[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2500.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8230334464 (7849 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <APPLE Apple00> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8ed3b000-0x8ed3b01e [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <APPLE Apple00> [...] acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0x90000000-0x9fffffff,0xa8800000-0xa881ffff at device 0.0 on pci1 [...] hdac0: <ATI RV930 HDA Controller> mem 0xa8840000-0xa8843fff at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib8 [...] bge0: <Thunderbolt Ethernet, ASIC rev. 0x57766000> mem 0xacf00000-0xacf0ffff,0xacf10000-0xacf1ffff at device 0.0 on pci7 [...] bge0: CHIP ID 0x57766000; ASIC REV 0x57766; CHIP REV 0x577660; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci3 [...] pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] vgapci1: <VGA-compatible display> port 0x3000-0x303f mem 0xa8000000-0xa83fffff,0xa0000000-0xa7ffffff at device 2.0 on pci0 [...] vgapci1: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uhci0: <UHCI (generic) USB controller> port 0x3120-0x313f at device 26.0 on pci0 [...] uhci0: LegSup = 0x2400 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xa8906c00-0xa8906fff at device 26.7 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xa8900000-0xa8903fff at device 27.0 on pci0 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib11 [...] bge1: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xa8400000-0xa840ffff,0xa8410000-0xa841ffff at device 0.0 on pci8 [...] bge1: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM57765 1000BASE-T media interface> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] sdhci_pci0: <Broadcom BCM577xx SDXC/MMC Card Reader> mem 0xa8420000-0xa842ffff at device 0.1 on pci8 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib12: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib12 [...] pci9: <network> at device 0.0 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci10: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> at device 0.0 on pci10 [...] pci11: <ACPI PCI bus> on pcib14 [...] pci11: <serial bus, FireWire> at device 0.0 (no driver attached) [...] uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df at device 29.0 on pci0 [...] uhci1: LegSup = 0x2400 [...] usbus2 on uhci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xa8906800-0xa8906bff at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x3148-0x314f,0x315c-0x315f,0x3140-0x3147,0x3158-0x315b,0x3060-0x307f mem 0xa8906000-0xa89067ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1250008813 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Cirrus Logic CS4206 (Analog)> at nid 11 and 12 on hdaa1 [...] pcm2: <Cirrus Logic CS4206 (Digital)> at nid 16 and 15 on hdaa1 [...] pcm3: <Cirrus Logic CS4206 (Analog Headphones)> at nid 10 on hdaa1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus3 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub3 on usbus2 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA MK5065GSXF GP006B> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <M4-CT128M4SSD2 040H> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 122104MB (250069680 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub3: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] uhub2: 6 ports with 6 removable, self powered [...] ugen1.2: <vendor 0x0424 product 0x2513> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2> on usbus1 [...] uhub4: MTT enabled [...] Root mount waiting for: usbus1 usbus3 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub4: 3 ports with 2 removable, self powered [...] ugen3.2: <vendor 0x0424 product 0x2513> at usbus3 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2> on usbus3 [...] uhub5: MTT enabled [...] ugen1.3: <Apple Inc. BRCM20702 Hub> at usbus1 [...] uhub6 on uhub4 [...] uhub6: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1 [...] Root mount waiting for: usbus1 usbus3 [...] uhub5: 3 ports with 2 removable, self powered [...] uhub6: 3 ports with 0 removable, self powered [...] ugen3.3: <Apple Computer, Inc. IR Receiver> at usbus3 [...] ugen1.4: <vendor 0x05ac product 0x820a> at usbus1 [...] ukbd0 on uhub6 [...] ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus1 [...] kbd1 at ukbd0 [...] ugen1.5: <vendor 0x05ac product 0x820b> at usbus1 [...] ugen1.6: <Apple Inc. Bluetooth USB Host Controller> at usbus1