[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33266765824 (31725 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1696108567 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf790c000-0xf790ffff irq 16 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7908000-0xf790bfff irq 19 at device 0.1 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7780000-0xf77fffff,0xf7904000-0xf7907fff irq 18 at device 0.2 on pci2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7700000-0xf777ffff,0xf7900000-0xf7903fff irq 17 at device 0.3 on pci2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f34000-0xf7f37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7f00000-0xf7f1ffff,0xf7f3d000-0xf7f3dfff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f3c000-0xf7f3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff irq 18 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7500000-0xf75fffff,0xf7600000-0xf7603fff irq 19 at device 0.0 on pci5 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7d10000-0xf7d107ff irq 16 at device 0.0 on pci6 [...] ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pci8: <serial bus, FireWire> at device 1.0 (no driver attached) [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f3b000-0xf7f3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7f3a000-0xf7f3a7ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xd1800-0xd27ff,0xd2800-0xd37ff,0xd3800-0xd47ff,0xd4800-0xd57ff,0xd5800-0xd67ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC899 (Onboard Digital)> at nid 17 and 31 on hdaa1 [...] pcm4: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] ugen0.2: <vendor 0x045b product 0x0209> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub5 on uhub0 [...] uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <SanDisk Cruzer Glide> at usbus0 [...] umass0 on uhub3 [...] umass0: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:8:0: Attached to scbus8 [...] ugen0.4: <SanDisk Sandisk Ultra> at usbus0 [...] umass1 on uhub3 [...] umass1: <SanDisk Sandisk Ultra, class 0/0, rev 2.10/1.00, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4001 [...] umass1:9:1: Attached to scbus9 [...] ugen0.5: <vendor 0x045b product 0x0209> at usbus0 [...] uhub6 on uhub2 [...] uhub6: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 4> on usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] ugen0.6: <American Power Conversion Back-UPS RS 1300G FW:863.L5 .D USB FW:L5> at usbus0 [...] ugen0.7: <vendor 0x045b product 0x0210> at usbus0 [...] uhub7 on uhub2 [...] uhub7: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 6> on usbus0 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen0.8: <vendor 0x045b product 0x0210> at usbus0 [...] uhub8 on uhub2 [...] uhub8: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 7> on usbus0 [...] uhub8: 4 ports with 4 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB120G4 D2010355> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] pass1 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] pass1: <Marvell Console 1.01> Removable Processor SCSI device [...] pass1: Serial Number... [...] da1 at umass-sim1 bus 1 scbus9 target 0 lun 0 [...] da1: <SanDisk Sandisk Ultra PMAP> Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 30176MB (61800448 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] pass1: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <SanDisk Cruzer Glide 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29952MB (61341696 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] GEOM: da1: the secondary GPT table is corrupt or invalid. [...] GEOM: da1: using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to UP [...] igb4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] in6_purgeaddr: err=65, destination address delete failed [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] pflog0: promiscuous mode disabled [...] ugen0.4: <SanDisk Sandisk Ultra> at usbus0 (disconnected) [...] umass1: at uhub3, port 3, addr 3 (disconnected) [...] da1 at umass-sim1 bus 1 scbus9 target 0 lun 0 [...] da1: <SanDisk Sandisk Ultra PMAP> s/n ... detached [...] (da1:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ugen0.3: <SanDisk Cruzer Glide> at usbus0 (disconnected) [...] umass0: at uhub3, port 1, addr 2 (disconnected) [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <SanDisk Cruzer Glide 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (3392.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33266761728 (31725 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1696105232 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf790c000-0xf790ffff irq 16 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7908000-0xf790bfff irq 19 at device 0.1 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7780000-0xf77fffff,0xf7904000-0xf7907fff irq 18 at device 0.2 on pci2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7700000-0xf777ffff,0xf7900000-0xf7903fff irq 17 at device 0.3 on pci2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f34000-0xf7f37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7f00000-0xf7f1ffff,0xf7f3d000-0xf7f3dfff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f3c000-0xf7f3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff irq 18 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7500000-0xf75fffff,0xf7600000-0xf7603fff irq 19 at device 0.0 on pci5 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7d10000-0xf7d107ff irq 16 at device 0.0 on pci6 [...] ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pci8: <serial bus, FireWire> at device 1.0 (no driver attached) [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f3b000-0xf7f3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7f3a000-0xf7f3a7ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xd1800-0xd27ff,0xd2800-0xd37ff,0xd3800-0xd47ff,0xd4800-0xd57ff,0xd5800-0xd67ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC899 (Onboard Digital)> at nid 17 and 31 on hdaa1 [...] pcm4: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB120G4 D2010355> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] pass1 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] pass1: <Marvell Console 1.01> Removable Processor SCSI device [...] pass1: Serial Number... [...] pass1: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen0.2: <vendor 0x045b product 0x0209> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x045b product 0x0209> at usbus0 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 2> on usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] ugen0.4: <American Power Conversion Back-UPS RS 1300G FW:863.L5 .D USB FW:L5> at usbus0 [...] ugen0.5: <vendor 0x045b product 0x0210> at usbus0 [...] uhub7 on uhub0 [...] uhub7: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 4> on usbus0 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen0.6: <vendor 0x045b product 0x0210> at usbus0 [...] uhub8 on uhub0 [...] uhub8: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 5> on usbus0 [...] uhub8: 4 ports with 4 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to UP [...] igb4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] igb4: link state changed to DOWN [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to UP [...] igb4: link state changed to UP [...] em1: link state changed to DOWN [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb4: link state changed to DOWN [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb4: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pid 13942 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 98877 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 15445 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 45095 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 46867 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (46867)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 46867 ppid: 13791 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (13791)] Preventing execution due to repeated segfaults. [...] -> pid: 13791 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] wg0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 6 0 0 0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif em1, outif em0 [...] done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p18-HBSD #1 815defa6fd0(stable/21.1)-dirty: Mon Jun 14 09:17:18 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (3392.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33266761728 (31725 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 2 1 [...] Timecounter "TSC-low" frequency 1696107412 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf790c000-0xf790ffff irq 16 at device 0.0 on pci2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7908000-0xf790bfff irq 19 at device 0.1 on pci2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7780000-0xf77fffff,0xf7904000-0xf7907fff irq 18 at device 0.2 on pci2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7700000-0xf777ffff,0xf7900000-0xf7903fff irq 17 at device 0.3 on pci2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f34000-0xf7f37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7f00000-0xf7f1ffff,0xf7f3d000-0xf7f3dfff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f3c000-0xf7f3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xf7ec0000-0xf7edffff,0xf7e00000-0xf7e7ffff,0xf7ee0000-0xf7ee3fff irq 18 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7500000-0xf75fffff,0xf7600000-0xf7603fff irq 19 at device 0.0 on pci5 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7d10000-0xf7d107ff irq 16 at device 0.0 on pci6 [...] ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pci8: <serial bus, FireWire> at device 1.0 (no driver attached) [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f3b000-0xf7f3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7f3a000-0xf7f3a7ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC899 (Onboard Digital)> at nid 17 and 31 on hdaa1 [...] pcm4: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB120G4 D2010355> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] pass1 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] pass1: <Marvell Console 1.01> Removable Processor SCSI device [...] pass1: Serial Number... [...] pass1: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen0.2: <vendor 0x045b product 0x0209> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x045b product 0x0209> at usbus0 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 2> on usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] ugen0.4: <American Power Conversion Back-UPS RS 1300G FW:863.L5 .D USB FW:L5> at usbus0 [...] ugen0.5: <vendor 0x045b product 0x0210> at usbus0 [...] uhub7 on uhub0 [...] uhub7: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 4> on usbus0 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen0.6: <vendor 0x045b product 0x0210> at usbus0 [...] uhub8 on uhub0 [...] uhub8: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 5> on usbus0 [...] uhub8: 4 ports with 4 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to UP [...] igb4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em1: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb4: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] igb1: link state changed to UP [...] em0: link state changed to UP [...] igb4: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] em1: permanently promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] em1: link state changed to DOWN [...] igb1: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] em0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] 207.370143 [1130] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 207.370155 [1035] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] wg0: permanently promiscuous mode enabled [...] 207.371248 [1130] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 207.371299 [ 320] generic_netmap_register Emulated adapter for wg0 activated [...] igb4: permanently promiscuous mode enabled [...] igb1: link state changed to UP [...] igb4: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] igb4: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 58, rcvif em1, outif em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] igb4: link state changed to DOWN [...] 752.727299 [ 295] generic_netmap_unregister Emulated adapter for wg0 deactivated [...] 752.727331 [1035] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] igb4: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em1: link state changed to UP [...] igb4: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb4: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled