[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-STABLE GENERIC amd64 [...] FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7875891200 (7511 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL EDK2 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6dc4e000-0x6dc4e01e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broxton-P HDA Controller> mem 0x91410000-0x91413fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91414000-0x91415fff,0x91418000-0x914180ff,0x91417000-0x914177ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91304000-0x91304fff,0x91300000-0x91303fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0x91200000-0x912001ff at device 0.0 on pci3 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em0: <Intel(R) PRO/1000 PT 82572EI (Copper)> port 0xc000-0xc01f mem 0x91140000-0x9115ffff,0x91120000-0x9113ffff at device 0.0 on pci4 [...] em0: EEPROM V5.11-10 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600199 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST9160821AS 3.CDD> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 152627MB (312581808 512 byte sectors) [...] uhub0: 15 ports with 15 removable, self powered [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x046d HD Pro Webcam C920> at usbus0 [...] uaudio0 on uhub1 [...] uaudio0: <vendor 0x046d HD Pro Webcam C920, class 239/2, rev 2.00/0.11, addr 2> on usbus0 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm4 on uaudio0 [...] uaudio0: No HID volume keys found. [...] ugen0.4: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.30, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <Logitech USB-PS/2 Optical Mouse> at usbus0 [...] Cuse v0.1.37 @ /dev/cuse [...] [drm] Got Intel graphics stolen memory base 0x70000000, size 0x10000000 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic3: <LinuxKPI I2C> on drm1 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drm2 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] drmn0: successfully loaded firmware image 'i915/bxt_dmc_ver1_07.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) [...] VT: Replacing driver "efifb" with new "drmfb". [...] start FB_INFO: [...] height=2160 width=3840 depth=32 [...] pbase=0x803c0000 vbase=0xfffff800803c0000 [...] name=drmn0 id=i915drmfb flags=0x0 stride=15360 [...] end FB_INFO [...] ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91416000-0x914160ff at device 31.1 on pci0 [...] pcib0: no PRT entry for 0.31.INTA [...] ichsmb0: can't get IRQ [...] device_attach: ichsmb0 attach returned 6 [...] re0: link state changed to DOWN [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.30, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] ums1 on uhub1 [...] ums1: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/30.00, addr 4> on usbus0 [...] ums1: 8 buttons and [XYZ] coordinates ID=0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled