[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p7-HBSD #0 427d53bc125(stable/20.7)-dirty: Sun Jul 26 05:51:42 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3402.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66810249216 (63715 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-47 on motherboard [...] Launching APs: 1 8 3 6 7 2 11 9 4 10 5 [...] Timecounter "TSC-low" frequency 1701101218 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812507c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xfb800000-0xfb81ffff,0xfb828000-0xfb828fff irq 18 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb827000-0xfb8273ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xfb820000-0xfb823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfb7c0000-0xfb7dffff,0xfb700000-0xfb77ffff,0xfb7e0000-0xfb7e3fff irq 16 at device 0.0 on pci5 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb600000-0xfb607fff irq 17 at device 0.0 on pci6 [...] xhci0: 32 bytes context size, 32-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb500000-0xfb507fff irq 18 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb400000-0xfb407fff irq 19 at device 0.0 on pci8 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfb300000-0xfb3001ff irq 16 at device 0.0 on pci9 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <serial bus, FireWire> at device 0.0 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <Marvell 88SE9130 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xfb110000-0xfb1107ff irq 19 at device 0.0 on pci11 [...] ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci1: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ahcich8: <AHCI channel> at channel 6 on ahci1 [...] ahcich9: <AHCI channel> at channel 7 on ahci1 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb826000-0xfb8263ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb825000-0xfb8257ff irq 20 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich10: <AHCI channel> at channel 0 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci2 [...] device_attach: ahciem0 attach returned 6 [...] pcib13: <ACPI Host-PCI bridge> on acpi0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich10 bus 0 scbus10 target 0 lun 0 [...] ada0: <Crucial CT525MX300SSD1 M0CR060> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 500786MB (1025610768 512 byte sectors) [...] pass0 at ahcich9 bus 0 scbus9 target 0 lun 0 [...] pass0: <Marvell 91xx Config 1.01> Removable Processor SCSI device [...] pass0: Serial Number... [...] pass0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub5 on uhub4 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub6 on uhub3 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub6: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] ugen4.3: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub7 on uhub5 [...] uhub7: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus4 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen4.4: <vendor 0x0557 product 0x8021> at usbus4 [...] uhub8 on uhub7 [...] uhub8: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 4> on usbus4 [...] uhub8: 4 ports with 4 removable, self powered [...] ugen4.5: <ATEN product 0x2260> at usbus4 [...] ukbd0 on uhub8 [...] ukbd0: <Kb> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.6: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub9 on uhub7 [...] uhub9: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 6> on usbus4 [...] uhub9: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ugen4.7: <Logitech USB Receiver> at usbus4 [...] ukbd1 on uhub9 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] kbd3 at ukbd1 [...] ums0 on uhub8 [...] ums0: <Ms> on usbus4 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] ums1 on uhub9 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] ums1: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pid 14575 (syslog-ng), jid 0, uid 0: exited on signal 11 (core dumped) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ugen4.6: <vendor 0x1a40 USB 2.0 Hub> at usbus4 (disconnected) [...] uhub9: at uhub7, port 2, addr 6 (disconnected) [...] ugen4.7: <Logitech USB Receiver> at usbus4 (disconnected) [...] ukbd1: at uhub9, port 2, addr 7 (disconnected) [...] ukbd1: detached [...] ums1: at uhub9, port 2, addr 7 (disconnected) [...] ums1: detached [...] uhub9: detached [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ugen4.6: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub9 on uhub7 [...] uhub9: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 6> on usbus4 [...] uhub9: 4 ports with 4 removable, self powered [...] ugen4.7: <Logitech USB Receiver> at usbus4 [...] ukbd1 on uhub9 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] kbd3 at ukbd1 [...] ums1 on uhub9 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] ums1: 18 buttons and [XYZT] coordinates ID=2 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pid 92704 (syslog-ng), jid 0, uid 0: exited on signal 11 (core dumped) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 243 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3402.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66808152064 (63713 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-47 on motherboard [...] Launching APs: 1 8 5 3 2 4 10 7 6 11 9 [...] Timecounter "TSC-low" frequency 1701099322 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xfb800000-0xfb81ffff,0xfb828000-0xfb828fff irq 18 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb827000-0xfb8273ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xfb820000-0xfb823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfb7c0000-0xfb7dffff,0xfb700000-0xfb77ffff,0xfb7e0000-0xfb7e3fff irq 16 at device 0.0 on pci5 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb600000-0xfb607fff irq 17 at device 0.0 on pci6 [...] xhci0: 32 bytes context size, 32-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb500000-0xfb507fff irq 18 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb400000-0xfb407fff irq 19 at device 0.0 on pci8 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfb300000-0xfb3001ff irq 16 at device 0.0 on pci9 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <serial bus, FireWire> at device 0.0 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <Marvell 88SE9130 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xfb110000-0xfb1107ff irq 19 at device 0.0 on pci11 [...] ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci1: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ahcich8: <AHCI channel> at channel 6 on ahci1 [...] ahcich9: <AHCI channel> at channel 7 on ahci1 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb826000-0xfb8263ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb825000-0xfb8257ff irq 20 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich10: <AHCI channel> at channel 0 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci2 [...] device_attach: ahciem0 attach returned 6 [...] pcib13: <ACPI Host-PCI bridge> on acpi0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich10 bus 0 scbus10 target 0 lun 0 [...] ada0: <Crucial CT525MX300SSD1 M0CR060> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 500786MB (1025610768 512 byte sectors) [...] pass0 at ahcich9 bus 0 scbus9 target 0 lun 0 [...] pass0: <Marvell 91xx Config 1.01> Removable Processor SCSI device [...] pass0: Serial Number... [...] pass0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen4.3: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub7 on uhub6 [...] uhub7: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus4 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen4.4: <vendor 0x0557 product 0x8021> at usbus4 [...] uhub8 on uhub7 [...] uhub8: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 4> on usbus4 [...] uhub8: 4 ports with 4 removable, self powered [...] ugen4.5: <ATEN product 0x2260> at usbus4 [...] ukbd0 on uhub8 [...] ukbd0: <Kb> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.6: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub9 on uhub7 [...] uhub9: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 6> on usbus4 [...] uhub9: 4 ports with 4 removable, self powered [...] ugen4.7: <Logitech USB Receiver> at usbus4 [...] ukbd1 on uhub9 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] kbd3 at ukbd1 [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ums0 on uhub8 [...] ums0: <Ms> on usbus4 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] ums1 on uhub9 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] ums1: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: permanently promiscuous mode enabled [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 5 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (3402.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66808152064 (63713 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-47 on motherboard [...] Launching APs: 1 5 9 8 3 2 11 6 10 4 7 [...] Timecounter "TSC-low" frequency 1701101860 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xfb800000-0xfb81ffff,0xfb828000-0xfb828fff irq 18 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb827000-0xfb8273ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xfb820000-0xfb823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfb7c0000-0xfb7dffff,0xfb700000-0xfb77ffff,0xfb7e0000-0xfb7e3fff irq 16 at device 0.0 on pci5 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb600000-0xfb607fff irq 17 at device 0.0 on pci6 [...] xhci0: 32 bytes context size, 32-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb500000-0xfb507fff irq 18 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb400000-0xfb407fff irq 19 at device 0.0 on pci8 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfb300000-0xfb3001ff irq 16 at device 0.0 on pci9 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <serial bus, FireWire> at device 0.0 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <Marvell 88SE9130 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xfb110000-0xfb1107ff irq 19 at device 0.0 on pci11 [...] ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci1: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich4: <AHCI channel> at channel 2 on ahci1 [...] ahcich5: <AHCI channel> at channel 3 on ahci1 [...] ahcich6: <AHCI channel> at channel 4 on ahci1 [...] ahcich7: <AHCI channel> at channel 5 on ahci1 [...] ahcich8: <AHCI channel> at channel 6 on ahci1 [...] ahcich9: <AHCI channel> at channel 7 on ahci1 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb826000-0xfb8263ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb825000-0xfb8257ff irq 20 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich10: <AHCI channel> at channel 0 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci2 [...] device_attach: ahciem0 attach returned 6 [...] pcib13: <ACPI Host-PCI bridge> on acpi0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ada0 at ahcich10 bus 0 scbus10 target 0 lun 0 [...] ada0: <Crucial CT525MX300SSD1 M0CR060> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 500786MB (1025610768 512 byte sectors) [...] pass0 at ahcich9 bus 0 scbus9 target 0 lun 0 [...] pass0: <Marvell 91xx Config 1.01> Removable Processor SCSI device [...] pass0: Serial Number... [...] pass0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub6 on uhub4 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen4.3: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub7 on uhub6 [...] uhub7: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus4 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen4.4: <vendor 0x0557 product 0x8021> at usbus4 [...] uhub8 on uhub7 [...] uhub8: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 4> on usbus4 [...] uhub8: 4 ports with 4 removable, self powered [...] ugen4.5: <ATEN product 0x2260> at usbus4 [...] ukbd0 on uhub8 [...] ukbd0: <Kb> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.6: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub9 on uhub7 [...] uhub9: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 6> on usbus4 [...] uhub9: 4 ports with 4 removable, self powered [...] ugen4.7: <Logitech USB Receiver> at usbus4 [...] ukbd1 on uhub9 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] kbd3 at ukbd1 [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ums0 on uhub8 [...] ums0: <Ms> on usbus4 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] ums1 on uhub9 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 7> on usbus4 [...] ums1: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: permanently promiscuous mode enabled [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled