[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (3591.49-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16546885632 (15780 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 3 7 4 6 5 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf9c00-0xf9c1e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0xd020-0xd03f mem 0xef420000-0xef43ffff,0xef000000-0xef3fffff,0xef4c4000-0xef4c7fff irq 26 at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0xd000-0xd01f mem 0xef400000-0xef41ffff,0xee800000-0xeebfffff,0xef4c0000-0xef4c3fff irq 28 at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xee080000-0xee083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc020-0xc03f mem 0xe2a80000-0xe2afffff,0xe2b04000-0xe2b07fff irq 40 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x8000014d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc000-0xc01f mem 0xe2a00000-0xe2a7ffff,0xe2b00000-0xe2b03fff irq 44 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x8000014d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xe000-0xe0ff mem 0xe2800000-0xe2803fff,0xe2400000-0xe27fffff irq 16 at device 0.0 on pci4 [...] em0: <Intel(R) 82579LM> port 0xf040-0xf05f mem 0xef800000-0xef81ffff,0xef82d000-0xef82dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xef82f000-0xef82f3ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xef820000-0xef823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xef7c0000-0xef7dffff,0xef700000-0xef77ffff,0xef7e0000-0xef7e3fff irq 16 at device 0.0 on pci6 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xef600000-0xef60ffff,0xef610000-0xef611fff irq 19 at device 0.0 on pci8 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xef82e000-0xef82e3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <serial bus, FireWire> at device 5.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Patsburg+ (RAID) AHCI SATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf020-0xf03f mem 0xef82c000-0xef82c7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib10: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci10: <ACPI PCI bus> on pcib10 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1795672740 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC262 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa1 [...] pcm3: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <(0x104c) XHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <(0x104c) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus2 [...] uhub3: 8 ports with 8 removable, self powered [...] ugen2.3: <PixArt Microsoft USB Optical Mouse> at usbus2 [...] ugen2.4: <LITEON Technology USB Keyboard> at usbus2 [...] Root mount waiting for: CAM usbus0 usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <EP1 Interrupt> on usbus2 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic Flash Disk (0x1e3d:0x2096) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic Flash Disk (0x1e3d:0x2096) [...] ugen0.3: <Generic Flash Disk> at usbus0 [...] umass0 on uhub4 [...] umass0: <Generic Flash Disk, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4100 [...] umass0:4:0: Attached to scbus4 [...] ugen0.4: <Realtek USB3.0 Card Reader> at usbus0 [...] umass1 on uhub4 [...] umass1: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4000 [...] umass1:5:1: Attached to scbus5 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic Flash Disk 5.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7800MB (15974400 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <hp CDDVDW SH-216DB HH10> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] da1 at umass-sim1 bus 1 scbus5 target 0 lun 0 [...] da1: <Generic- USB3.0 CRW-CF/MD 1.00> Removable Direct Access SPC-2 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim1 bus 1 scbus5 target 0 lun 1 [...] da2: <Generic- USB3.0 CRW-SD 1.00> Removable Direct Access SPC-2 SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim1 bus 1 scbus5 target 0 lun 2 [...] da3: <Generic- USB3.0 CRW-MS/HG 1.00> Removable Direct Access SPC-2 SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] ichsmb0: <Intel Patsburg SMBus controller> port 0xf000-0xf01f mem 0xef82b000-0xef82b0ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub3 [...] ums0: <PixArt Microsoft USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.3: <Generic Flash Disk> at usbus0 (disconnected) [...] umass0: at uhub4, port 3, addr 3 (disconnected) [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic Flash Disk 5.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (3591.55-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16551387136 (15784 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 3 7 5 2 4 6 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbaebb98-0xcbaebbb6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0xd020-0xd03f mem 0xef420000-0xef43ffff,0xef000000-0xef3fffff,0xef4c4000-0xef4c7fff irq 26 at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0xd000-0xd01f mem 0xef400000-0xef41ffff,0xee800000-0xeebfffff,0xef4c0000-0xef4c3fff irq 28 at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xee080000-0xee083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc020-0xc03f mem 0xe2a80000-0xe2afffff,0xe2b04000-0xe2b07fff irq 40 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x8000014d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc000-0xc01f mem 0xe2a00000-0xe2a7ffff,0xe2b00000-0xe2b03fff irq 44 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x8000014d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xe000-0xe0ff mem 0xe2800000-0xe2803fff,0xe2400000-0xe27fffff irq 16 at device 0.0 on pci4 [...] em0: <Intel(R) 82579LM> port 0xf040-0xf05f mem 0xef800000-0xef81ffff,0xef82d000-0xef82dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xef82f000-0xef82f3ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xef820000-0xef823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xef7c0000-0xef7dffff,0xef700000-0xef77ffff,0xef7e0000-0xef7e3fff irq 16 at device 0.0 on pci6 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xef600000-0xef60ffff,0xef610000-0xef611fff irq 19 at device 0.0 on pci8 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xef82e000-0xef82e3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <serial bus, FireWire> at device 5.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Patsburg+ (RAID) AHCI SATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf020-0xf03f mem 0xef82c000-0xef82c7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib10: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci10: <ACPI PCI bus> on pcib10 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1795672842 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC262 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa1 [...] pcm3: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen1.1: <(0x104c) XHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <(0x104c) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <hp CDDVDW SH-216DB HH10> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Realtek USB3.0 Card Reader> at usbus0 [...] umass0 on uhub4 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:4:0: Attached to scbus4 [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic- USB3.0 CRW-CF/MD 1.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen2.3: <PixArt Microsoft USB Optical Mouse> at usbus2 [...] da1 at umass-sim0 bus 0 scbus4 target 0 lun 1 [...] da1: <Generic- USB3.0 CRW-SD 1.00> Removable Direct Access SPC-2 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus4 target 0 lun 2 [...] da2: <Generic- USB3.0 CRW-MS/HG 1.00> Removable Direct Access SPC-2 SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] ugen2.4: <LITEON Technology USB Keyboard> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <EP1 Interrupt> on usbus2 [...] kbd2 at ukbd0 [...] ichsmb0: <Intel Patsburg SMBus controller> port 0xf000-0xf01f mem 0xef82b000-0xef82b0ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub3 [...] ums0: <PixArt Microsoft USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 51 51 fsync: giving up on dirty (error = 35) 0xfffff800032e0d58: type VCHR [...] usecount 1, writecount 0, refcount 854 seqc users 0 rdev 0xfffff800019a8000 [...] hold count flags () [...] flags () [...] v_object 0xfffff800032d0e70 ref 0 pages 11531 cleanbuf 851 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe00dcc8de40 (pid 17, syncer, tid 100145) [...] 43 2 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p3 stable/23.7-n254799-01e2d59d337 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (3591.48-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16551387136 (15784 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 2 7 5 6 4 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbaebb98-0xcbaebbb6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 82576> port 0xd020-0xd03f mem 0xef420000-0xef43ffff,0xef000000-0xef3fffff,0xef4c4000-0xef4c7fff irq 26 at device 0.0 on pci1 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0xd000-0xd01f mem 0xef400000-0xef41ffff,0xee800000-0xeebfffff,0xef4c0000-0xef4c3fff irq 28 at device 0.1 on pci1 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 32 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xee080000-0xee083fff irq 36 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc020-0xc03f mem 0xe2a80000-0xe2afffff,0xe2b04000-0xe2b07fff irq 40 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x8000014d PHY FW V65535 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc000-0xc01f mem 0xe2a00000-0xe2a7ffff,0xe2b00000-0xe2b03fff irq 44 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x8000014d PHY FW V65535 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xe000-0xe0ff mem 0xe2800000-0xe2803fff,0xe2400000-0xe27fffff irq 16 at device 0.0 on pci4 [...] em0: <Intel(R) 82579LM> port 0xf040-0xf05f mem 0xef800000-0xef81ffff,0xef82d000-0xef82dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xef82f000-0xef82f3ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Patsburg HDA Controller> mem 0xef820000-0xef823fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xef7c0000-0xef7dffff,0xef700000-0xef77ffff,0xef7e0000-0xef7e3fff irq 16 at device 0.0 on pci6 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xef600000-0xef60ffff,0xef610000-0xef611fff irq 19 at device 0.0 on pci8 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xef82e000-0xef82e3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <serial bus, FireWire> at device 5.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Patsburg+ (RAID) AHCI SATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf020-0xf03f mem 0xef82c000-0xef82c7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib10: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci10: <ACPI PCI bus> on pcib10 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1795672513 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC262 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa1 [...] pcm3: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen1.1: <(0x104c) XHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <(0x104c) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <hp CDDVDW SH-216DB HH10> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 8 ports with 8 removable, self powered