[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Atom(TM) CPU E3827 @ 1.74GHz (1750.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3991302144 (3806 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 40000000 vs 40000001 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0b02000-0xd0b027ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xd0700000-0xd0703fff irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] igb3: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 16 at device 0.0 on pci6 [...] igb3: NVM V0.6 imgtype2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 17 at device 2.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0b01000-0xd0b013ff irq 23 at device 29.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 800000001540 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 800000001540 [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC" frequency 1749999725 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HTE725032A7E630 GHBOA510> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Dual Console: Serial Primary, Video Secondary [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xe000-0xe01f mem 0xd0b00000-0xd0b0001f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'vlan0.1000' [...] vlan1: changing name to 'vlan0.101' [...] vlan2: changing name to 'vlan0.102' [...] vlan3: changing name to 'vlan0.103' [...] vlan4: changing name to 'vlan0.104' [...] vlan5: changing name to 'vlan0.105' [...] vlan6: changing name to 'vlan0.106' [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] vlan0.1000: promiscuous mode enabled [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb0: link state changed to DOWN [...] bridge0: mac address XXX vlan 0 moved from igb0 to vlan0.1000 [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] bridge0: mac address XXX vlan 0 moved from vlan0.1000 to igb0 [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to UP [...] lagg0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.103: link state changed to UP [...] vlan0.101: link state changed to UP [...] vlan0.1000: link state changed to UP [...] vlan0.106: link state changed to UP [...] vlan0.104: link state changed to UP [...] vlan0.105: link state changed to UP [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.103: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] vlan0.1000: link state changed to DOWN [...] vlan0.106: link state changed to DOWN [...] vlan0.104: link state changed to DOWN [...] vlan0.105: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] pid 85327 (sh), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6d5h38m33s [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Atom(TM) CPU E3827 @ 1.74GHz (1750.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3991298048 (3806 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 40000000 vs 40000001 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0b02000-0xd0b027ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xd0700000-0xd0703fff irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] igb3: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 16 at device 0.0 on pci6 [...] igb3: NVM V0.6 imgtype2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <PCI-PCI bridge> irq 17 at device 2.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0b01000-0xd0b013ff irq 23 at device 29.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 800000001540 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 800000001540 [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC" frequency 1749999851 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HTE725032A7E630 GHBOA510> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Dual Console: Serial Primary, Video Secondary