[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] Skipping TSC calibration since no legacy devices reported by FADT and CPUID works [...] CPU: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8072335360 (7698 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC" frequency 1497600000 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x26> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1418000-0xa1419fff,0xa142e000-0xa142e0ff,0xa142d000-0xa142d7ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa1300000-0xa1303fff irq 22 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 22 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xa1100000-0xa111ffff,0xa1120000-0xa1123fff irq 23 at device 0.0 on pci3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa141e000-0xa141efff,0xa141d000-0xa141dfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] sdhci_pci1: <Generic SD HCI> mem 0xa141c000-0xa141cfff,0xa141b000-0xa141bfff irq 42 at device 30.0 on pci0 [...] sdhci_pci1: 1 slot(s) allocated [...] mmc1: <MMC/SD bus> on sdhci_pci1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVLB512HAJQ-000L7> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] mmc0: No compatible cards found on bus [...] mmc1: No compatible cards found on bus [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: /mnt was not properly dismounted [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'igb1_vlan3646' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1_vlan3646: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] Skipping TSC calibration since no legacy devices reported by FADT and CPUID works [...] CPU: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8072335360 (7698 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC" frequency 1497600000 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x26> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1418000-0xa1419fff,0xa142e000-0xa142e0ff,0xa142d000-0xa142d7ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa1300000-0xa1303fff irq 22 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 22 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xa1100000-0xa111ffff,0xa1120000-0xa1123fff irq 23 at device 0.0 on pci3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa141e000-0xa141efff,0xa141d000-0xa141dfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] sdhci_pci1: <Generic SD HCI> mem 0xa141c000-0xa141cfff,0xa141b000-0xa141bfff irq 42 at device 30.0 on pci0 [...] sdhci_pci1: 1 slot(s) allocated [...] mmc1: <MMC/SD bus> on sdhci_pci1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVLB512HAJQ-000L7> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] mmc0: No compatible cards found on bus [...] mmc1: No compatible cards found on bus [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'igb1_vlan3646' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1_vlan3646: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] igb0: link state changed to UP [...] pid 57693 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 82113 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 82842 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 90533 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 97666 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (97666)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 97666 ppid: 57616 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (57616)] Preventing execution due to repeated segfaults. [...] -> pid: 57616 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 36 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p22-HBSD #0 6fd65fcb739(stable/21.7)-dirty: Wed Jan 26 20:48:21 CET 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] Skipping TSC calibration since no legacy devices reported by FADT and CPUID works [...] CPU: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8072335360 (7698 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC" frequency 1497600000 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x26> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1418000-0xa1419fff,0xa142e000-0xa142e0ff,0xa142d000-0xa142d7ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa1300000-0xa1303fff irq 22 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 22 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xa1100000-0xa111ffff,0xa1120000-0xa1123fff irq 23 at device 0.0 on pci3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa141e000-0xa141efff,0xa141d000-0xa141dfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] sdhci_pci1: <Generic SD HCI> mem 0xa141c000-0xa141cfff,0xa141b000-0xa141bfff irq 42 at device 30.0 on pci0 [...] sdhci_pci1: 1 slot(s) allocated [...] mmc1: <MMC/SD bus> on sdhci_pci1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVLB512HAJQ-000L7> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] mmc0: No compatible cards found on bus [...] mmc1: No compatible cards found on bus [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'igb1_vlan3646' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1_vlan3646: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] arp: packet with unknown hardware format 0x06 received on igb1_vlan3646 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p22-HBSD #0 6fd65fcb739(stable/21.7)-dirty: Wed Jan 26 20:48:21 CET 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] Skipping TSC calibration since no legacy devices reported by FADT and CPUID works [...] CPU: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6a<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8072335360 (7698 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC" frequency 1497600000 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x26> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1418000-0xa1419fff,0xa142e000-0xa142e0ff,0xa142d000-0xa142d7ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa1300000-0xa1303fff irq 22 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 22 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xa1100000-0xa111ffff,0xa1120000-0xa1123fff irq 23 at device 0.0 on pci3 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa141e000-0xa141efff,0xa141d000-0xa141dfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] sdhci_pci1: <Generic SD HCI> mem 0xa141c000-0xa141cfff,0xa141b000-0xa141bfff irq 42 at device 30.0 on pci0 [...] sdhci_pci1: 1 slot(s) allocated [...] mmc1: <MMC/SD bus> on sdhci_pci1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVLB512HAJQ-000L7> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] mmc0: No compatible cards found on bus [...] mmc1: No compatible cards found on bus [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] vlan0: changing name to 'igb1_vlan3646' [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1_vlan3646: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded