[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 0c59842367b(stable/21.1)-dirty: Mon Jul 5 15:08:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) D-2123IT CPU @ 2.20GHz (2194.91-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50654 Family=0x6 Model=0x55 Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x8<PKU> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 49732698112 (47428 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] ioapic1 <Version 2.0> irqs 24-31 on motherboard [...] ioapic2 <Version 2.0> irqs 32-39 on motherboard [...] ioapic3 <Version 2.0> irqs 40-47 on motherboard [...] ioapic4 <Version 2.0> irqs 48-55 on motherboard [...] Launching APs: 1 6 2 4 3 7 5 [...] Timecounter "TSC-low" frequency 1097457353 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SUPERM SUPERM> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] device_attach: hpet1 attach returned 12 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pci0: <dasp, performance counters> at device 8.1 (no driver attached) [...] pci0: <unknown> at device 17.0 (no driver attached) [...] pci0: <unknown> at device 17.1 (no driver attached) [...] ahci0: <Intel Lewisburg AHCI SATA controller> port 0x6030-0x6037,0x6020-0x6023,0x6000-0x601f mem 0xaa594000-0xaa595fff,0xaa596000-0xaa5960ff,0xaa500000-0xaa57ffff irq 16 at device 17.5 numa-domain 0 on pci0 [...] ahci0: AHCI v1.31 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xaa580000-0xaa58ffff irq 16 at device 20.0 numa-domain 0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 27.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xaa400000-0xaa403fff irq 16 at device 0.0 numa-domain 0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 0.0 numa-domain 0 on pci3 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa9000000-0xa9ffffff,0xaa000000-0xaa01ffff irq 16 at device 0.0 numa-domain 0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 29.3 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0xaa300000-0xaa37ffff,0xaa380000-0xaa383fff irq 19 at device 0.0 numa-domain 0 on pci6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 29.4 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3060-0x307f mem 0xaa260000-0xaa27ffff,0xaa28c000-0xaa28ffff irq 16 at device 0.0 numa-domain 0 on pci7 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3040-0x305f mem 0xaa240000-0xaa25ffff,0xaa288000-0xaa28bfff irq 17 at device 0.1 numa-domain 0 on pci7 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3020-0x303f mem 0xaa220000-0xaa23ffff,0xaa284000-0xaa287fff irq 18 at device 0.2 numa-domain 0 on pci7 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0xaa200000-0xaa21ffff,0xaa280000-0xaa283fff irq 19 at device 0.3 numa-domain 0 on pci7 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 29.6 numa-domain 0 on pci0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] igb5: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2060-0x207f mem 0xaa160000-0xaa17ffff,0xaa18c000-0xaa18ffff irq 18 at device 0.0 numa-domain 0 on pci8 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb6: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2040-0x205f mem 0xaa140000-0xaa15ffff,0xaa188000-0xaa18bfff irq 19 at device 0.1 numa-domain 0 on pci8 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2020-0x203f mem 0xaa120000-0xaa13ffff,0xaa184000-0xaa187fff irq 16 at device 0.2 numa-domain 0 on pci8 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb8: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0xaa100000-0xaa11ffff,0xaa180000-0xaa183fff irq 17 at device 0.3 numa-domain 0 on pci8 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] pcib9: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] pcib11: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci11 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> mem 0xfbe00000-0xfbe1ffff irq 48 at device 0.0 numa-domain 0 on pci12 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci13 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] ixl0: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.1.0-k> mem 0xfa000000-0xfaffffff,0xfb018000-0xfb01ffff irq 46 at device 0.0 numa-domain 0 on pci14 [...] ixl0: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] ixl0: The driver for the device detected a newer version of the NVM image than expected. [...] ixl0: Please install the most recent version of the network driver. [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 4 RX queues 4 TX queues [...] ixl0: Using MSI-X interrupts with 5 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ixl1: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.1.0-k> mem 0xf9000000-0xf9ffffff,0xfb010000-0xfb017fff irq 46 at device 0.1 numa-domain 0 on pci14 [...] ixl1: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] ixl1: The driver for the device detected a newer version of the NVM image than expected. [...] ixl1: Please install the most recent version of the network driver. [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 4 RX queues 4 TX queues [...] ixl1: Using MSI-X interrupts with 5 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ixl2: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.1.0-k> mem 0xf8000000-0xf8ffffff,0xfb008000-0xfb00ffff irq 46 at device 0.2 numa-domain 0 on pci14 [...] ixl2: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] ixl2: The driver for the device detected a newer version of the NVM image than expected. [...] ixl2: Please install the most recent version of the network driver. [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 4 RX queues 4 TX queues [...] ixl2: Using MSI-X interrupts with 5 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ixl3: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.1.0-k> mem 0xf7000000-0xf7ffffff,0xfb000000-0xfb007fff irq 46 at device 0.3 numa-domain 0 on pci14 [...] ixl3: fw 3.10.52867 api 1.6 nvm 4.00 etid 8000150c oem 1.263.0 [...] ixl3: The driver for the device detected a newer version of the NVM image than expected. [...] ixl3: Please install the most recent version of the network driver. [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 4 RX queues 4 TX queues [...] ixl3: Using MSI-X interrupts with 5 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci11: <dasp, performance counters> at device 18.0 (no driver attached) [...] pci11: <dasp, performance counters> at device 18.1 (no driver attached) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KW256G8 LHF002C> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ixl2: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl2: link state changed to UP [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <INTEL SSDSC2KW256G8 LHF002C> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 244198MB (500118192 512 byte sectors) [...] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] GEOM: ada1: the secondary GPT header is not in the last LBA. [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl3: link state changed to UP [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <CPS LE850G> at usbus0 [...] ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub1 numa-domain 0 on uhub0 [...] uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub1: 4 ports with 3 removable, self powered [...] ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 numa-domain 0 on uhub1 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usbus0 [...] uhub2: MTT enabled [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] ixl0: link state changed to UP [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] ixl1: link state changed to UP [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub3 numa-domain 0 on uhub2 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 4 ports with 4 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ioat0: <SKX IOAT> mem 0x383ffff1c000-0x383ffff1ffff irq 26 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat1: <SKX IOAT> mem 0x383ffff18000-0x383ffff1bfff irq 27 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat2: <SKX IOAT> mem 0x383ffff14000-0x383ffff17fff irq 26 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat3: <SKX IOAT> mem 0x383ffff10000-0x383ffff13fff irq 27 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat4: <SKX IOAT> mem 0x383ffff0c000-0x383ffff0ffff irq 26 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat5: <SKX IOAT> mem 0x383ffff08000-0x383ffff0bfff irq 27 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat6: <SKX IOAT> mem 0x383ffff04000-0x383ffff07fff irq 26 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat7: <SKX IOAT> mem 0x383ffff00000-0x383ffff03fff irq 27 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ums0 numa-domain 0 on uhub1 [...] ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ixl1: promiscuous mode enabled [...] ixl3: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] ixl2: promiscuous mode enabled [...] pid 77128 (clog), jid 0, uid 0: exited on signal 11 (core dumped) [...] arp: packet with unknown hardware format 0x06 received on ixl2 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] [HBSD SEGVGUARD] [/usr/local/sbin/clog (10719)] Suspension expired. [...] -> pid: 10719 ppid: 26573 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on ixl3 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled