[...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ixl3: Media change is not supported. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.13-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 6 10 1 11 7 2 3 4 5 9 8 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub0 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl3: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] re0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.14-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 8 2 3 1 6 4 7 5 9 10 11 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub0 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] re0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: Media change is not supported. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: Media change is not supported. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: Media change is not supported. [...] ixl3: Media change is not supported. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.14-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 10 1 6 4 7 5 3 2 9 8 11 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 6 ports with 6 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 14 ports with 14 removable, self powered [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub2 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] ixl3: Media change is not supported. [...] re0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl3: Media change is not supported. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] re0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.15-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 8 1 6 3 7 2 4 10 11 5 9 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub0 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] re0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl0: link state changed to DOWN [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.14-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 11 1 8 5 9 4 3 7 6 2 10 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 6 ports with 6 removable, self powered [...] uhub0: 6 ports with 6 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] uhub2: 14 ports with 14 removable, self powered [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub2 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] re0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl0 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD Ryzen 5 PRO 4650G with Radeon Graphics (3693.15-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32739336192 (31222 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 10 1 8 3 9 7 5 6 2 4 11 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe2000000-0xe27fffff,0xe3018000-0xe301ffff at device 0.0 on pci1 [...] ixl0: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1800000-0xe1ffffff,0xe3010000-0xe3017fff at device 0.1 on pci1 [...] ixl0: link state changed to DOWN [...] ixl1: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe1000000-0xe17fffff,0xe3008000-0xe300ffff at device 0.2 on pci1 [...] ixl2: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.1.0-k> mem 0xe0800000-0xe0ffffff,0xe3000000-0xe3007fff at device 0.3 on pci1 [...] ixl3: fw 5.0.40043 api 1.5 nvm 5.04 etid 800024da oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfca00000-0xfca7ffff at device 0.0 on pci8 [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfca80000-0xfca83fff at device 0.1 on pci8 [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff at device 0.4 on pci8 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 980 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub0: 14 ports with 14 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ugen0.2: <NOVATEK USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <ASRock LED Controller> at usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub0 [...] uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <ASRock LED Controller, class 0/0, rev 1.10/0.00, addr 2> on usbus0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] re0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled