[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): text 80x25 [...] CPU: AMD Phenom(tm) 9150e Quad-Core Processor (1799.36-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f23 Family=0x10 Model=0x2 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS> [...] SVM: NP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8272080896 (7888 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ACRSYS A c e r > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20200430/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC" frequency 1799358406 Hz quality 800 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ACRSYS ACRPRDCT> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xc800-0xc87f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fb9) HDA Controller> mem 0xfe97c000-0xfe97ffff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xfebff800-0xfebfffff,0xfebff400-0xfebff47f,0xfebff000-0xfebff07f,0xfebfec00-0xfebfec7f irq 18 at device 0.0 on pci3 [...] fwohci0: OHCI version 1.10 (ROM=0) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 2 ports. [...] fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100 [...] fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100 [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100 [...] fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfcfff800-0xfcfffbff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffe000-0xfcffefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffd000-0xfcffdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff000-0xfcfff0ff irq 17 at device 18.2 on pci0 [...] ehci0: AMD SB600/700 quirk applied [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffc000-0xfcffcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcff7000-0xfcff7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcff6800-0xfcff68ff irq 19 at device 19.2 on pci0 [...] ehci1: AMD SB600/700 quirk applied [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfcff0000-0xfcff3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] puc0: <Timedia technology 2 Port Serial> port 0xe800-0xe81f,0xe400-0xe407,0xe000-0xe007 irq 21 at device 6.0 on pci4 [...] uart2: <16550 or compatible> at port 1 on puc0 [...] uart3: <Non-standard ns8250 class UART with FIFOs> at port 2 on puc0 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcff5000-0xfcff5fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] amdtemp0: Erratum 319: temperature measurement may be inaccurate [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] hdacc1: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC1200 (Analog 10ch/2.0)> at nid 20,22,21,23,27 and 24,25,28 on hdaa1 [...] pcm4: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa1 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub1: ugen5.1: <ATI EHCI root HUB> at usbus5 [...] <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] (aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe2:ahcich2:0:15:0): CAM status: Command timeout [...] (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/ufsid/XXXXXXXXXXXXXXXX [rw]... [...] (aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe2:ahcich2:0:15:0): CAM status: Command timeout [...] (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted [...] (aprobe1:ahcich1:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe1:ahcich1:0:15:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted [...] (aprobe1:ahcich1:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe1:ahcich1:0:15:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted [...] (aprobe3:ahcich3:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe3:ahcich3:0:15:0): CAM status: Command timeout [...] (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted [...] (aprobe3:ahcich3:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe3:ahcich3:0:15:0): CAM status: Command timeout [...] (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ST500DM002-1BD142 KC48> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <ST500DM002-1BD142 KC48> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ata0 bus 0 scbus4 target 0 lun 0 [...] ada2: <ST3500312CS SC13> ATA8-ACS SATA 1.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes) [...] ada2: 476940MB (976773168 512 byte sectors) [...] ada3 at ata0 bus 0 scbus4 target 1 lun 0 [...] ada3: <WDC WD3200AAJS-22B4A0 01.03A01> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes) [...] ada3: 305245MB (625142448 512 byte sectors) [...] ada4 at ata1 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST3160215ACE 3.ACF> ATA-7 device [...] ada4: Serial Number... [...] ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes) [...] ada4: 152627MB (312581808 512 byte sectors) [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW SH-224DB SB01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub4: 2 ports with 2 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub5: 3 ports with 3 removable, self powered [...] GEOM_LINUX_LVM: disk pv2 already initialised in Ripley [...] GEOM_LINUX_LVM: disk pv2 already initialised in Ripley [...] GEOM_LINUX_LVM: disk pv0 already initialised in Ripley [...] uhub2: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] GEOM_LINUX_LVM: disk pv1 already initialised in Ripley [...] ugen5.2: <vendor 0x1a40 USB 2.0 Hub> at usbus5 [...] uhub7 on uhub2 [...] uhub7: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus5 [...] ugen2.2: <Generic USB2.0-CRW> at usbus2 [...] umass0 on uhub6 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus6 target 0 lun 1 [...] da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus6 target 0 lun 2 [...] da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus6 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] uhub7: 4 ports with 4 removable, self powered [...] ugen0.2: <HID Global OMNIKEY 3x21 Smart Card Reader> at usbus0 [...] ugen4.2: <Logitech USB Receiver> at usbus4 [...] ukbd0 on uhub3 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus4 [...] kbd2 at ukbd0 [...] ugen1.2: <Bluetooth v2.0 Bluetooth V2.0 Dongle> at usbus1 [...] GEOM_LINUX_LVM: disk pv2 already initialised in Ripley [...] GEOM_LINUX_LVM: disk pv0 already initialised in Ripley [...] GEOM_LINUX_LVM: disk pv1 already initialised in Ripley [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] ums0 on uhub3 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus4 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub3 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus4 [...] msk0: link state changed to UP [...] ubt0 on uhub1 [...] ubt0: <Bluetooth v2.0 Bluetooth V2.0 Dongle, class 224/1, rev 2.00/1.00, addr 2> on usbus1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 1474 (bsdisks), jid 0, uid 0: exited on signal 6 (core dumped)