b10000-0xc1b11fff,0xc1b16000-0xc1b160ff,0xc1b15000-0xc1b157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc1a00000-0xc1a03fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc1904000-0xc1904fff,0xc1900000-0xc1903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999053 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 200MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN770 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 22 ports with 22 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] re0: link state changed to DOWN [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000107000-0x4000107fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000104000-0x40001040ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'vlan0.10' [...] vlan1: changing name to 'vlan0.20' [...] vlan2: changing name to 'vlan0.200' [...] vlan3: changing name to 'vlan0.5' [...] vlan4: changing name to 'vlan0.50' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] wg1: promiscuous mode enabled [...] 150.046613 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] 150.175365 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 150.628297 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] wg1: promiscuous mode disabled [...] igb0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8095846400 (7720 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 4 2 1 5 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9eef7000-0x9eef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0x4020-0x403f mem 0xc1820000-0xc183ffff,0xc1400000-0xc17fffff,0xc1844000-0xc1847fff at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x4000-0x401f mem 0xc1800000-0xc181ffff,0xc1000000-0xc13fffff,0xc1840000-0xc1843fff at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc1b00000-0xc1b0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc1b10000-0xc1b11fff,0xc1b16000-0xc1b160ff,0xc1b15000-0xc1b157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc1a00000-0xc1a03fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc1904000-0xc1904fff,0xc1900000-0xc1903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999567 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 200MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN770 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 22 ports with 22 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] re0: link state changed to DOWN [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000107000-0x4000107fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000104000-0x40001040ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'vlan0.10' [...] vlan1: changing name to 'vlan0.20' [...] vlan2: changing name to 'vlan0.200' [...] vlan3: changing name to 'vlan0.5' [...] vlan4: changing name to 'vlan0.50' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.200: link state changed to UP [...] vlan0.5: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.10: link state changed to UP [...] igb0: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] wg1: promiscuous mode enabled [...] 810.879778 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] 810.975368 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 811.422783 [ 851] iflib_netmap_config txr 6 rxr 6 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode disabled [...] lo0: promiscuous mode disabled [...] wg1: promiscuous mode disabled [...] igb0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 1 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250411-85724e9ce22 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8095846400 (7720 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 5 2 4 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9eef7000-0x9eef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0x4020-0x403f mem 0xc1820000-0xc183ffff,0xc1400000-0xc17fffff,0xc1844000-0xc1847fff at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x4000-0x401f mem 0xc1800000-0xc181ffff,0xc1000000-0xc13fffff,0xc1840000-0xc1843fff at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc1b00000-0xc1b0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc1b10000-0xc1b11fff,0xc1b16000-0xc1b160ff,0xc1b15000-0xc1b157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc1a00000-0xc1a03fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc1904000-0xc1904fff,0xc1900000-0xc1903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999558 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 200MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN770 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...