[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p9 n245432-de4561397a1 TRUENAS amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): text 80x25 [...] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (3503.56-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33227845632 (31688 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 6 2 3 7 4 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] padlock0: No ACE support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xd81b0000-0xd81bffff,0xd81a0000-0xd81affff,0xd8190000-0xd819ffff irq 16 at device 0.0 on pci1 [...] bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xd8180000-0xd818ffff,0xd8170000-0xd817ffff,0xd8160000-0xd816ffff irq 17 at device 0.1 on pci1 [...] bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xd8150000-0xd815ffff,0xd8140000-0xd814ffff,0xd8130000-0xd813ffff irq 16 at device 0.2 on pci1 [...] bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus2: <MII bus> on bge2 [...] brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xd8120000-0xd812ffff,0xd8110000-0xd811ffff,0xd8100000-0xd810ffff irq 17 at device 0.3 on pci1 [...] bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus3: <MII bus> on bge3 [...] brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe7400000-0xe77fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xefd00000-0xefd0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xefd18000-0xefd183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pci0: <multimedia, HDA> at device 27.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xefb00000-0xefb00fff irq 16 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd8004000-0xd8004fff,0xd8000000-0xd8003fff irq 18 at device 0.0 on pci6 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus4: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus4 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 16 at device 1.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] ahci0: <Marvell 88SE9215 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xef910000-0xef9107ff irq 16 at device 0.0 on pci9 [...] ahci0: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] pcib10: <PCI-PCI bridge> irq 17 at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 18 at device 3.0 on pci8 [...] pci11: <PCI bus> on pcib11 [...] ahci1: <Marvell 88SE9215 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xef810000-0xef8107ff irq 18 at device 0.0 on pci11 [...] ahci1: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xefd17000-0xefd173ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xefd16000-0xefd167ff irq 19 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] ahcich10: <AHCI channel> at channel 2 on ahci2 [...] ahcich11: <AHCI channel> at channel 3 on ahci2 [...] ahcich12: <AHCI channel> at channel 4 on ahci2 [...] ahcich13: <AHCI channel> at channel 5 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> on ahci2 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] ichwd0: ICH WDT present but disabled in BIOS or hardware [...] device_attach: ichwd0 attach returned 6 [...] ichwd0: <Intel Panther Point watchdog timer> at port 0x430-0x437,0x460-0x47f on isa0 [...] ichwd0: ICH WDT present but disabled in BIOS or hardware [...] device_attach: ichwd0 attach returned 6 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xd1fff,0xd2000-0xd57ff pnpid ORM0000 on isa0 [...] superio0: <ITE IT8728 SuperIO (revision 0x01)> at port 0x2e-0x2f on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1751722809 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled [...] Trying to mount root from zfs:freenas-boot/ROOT/13.0-U6.4 []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen2.1: <(0x1106) XHCI root HUB> at usbus2 [...] uhub3 on usbus2 [...] uhub3: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] pmp0 at ahcich7 bus 0 scbus7 target 15 lun 0 [...] pmp0: <Port Multiplier 97051b4b a00e> ATA device [...] pmp0: 600.000MB/s transfers (SATA 3.x, NONE, PIO 8192bytes) [...] pmp0: 5 fan-out ports [...] uhub3: 5 ports with 4 removable, self powered [...] uhub0: 8 ports with 8 removable, self powered [...] ugen2.2: <vendor 0x2109 USB2.0 Hub> at usbus2 [...] uhub4 on uhub3 [...] uhub4: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus2 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ses0 at ahciem0 bus 0 scbus14 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <SanDisk SDSSDA120G Z32080RL> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] Root mount waiting for: usbus1 usbus2 CAM usbus3 [...] ada1 at ahcich6 bus 0 scbus6 target 0 lun 0 [...] ada1: <ST16000NT001-3LV101 EN01> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 15259648MB (31251759104 512 byte sectors) [...] ada2 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada2: <ST16000NT001-3LV101 EN01> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 15259648MB (31251759104 512 byte sectors) [...] uhub4: 4 ports with 4 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub6 on uhub2 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] ugen2.3: <No brand KVM> at usbus2 [...] ukbd0 on uhub4 [...] ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus2 [...] kbd2 at ukbd0 [...] ums0 on uhub4 [...] ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus2 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus3 [...] uhub6: 8 ports with 8 removable, self powered [...] warning: KLD '/boot/kernel/ichsmb.ko' is newer than the linker.hints file [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xefd15000-0xefd150ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] warning: KLD '/boot/kernel/vmm.ko' is newer than the linker.hints file [...] re0: link state changed to UP [...] warning: KLD '/boot/kernel/ctl.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/dtraceall.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/opensolaris.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/dtrace.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/dtmalloc.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/dtnfscl.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/fbt.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/fasttrap.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/sdt.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/systrace.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/systrace_freebsd32.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/profile.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/geom_multipath.ko' is newer than the linker.hints file [...] GEOM_MIRROR: Device mirror/swap0 launched (2/2). [...] GEOM_ELI: Device mirror/swap0.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (3503.45-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] re0: link state changed to DOWN [...] vlan220: link state changed to DOWN [...] nfsd: can't register svc name [...] hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> [...] warning: KLD '/boot/kernel/t4_tom.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/toecore.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/iscsi.ko' is newer than the linker.hints file