[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.81-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16512704512 (15747 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1596405580 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe020-0xe03f mem 0xf7da0000-0xf7dbffff,0xf7d80000-0xf7d9ffff irq 19 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em2: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe000-0xe01f mem 0xf7d40000-0xf7d5ffff,0xf7d20000-0xf7d3ffff irq 18 at device 0.1 on pci4 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] em3: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd020-0xd03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci5 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em4: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd000-0xd01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 16 at device 0.1 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xda7ff,0xda800-0xdb7ff,0xdb800-0xdc7ff,0xdc800-0xdd7ff,0xdd800-0xde7ff,0xde800-0xdf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST250DM000-1BD141 KC45> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GHA2N A103> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em4: link state changed to DOWN [...] em0: link state changed to DOWN [...] em4: link state changed to UP [...] em0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] 048.348823 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: permanently promiscuous mode enabled [...] 048.457547 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] 051.565298 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] ugen1.3: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 3> on usbus1 [...] uhub5: 3 ports with 2 removable, bus powered [...] ugen1.4: <Mitsumi Electric Apple Extended USB Keyboard> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] uhid0 on uhub5 [...] uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10, addr 4> on usbus1 [...] em0: link state changed to DOWN [...] ugen1.3: <Mitsumi Electric Hub in Apple Extended USB Keyboard> at usbus1 (disconnected) [...] uhub5: at uhub3, port 4, addr 3 (disconnected) [...] ugen1.4: <Mitsumi Electric Apple Extended USB Keyboard> at usbus1 (disconnected) [...] ukbd0: at uhub5, port 3, addr 4 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub5, port 3, addr 4 (disconnected) [...] uhid0: detached [...] uhub5: detached [...] em0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 5 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1d8h59m54s [...] uhub4: detached [...] uhub3: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.81-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16512704512 (15747 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1596405452 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe020-0xe03f mem 0xf7da0000-0xf7dbffff,0xf7d80000-0xf7d9ffff irq 19 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em2: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe000-0xe01f mem 0xf7d40000-0xf7d5ffff,0xf7d20000-0xf7d3ffff irq 18 at device 0.1 on pci4 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] em3: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd020-0xd03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci5 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em4: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd000-0xd01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 16 at device 0.1 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xda7ff,0xda800-0xdb7ff,0xdb800-0xdc7ff,0xdc800-0xdd7ff,0xdd800-0xde7ff,0xde800-0xdf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST250DM000-1BD141 KC45> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GHA2N A103> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 8 ports with 8 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em4: link state changed to DOWN [...] em0: link state changed to DOWN [...] em4: link state changed to UP [...] em0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] 927.617594 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: permanently promiscuous mode enabled [...] 927.723113 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] 930.758381 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] arprequest: cannot find matching address [...] arprequest: cannot find matching address [...] arprequest: cannot find matching address [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 2 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 18m51s [...] uhub3: detached [...] uhub4: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.81-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16512704512 (15747 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1596406364 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe020-0xe03f mem 0xf7da0000-0xf7dbffff,0xf7d80000-0xf7d9ffff irq 19 at device 0.0 on pci4 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em2: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe000-0xe01f mem 0xf7d40000-0xf7d5ffff,0xf7d20000-0xf7d3ffff irq 18 at device 0.1 on pci4 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] em3: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd020-0xd03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci5 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em4: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd000-0xd01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 16 at device 0.1 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xda7ff,0xda800-0xdb7ff,0xdb800-0xdc7ff,0xdc800-0xdd7ff,0xdd800-0xde7ff,0xde800-0xdf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST250DM000-1BD141 KC45> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GHA2N A103> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 8 ports with 8 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em4: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em4: link state changed to DOWN [...] em0: link state changed to DOWN [...] em4: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to UP [...] 014.668585 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: permanently promiscuous mode enabled [...] 014.772517 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] 018.096155 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to UP