[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250445-fb81510bd0e SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD PRO A4-8350B R5, 6 Compute Cores 2C+4G (3493.63-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x630f81 Family=0x15 Model=0x38 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> [...] Structured Extended Features=0x9<FSGSBASE,BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8087547904 (7712 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM 805A > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 4 != hw id 0 [...] ioapic1: MADT APIC ID 5 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbe1cb000-0xbe1cb01e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x8> port 0x62,0x66 on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xc8000000-0xc87fffff,0xc8c00000-0xc8c3ffff at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1308) HDA Controller> mem 0xc8c40000-0xc8c43fff at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc8b00000-0xc8b00fff,0xc8900000-0xc8903fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xc8c48000-0xc8c49fff at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xc8c4a000-0xc8c4bfff at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4118-0x411f,0x4124-0x4127,0x4110-0x4117,0x4120-0x4123,0x4100-0x410f mem 0xc8c51000-0xc8c517ff at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xc8c50000-0xc8c50fff at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xc8c4f000-0xc8c4f0ff at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xc8c4e000-0xc8c4efff at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xc8c4d000-0xc8c4d0ff at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xc8c44000-0xc8c47fff at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ohci2: <OHCI (generic) USB controller> mem 0xc8c4c000-0xc8c4cfff at device 20.5 on pci0 [...] usbus6 on ohci2 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0:4:0:0: no valid vpd ident found [...] pci0:4:0:0: failed to read VPD data. [...] bge0: <Broadcom unknown BCM5762, ASIC rev. 0x5762100> mem 0xc8820000-0xc882ffff,0xc8810000-0xc881ffff,0xc8800000-0xc880ffff at device 0.0 on pci4 [...] bge0: CHIP ID 0x05762100; ASIC REV 0x5762; CHIP REV 0x57621; PCI-E [...] miibus1: <MII bus> on bge0 [...] brgphy0: <BCM5725C 1000BASE-T media interface> PHY 1 on miibus1 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1746735847 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm5: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen6.1: <AMD OHCI root HUB> at usbus6 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] uhub0 on usbus6 [...] uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub1 on usbus5 [...] uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] uhub2 on usbus4 [...] uhub3 on usbus2 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub4 on usbus3 [...] uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub5 on usbus0 [...] uhub5: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub6 on usbus1 [...] uhub6: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KingFast T0910A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] cd0: <hp HLDS DVDRW GUD0N SD02> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus3 usbus5 [...] uhub4: 5 ports with 5 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] WARNING: /mnt was not properly dismounted