[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (2397.35-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66541199360 (63458 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 23 22 18 13 10 12 11 19 16 6 3 14 5 8 15 17 2 20 4 7 9 21 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HP ProLiant> [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] igb0: <Intel(R) I350 (Copper)> port 0x2020-0x203f mem 0x93200000-0x932fffff,0x93304000-0x93307fff at device 0.0 numa-domain 0 on pci8 [...] igb0: EEPROM V1.63-0 Option ROM V1-b3089-p0 eTrack 0x8000106f [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x2000-0x201f mem 0x93100000-0x931fffff,0x93300000-0x93303fff at device 0.1 numa-domain 0 on pci8 [...] igb1: EEPROM V1.63-0 Option ROM V1-b3089-p0 eTrack 0x8000106f [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] ix0: <Intel(R) X540-AT2> mem 0x92c00000-0x92dfffff,0x93000000-0x93003fff at device 0.0 numa-domain 0 on pci9 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x80000528 PHY FW V286 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] ix1: <Intel(R) X540-AT2> mem 0x92e00000-0x92ffffff,0x93004000-0x93007fff at device 0.1 numa-domain 0 on pci9 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x80000528 PHY FW V286 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pcib10: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] pci2: <dasp, performance counters> at device 5.6 (no driver attached) [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg (RAID) AHCI SATA controller> port 0x30a0-0x30a7,0x30bc-0x30bf,0x3098-0x309f,0x30b8-0x30bb,0x3040-0x305f mem 0x93404000-0x934047ff at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93402000-0x934023ff at device 26.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a8c000-0x92a8ffff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci14 [...] vgapci0: Boot video device [...] uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci14 [...] usbus2 numa-domain 0 on uhci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] pci14: <unknown> at device 0.7 (no driver attached) [...] pcib15: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2 [...] pci15: <ACPI PCI bus> numa-domain 0 on pcib15 [...] pcib16: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2 [...] pci16: <ACPI PCI bus> numa-domain 0 on pcib16 [...] pcib17: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2 [...] pci17: <ACPI PCI bus> numa-domain 0 on pcib17 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93401000-0x934013ff at device 29.0 numa-domain 0 on pci2 [...] usbus3: EHCI version 1.0 [...] usbus3 numa-domain 0 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg (RAID) AHCI SATA controller> port 0x3078-0x307f,0x30ac-0x30af,0x3070-0x3077,0x30a8-0x30ab,0x3020-0x303f mem 0x93400000-0x934007ff at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci18: <ACPI PCI bus> numa-domain 1 on pcib18 [...] pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci18 [...] pci19: <ACPI PCI bus> numa-domain 1 on pcib19 [...] pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci18 [...] pci20: <ACPI PCI bus> numa-domain 1 on pcib20 [...] pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci18 [...] pci21: <ACPI PCI bus> numa-domain 1 on pcib21 [...] pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci18 [...] pci22: <ACPI PCI bus> numa-domain 1 on pcib22 [...] pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci18 [...] pci23: <ACPI PCI bus> numa-domain 1 on pcib23 [...] pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci18 [...] pci24: <ACPI PCI bus> numa-domain 1 on pcib24 [...] pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci18 [...] pci25: <ACPI PCI bus> numa-domain 1 on pcib25 [...] pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci18 [...] pci26: <ACPI PCI bus> numa-domain 1 on pcib26 [...] pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci18 [...] pci27: <ACPI PCI bus> numa-domain 1 on pcib27 [...] pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci18 [...] pci28: <ACPI PCI bus> numa-domain 1 on pcib28 [...] pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci18 [...] pci29: <ACPI PCI bus> numa-domain 1 on pcib29 [...] pci18: <dasp, performance counters> at device 5.6 (no driver attached) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 17e200000c00 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 180900000c00 [...] device_attach: est23 attach returned 6 [...] Timecounter "TSC-low" frequency 1198611482 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <HP UHCI root HUB> at usbus2 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ada0 at ahcich4 bus 0 scbus5 target 0 lun 0 [...] ada0: <TOSHIBA MD04ACA400 FP2A> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 3815447MB (7814037168 512 byte sectors) [...] ses1: pass1,ada0 in 'Slot 00', SATA Slot: scbus5 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 numa-domain 0 on usbus2 [...] uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub2 numa-domain 0 on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3 numa-domain 0 on usbus0 [...] uhub3: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 21 ports with 21 removable, self powered [...] ugen2.2: <BMC Virtual Keyboard> at usbus2 [...] ukbd0 numa-domain 0 on uhub0 [...] ukbd0: <Virtual Keyboard > on usbus2 [...] kbd2 at ukbd0 [...] ugen0.2: <vendor 0x0424 product 0x2660> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub5 numa-domain 0 on uhub1 [...] uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8002> at usbus3 [...] uhub6 numa-domain 0 on uhub2 [...] uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 2 ports with 1 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered