[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 800x600 [...] [1] CPU microcode: updated from 0xf to 0x1d [...] [1] CPU: Intel(R) N100 (806.40-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x15c0fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 34358689792 (32767 MB) [...] [1] avail memory = 33081475072 (31548 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 1 2 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x67c2b000-0x67c2b017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.5 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x71000000-0x71ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x72410000-0x7241ffff at device 13.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x72400000-0x7240ffff at device 20.0 on pci0 [...] [1] xhci1: 32 bytes context size, 64-bit DMA [...] [1] usbus1 on xhci1 [...] [1] usbus1: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x72428000-0x72429fff,0x7242c000-0x7242c0ff,0x7242b000-0x7242b7ff at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] re0: <Realtek PCIe 2.5GbE Family Controller> port 0x4000-0x40ff mem 0x72300000-0x7230ffff,0x72310000-0x72313fff at device 0.0 on pci1 [...] [1] re0: Using Memory Mapping! [...] [1] re0: Using 1 MSI-X message [...] [1] re0: ASPM disabled [...] [1] re0: version:1.100.00 [...] [1] re0: Ethernet address: ... [...] [1] [...] [1] This product is covered by one or more of the following patents: [...] [1] US6,570,884, US6,115,776, and US6,327,625. [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0x72204000-0x72204fff,0x72200000-0x72203fff at device 0.0 on pci2 [...] [1] re1: Using Memory Mapping! [...] [1] re1: Using 1 MSI-X message [...] [1] re1: ASPM disabled [...] [1] re1: version:1.100.00 [...] [1] re1: Ethernet address: ... [...] [1] [...] [1] This product is covered by one or more of the following patents: [...] [1] US6,570,884, US6,115,776, and US6,327,625. [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] nvme0: <Generic NVMe Device> mem 0x72100000-0x72103fff at device 0.0 on pci3 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x72420000-0x72423fff,0x72000000-0x720fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 806404996 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] nvme0: Allocated 64MB host memory buffer [...] [2] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] [2] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] [2] nda0 at nvme0 bus 0 scbus2 target 0 lun 1 [...] nda0: <KINGSTON SNV3S1000G P3BR0A23 50026B7383C44E5B> [...] nda0: Serial Number... [...] [2] nda0: nvme version 1.4 [...] nda0: 953869MB (1953525168 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] uhub1: 3 ports with 3 removable, self powered [...] [3] uhub0: 16 ports with 16 removable, self powered [...] [3] Root mount waiting for: usbus1 [...] [3] ugen1.2: <Logitech USB Keyboard> at usbus1 [...] [3] ukbd0 on uhub0 [...] [3] ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 1> on usbus1 [...] [3] kbd2 at ukbd0 [...] [4] ugen1.3: <Logitech USB Laser Mouse> at usbus1 [...] [4] ugen1.4: <Asmedia ASM107x> at usbus1 [...] [4] uhub2 on uhub0 [...] [4] uhub2: <Asmedia ASM107x, class 9/0, rev 2.10/2.00, addr 3> on usbus1 [...] [4] uhub2: MTT enabled [...] [4] Root mount waiting for: usbus1 [...] [5] uhub2: 4 ports with 4 removable, self powered [...] [5] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] [5] uhub3 on uhub0 [...] [5] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] [5] uhub3: MTT enabled [...] [6] Root mount waiting for: usbus1 [...] [6] uhub3: 4 ports with 4 removable, self powered [...] [6] ugen1.6: <Asmedia ASM107x> at usbus1 [...] [6] uhub4 on uhub0 [...] [6] uhub4: <Asmedia ASM107x, class 9/0, rev 3.00/2.00, addr 5> on usbus1 [...] [7] Root mount waiting for: usbus1 [...] [7] uhub4: 4 ports with 4 removable, self powered [...] [7] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore