[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (3092.92-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x21<LAHF,ABM> [...] [1] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] [1] XSAVE Features=0x1<XSAVEOPT> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16578768896 (15810 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <GBTSYS GBTPRDCT> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 3 2 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] vtvga0: <VT VGA driver> [...] [1] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <GBTSYS GBTPRDCT> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] apei0: <ACPI Platform Error Interface> on acpi0 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <encrypt/decrypt, network/computer crypto> at device 0.0 (no driver attached) [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe020-0xe03f mem 0xf7e20000-0xf7e3ffff,0xf7e44000-0xf7e47fff irq 17 at device 0.0 on pci2 [...] [1] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix0: Using 4 RX queues 4 TX queues [...] [1] ix0: Using MSI-X interrupts with 5 vectors [...] [1] ix0: allocated for 4 queues [...] [1] ix0: allocated for 4 rx queues [...] [1] ix0: Ethernet address: ... [...] [1] ix0: PCI Express Bus: Speed 5.0GT/s Width x4 [...] [1] ix0: eTrack 0x800003de [...] [1] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] [1] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe000-0xe01f mem 0xf7e00000-0xf7e1ffff,0xf7e40000-0xf7e43fff irq 18 at device 0.1 on pci2 [...] [1] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix1: Using 4 RX queues 4 TX queues [...] [1] ix1: Using MSI-X interrupts with 5 vectors [...] [1] ix1: allocated for 4 queues [...] [1] ix1: allocated for 4 rx queues [...] [1] ix1: Ethernet address: ... [...] [1] ix1: PCI Express Bus: Speed 5.0GT/s Width x4 [...] [1] ix1: eTrack 0x800003de [...] [1] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 1.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xd020-0xd03f mem 0xf7d20000-0xf7d3ffff,0xf7d44000-0xf7d47fff irq 18 at device 0.0 on pci3 [...] [1] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix2: Using 4 RX queues 4 TX queues [...] [1] ix2: Using MSI-X interrupts with 5 vectors [...] [1] ix2: allocated for 4 queues [...] [1] ix2: allocated for 4 rx queues [...] [1] ix2: Ethernet address: ... [...] [1] ix2: PCI Express Bus: Speed 5.0GT/s Width x4 [...] [1] ix2: eTrack 0x800004e1 [...] [1] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] [1] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xd000-0xd01f mem 0xf7d00000-0xf7d1ffff,0xf7d40000-0xf7d43fff irq 19 at device 0.1 on pci3 [...] [1] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix3: Using 4 RX queues 4 TX queues [...] [1] ix3: Using MSI-X interrupts with 5 vectors [...] [1] ix3: allocated for 4 queues [...] [1] ix3: allocated for 4 rx queues [...] [1] ix3: Ethernet address: ... [...] [1] ix3: PCI Express Bus: Speed 5.0GT/s Width x4 [...] [1] ix3: eTrack 0x800004e1 [...] [1] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] [1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f03000-0xf7f033ff irq 16 at device 26.0 on pci0 [...] [1] usbus0: EHCI version 1.0 [...] [1] usbus0 on ehci0 [...] [1] usbus0: 480Mbps High Speed USB v2.0 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igb0: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7c00000-0xf7c7ffff,0xf7c80000-0xf7c83fff irq 16 at device 0.0 on pci4 [...] [1] igb0: EEPROM V3.16-0 eTrack 0x800004d9 [...] [1] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb0: Using 4 RX queues 4 TX queues [...] [1] igb0: Using MSI-X interrupts with 5 vectors [...] [1] igb0: Ethernet address: ... [...] [1] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] igb1: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7b00000-0xf7b7ffff,0xf7b80000-0xf7b83fff irq 17 at device 0.0 on pci5 [...] [1] igb1: EEPROM V3.16-0 eTrack 0x800004d9 [...] [1] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb1: Using 4 RX queues 4 TX queues [...] [1] igb1: Using MSI-X interrupts with 5 vectors [...] [1] igb1: Ethernet address: ... [...] [1] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] igb2: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7a00000-0xf7a7ffff,0xf7a80000-0xf7a83fff irq 18 at device 0.0 on pci6 [...] [1] igb2: EEPROM V3.16-0 eTrack 0x800004d9 [...] [1] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb2: Using 4 RX queues 4 TX queues [...] [1] igb2: Using MSI-X interrupts with 5 vectors [...] [1] igb2: Ethernet address: ... [...] [1] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci7: <ACPI PCI bus> on pcib7 [...] [1] igb3: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff irq 19 at device 0.0 on pci7 [...] [1] igb3: EEPROM V3.16-0 eTrack 0x800004d9 [...] [1] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb3: Using 4 RX queues 4 TX queues [...] [1] igb3: Using MSI-X interrupts with 5 vectors [...] [1] igb3: Ethernet address: ... [...] [1] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] [1] pci8: <ACPI PCI bus> on pcib8 [...] [1] igb4: <Intel(R) I210 (Fiber)> port 0x8000-0x801f mem 0xf7800000-0xf787ffff,0xf7880000-0xf7883fff irq 16 at device 0.0 on pci8 [...] [1] igb4: EEPROM V3.20-0 eTrack 0x80000559 [...] [1] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb4: Using 4 RX queues 4 TX queues [...] [1] igb4: Using MSI-X interrupts with 5 vectors [...] [1] igb4: Ethernet address: ... [...] [1] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] [1] pci9: <ACPI PCI bus> on pcib9 [...] [1] igb5: <Intel(R) I210 (Fiber)> port 0x7000-0x701f mem 0xf7700000-0xf777ffff,0xf7780000-0xf7783fff irq 17 at device 0.0 on pci9 [...] [1] igb5: EEPROM V3.20-0 eTrack 0x80000559 [...] [1] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb5: Using 4 RX queues 4 TX queues [...] [1] igb5: Using MSI-X interrupts with 5 vectors [...] [1] igb5: Ethernet address: ... [...] [1] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib10: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] [1] pci10: <ACPI PCI bus> on pcib10 [...] [1] igb6: <Intel(R) I210 (Fiber)> port 0x6000-0x601f mem 0xf7600000-0xf767ffff,0xf7680000-0xf7683fff irq 18 at device 0.0 on pci10 [...] [1] igb6: EEPROM V3.20-0 eTrack 0x80000559 [...] [1] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb6: Using 4 RX queues 4 TX queues [...] [1] igb6: Using MSI-X interrupts with 5 vectors [...] [1] igb6: Ethernet address: ... [...] [1] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] [1] pci11: <ACPI PCI bus> on pcib11 [...] [1] igb7: <Intel(R) I210 (Fiber)> port 0x5000-0x501f mem 0xf7500000-0xf757ffff,0xf7580000-0xf7583fff irq 19 at device 0.0 on pci11 [...] [1] igb7: EEPROM V3.20-0 eTrack 0x80000559 [...] [1] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb7: Using 4 RX queues 4 TX queues [...] [1] igb7: Using MSI-X interrupts with 5 vectors [...] [1] igb7: Ethernet address: ... [...] [1] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f02000-0xf7f023ff irq 22 at device 29.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci1 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f01000-0xf7f017ff irq 19 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_tz1: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xc1000-0xc1fff,0xc2000-0xc2fff,0xc3000-0xc3fff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC-low" frequency 1546418885 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <PNY CS900 120GB SSD CS900612> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [3] uhub0: 2 ports with 2 removable, self powered [...] [3] uhub1: 2 ports with 2 removable, self powered [...] [3] Root mount waiting for: usbus0 usbus1 [...] [3] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] [3] uhub2 on uhub1 [...] [3] uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] [3] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] [3] uhub3 on uhub0 [...] [3] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] [3] uhub2: 4 ports with 4 removable, self powered [...] [4] uhub3: 6 ports with 6 removable, self powered