[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: AMD Phenom(tm) II X6 1035T Processor (2609.96-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16360398848 (15602 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL FX09 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 3 4 2 5 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfbbc0-0xfbbde [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <DELL FX09 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfe8f0000-0xfe8fffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS880 HDA Controller> mem 0xfe8e8000-0xfe8ebfff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xfeaf0000-0xfeafffff irq 18 at device 0.0 on pci2 [...] bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM57780 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <multimedia> at device 0.0 (no driver attached) [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fb000-0xfe7fbfff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe7f4000-0xfe7f7fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1296749965 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub0 on usbus1 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus3 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub2 on usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub4 on usbus2 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus5 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub6 on usbus6 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 3 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub6: 2 ports with 2 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: CAM usbus2 usbus5 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WDS500G2B0A-00SM50 415020WD> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1907729MB (3907029168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <INTEL SSDSC2BW480A4 DC32> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 457862MB (937703088 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada3: <WDC WD2002FAEX-007BA0 05.01D05> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 1907729MB (3907029168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GH50N B103> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen3.2: <Broadcom Corp BCM20702A0> at usbus3 [...] ugen1.2: <CPS CP1500PFCLCD> at usbus1 [...] Root mount waiting for: usbus5 [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic Mass Storage Device (0x18e3:0x9106) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic Mass Storage Device (0x18e3:0x9106) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic Mass Storage Device (0x18e3:0x9106) [...] ugen5.2: <Generic Mass Storage Device> at usbus5 [...] umass0 on uhub5 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0xc001 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus7 target 0 lun 1 [...] da1: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus7 target 0 lun 2 [...] da2: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus7 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] device_attach: drmn0 attach returned 19 [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1028:0x0458 0x00). [...] [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: Kamino_HDMI [...] drmn0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [...] drmn0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [...] [drm] Detected VRAM RAM=256M, BAR=256M [...] [drm] RAM width 32bits DDR [...] [drm] radeon: 256M of VRAM memory ready [...] [drm] radeon: 512M of GTT memory ready. [...] [drm] Loading RS780 Microcode [...] RS780_pfp.bin: could not load binary firmware /boot/firmware/RS780_pfp.bin either [...] radeon/RS780_pfp.bin: could not load binary firmware /boot/firmware/radeon/RS780_pfp.bin either [...] radeon_RS780_pfp.bin: could not load binary firmware /boot/firmware/radeon_RS780_pfp.bin either [...] drmn0: successfully loaded firmware image 'radeon/RS780_pfp.bin' [...] RS780_me.bin: could not load binary firmware /boot/firmware/RS780_me.bin either [...] radeon/RS780_me.bin: could not load binary firmware /boot/firmware/radeon/RS780_me.bin either [...] radeon_RS780_me.bin: could not load binary firmware /boot/firmware/radeon_RS780_me.bin either [...] drmn0: successfully loaded firmware image 'radeon/RS780_me.bin' [...] R600_rlc.bin: could not load binary firmware /boot/firmware/R600_rlc.bin either [...] radeon/R600_rlc.bin: could not load binary firmware /boot/firmware/radeon/R600_rlc.bin either [...] radeon_R600_rlc.bin: could not load binary firmware /boot/firmware/radeon_R600_rlc.bin either [...] drmn0: successfully loaded firmware image 'radeon/R600_rlc.bin' [...] [drm] radeon: power management initialized [...] RS780_uvd.bin: could not load binary firmware /boot/firmware/RS780_uvd.bin either [...] radeon/RS780_uvd.bin: could not load binary firmware /boot/firmware/radeon/RS780_uvd.bin either [...] radeon_RS780_uvd.bin: could not load binary firmware /boot/firmware/radeon_RS780_uvd.bin either [...] drmn0: successfully loaded firmware image 'radeon/RS780_uvd.bin' [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 [...] drmn0: fence driver on ring 5 use gpu addr 0x00000000c0056038 [...] drmn0: radeon: MSI limited to 32-bit [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] lkpi_iicbb0: <LinuxKPI I2CBB> on drmn0 [...] iicbb0: <I2C bit-banging driver> on lkpi_iicbb0 [...] iicbus0: <Philips I2C bus> on iicbb0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iicbb1: <LinuxKPI I2CBB> on drmn0 [...] iicbb1: <I2C bit-banging driver> on lkpi_iicbb1 [...] iicbus1: <Philips I2C bus> on iicbb1 addr 0xff [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iicbb2: <LinuxKPI I2CBB> on drmn0 [...] iicbb2: <I2C bit-banging driver> on lkpi_iicbb2 [...] iicbus2: <Philips I2C bus> on iicbb2 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iicbb3: <LinuxKPI I2CBB> on drmn0 [...] iicbb3: <I2C bit-banging driver> on lkpi_iicbb3 [...] iicbus3: <Philips I2C bus> on iicbb3 addr 0xff [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iicbb4: <LinuxKPI I2CBB> on drmn0 [...] iicbb4: <I2C bit-banging driver> on lkpi_iicbb4 [...] iicbus4: <Philips I2C bus> on iicbb4 addr 0xff [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] VGA-1 [...] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD3 [...] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [...] [drm] fb mappable at 0xD0247000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Driver priority 0 too low. Current 100 [...] fbd0: not attached to vt(4) console; another device has precedence (err=17) [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] CPU: AMD Phenom(tm) II X6 1035T Processor (2593.50-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant, performance statistics [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] ums1 on uhub2 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 [...] ums1: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub2 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 [...] ubt0 on uhub1 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 2> on usbus3 [...] bge0: link state changed to UP