[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p7 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33304023040 (31761 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 4 6 2 5 3 7 [...] Timecounter "TSC-low" frequency 2000040448 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xdfd00000-0xdfd3ffff at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaac8) HDA Controller> mem 0xdfd60000-0xdfd63fff at device 0.1 on pci1 [...] xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xdfe20000-0xdfe2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xdfe00000-0xdfe1ffff,0xdfe38000-0xdfe38fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xdfe37000-0xdfe373ff at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Wildcat Point HDA Controller> mem 0xdfe30000-0xdfe33fff at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <network> at device 0.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci4 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdfb00000-0xdfb001ff at device 0.0 on pci7 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci4 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci4 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci4 [...] pci10: <ACPI PCI bus> on pcib10 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xdfa00000-0xdfa07fff at device 0.0 on pci10 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <PCI-PCI bridge> at device 7.0 on pci4 [...] pci11: <PCI bus> on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdfc00000-0xdfc001ff at device 0.0 on pci12 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xdfe36000-0xdfe363ff at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Wildcat Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xdfe35000-0xdfe357ff at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich6: <AHCI channel> at channel 2 on ahci2 [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] ahcich8: <AHCI channel> at channel 4 on ahci2 [...] ahcich9: <AHCI channel> at channel 5 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci2 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC1150 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1 [...] pcm8: <Realtek ALC1150 (Front Analog Mic)> at nid 25 on hdaa1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD10EACS-00D6B0 01.01A01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada2: <KINGSTON SV300S37A480G 608ABBF0> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 457862MB (937703088 512 byte sectors) [...] ada3 at ahcich6 bus 0 scbus5 target 0 lun 0 [...] ada3: <ST3500320NS SN06> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 476940MB (976773168 512 byte sectors) [...] ada4 at ahcich7 bus 0 scbus6 target 0 lun 0 [...] ada4: <CT250BX100SSD1 MU01> ACS-2 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada4: Command Queueing enabled [...] ada4: 238475MB (488397168 512 byte sectors) [...] ada5 at ahcich8 bus 0 scbus7 target 0 lun 0 [...] ada5: <CT250BX100SSD1 MU01> ACS-2 ATA SATA 3.x device [...] ada5: Serial Number... [...] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada5: Command Queueing enabled [...] ada5: 238475MB (488397168 512 byte sectors) [...] ada6 at ahcich9 bus 0 scbus8 target 0 lun 0 [...] ada6: <Hitachi HDT721010SLA360 ST6OA31B> ATA8-ACS SATA 2.x device [...] ada6: Serial Number... [...] ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada6: Command Queueing enabled [...] ada6: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus3 usbus2 usbus1 usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x0000 product 0x0000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x0000 product 0x0000, class 9/0, rev 2.00/0.00, addr 1> on usbus2 [...] uhub1: 21 ports with 21 removable, self powered [...] uhub4: 7 ports with 7 removable, bus powered [...] ugen0.2: <Razer Razer Naga 2014> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Razer Razer Naga 2014, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub1 [...] ukbd1: <Razer Razer Naga 2014, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] kbd3 at ukbd1 [...] ugen1.2: <vendor 0x8087 product 0x8009> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8001> at usbus3 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus3 usbus0 [...] uhub6: 8 ports with 8 removable, self powered [...] ugen0.3: <vendor 0x04d9 USB-HID Keyboard> at usbus0 [...] ukbd2 on uhub1 [...] ukbd2: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 2.00/1.06, addr 2> on usbus0 [...] kbd4 at ukbd2 [...] ugen0.4: <Broadcom Corp BCM20702A0> at usbus0 [...] GEOM_PART: Partition 'ada2p3' not suitable for kernel dumps (wrong type?) [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x1682:0x9290 0x00). [...] [drm] register mmio base: 0xDFD00000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [...] [drm] probing mlw for device 1002:67b0 = 400d03 [...] ATOM BIOS: 113-HAWAII_XT_4GB_D5_C671_W81 [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_mc.bin [...] drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [...] drmn0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Detected VRAM RAM=4096M, BAR=256M [...] [drm] RAM width 512bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 16724998 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 4096M of VRAM memory ready [...] [drm] amdgpu: 4096M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_smc.bin [...] [drm] Internal thermal controller with fan control [...] [drm] Invalid PCC GPIO: 13! [...] [drm] amdgpu: dpm initialized [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD2 [...] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD3 [...] [drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957 [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] DVI-D-1 [...] [drm] HPD1 [...] [drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] Connector 3: [...] [drm] DVI-D-2 [...] [drm] HPD6 [...] [drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963 [...] [drm] Encoders: [...] [drm] DFP4: INTERNAL_UNIPHY [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_pfp.bin [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_me.bin [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_ce.bin [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_mec.bin [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_rlc.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_sdma.bin [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_sdma1.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_uvd.bin [...] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: radeon/hawaii_vce.bin [...] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] [drm] PCIE gen 3 link speeds already enabled [...] [drm] UVD initialized successfully. [...] [drm] VCE initialized successfully. [...] [drm] fb mappable at 0xC0427000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1024 width=1280 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0427000 vbase=0xfffff800c0427000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] i_size_write unimplemented [...] [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <Razer Razer Naga 2014, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub1 [...] uhid0: <CYRM02p0295h00D7r0006> on usbus0 [...] ums1 on uhub1 [...] ums1: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 2.00/1.06, addr 2> on usbus0 [...] ums1: 8 buttons and [XYZT] coordinates ID=3 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] Limiting closed port RST response from 290 to 200 packets/sec [...] Limiting closed port RST response from 481 to 200 packets/sec