[...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] module_register: cannot register pci/mrsas from kernel; already loaded from mrsas.ko [...] Module pci/mrsas failed to register: 17 [...] module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko [...] Module tmpfs failed to register: 17 [...] CPU: Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz (2294.57-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133650542592 (127459 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Cisco0 CiscoUCS> [...] FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs [...] FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 8 25 36 6 10 14 30 29 3 17 32 31 16 26 23 20 5 18 27 4 39 9 24 22 11 37 15 12 28 35 34 7 2 33 19 13 38 21 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Cisco0 CiscoUCS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.5 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.5 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mrsas0: <AVAGO Invader SAS Controller> port 0x6000-0x60ff mem 0xc6f00000-0xc6f0ffff,0xc6e00000-0xc6efffff irq 34 at device 0.0 numa-domain 0 on pci5 [...] mrsas0: FW now in Ready state [...] mrsas0: Using MSI-X with 40 number of vectors [...] mrsas0: FW supports <96> MSIX vector,Online CPU 40 Current MSIX <40> [...] mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x740,sc->request_alloc_sz 0x1cf8, sc->reply_alloc_sz 0x3a00,sc->io_frames_alloc_sz 0x3a100 [...] mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0x39f sc->chain_frames_alloc_sz: 0xe7c00 [...] mrsas0: Issuing IOC INIT command to FW. [...] mrsas0: IOC INIT response received from FW. [...] mrsas0: FW supports SED [...] mrsas0: FW supports JBOD Map [...] mrsas0: Jbod map is supported [...] mrsas0: System PD created target ID: 0xc [...] mrsas0: System PD created target ID: 0x24 [...] mrsas0: System PD created target ID: 0x25 [...] mrsas0: System PD created target ID: 0x28 [...] mrsas0: System PD created target ID: 0x29 [...] mrsas0: System PD created target ID: 0x2a [...] mrsas0: System PD created target ID: 0x2b [...] mrsas0: System PD created target ID: 0x2c [...] mrsas0: System PD created target ID: 0x2d [...] mrsas0: System PD created target ID: 0x2e [...] mrsas0: System PD created target ID: 0x2f [...] mrsas0: System PD created target ID: 0x30 [...] mrsas0: System PD created target ID: 0x31 [...] mrsas0: max_fw_cmds: 927 max_scsi_cmds: 911 [...] mrsas0: MSI-x interrupts setup success [...] mrsas0: mrsas_ocr_thread [...] pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xc7000000-0xc700ffff irq 19 at device 20.0 numa-domain 0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7014000-0xc70143ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci2 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] vgapci0: <VGA-compatible display> mem 0xc5000000-0xc5ffffff,0xc6810000-0xc6813fff,0xc6000000-0xc67fffff irq 19 at device 0.0 numa-domain 0 on pci8 [...] vgapci0: Boot video device [...] pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci2 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] igb0: <Intel(R) I350 (Copper)> port 0x5020-0x503f mem 0xc6a00000-0xc6afffff,0xc6c04000-0xc6c07fff irq 16 at device 0.0 numa-domain 0 on pci9 [...] igb0: PHY reset is blocked due to SOL/IDER session. [...] igb0: EEPROM V1.63-0 Option ROM V0-b385-p144 eTrack 0x80000e75 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x5000-0x501f mem 0xc6900000-0xc69fffff,0xc6c00000-0xc6c03fff irq 17 at device 0.1 numa-domain 0 on pci9 [...] igb1: PHY reset is blocked due to SOL/IDER session. [...] igb1: EEPROM V1.63-0 Option ROM V0-b385-p144 eTrack 0x80000e75 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7013000-0xc70133ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7050-0x7057,0x7040-0x7043,0x7030-0x7037,0x7020-0x7023,0x7000-0x701f mem 0xc7012000-0xc70127ff irq 17 at device 31.2 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib10: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci10 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> irq 50 at device 1.0 numa-domain 1 on pci10 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 50 at device 1.1 numa-domain 1 on pci10 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci10 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xf020-0xf03f mem 0xfbc00000-0xfbcfffff,0xfbd04000-0xfbd07fff irq 64 at device 0.0 numa-domain 1 on pci14 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 10 RX queues 10 TX queues [...] ix0: Using MSI-X interrupts with 11 vectors [...] ix0: allocated for 10 queues [...] ix0: allocated for 10 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V0-b385-p33 eTrack 0x800008a4 [...] ix0: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xf000-0xf01f mem 0xfbb00000-0xfbbfffff,0xfbd00000-0xfbd03fff irq 68 at device 0.1 numa-domain 1 on pci14 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 10 RX queues 10 TX queues [...] ix1: Using MSI-X interrupts with 11 vectors [...] ix1: allocated for 10 queues [...] ix1: allocated for 10 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V0-b385-p33 eTrack 0x800008a4 [...] ix1: netmap queues/slots: TX 10/2048, RX 10/2048 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] module_register_init: MOD_LOAD (tmpfs, 0xffffffff80c156d0, 0xffffffff82747cb0) error 17 [...] Timecounter "TSC-low" frequency 1147235319 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 numa-domain 0 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mrsas0: Disestablish mrsas intr hook [...] ada0 at ahcich4 bus 0 scbus6 target 0 lun 0 [...] ada0: <INTEL SSDSC2BB120G6 G2010150> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada1 at ahcich5 bus 0 scbus7 target 0 lun 0 [...] ada1: <Samsung SSD 870 EVO 4TB SVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 3815447MB (7814037168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0 at mrsas0 bus 1 scbus1 target 12 lun 0 [...] ses0: <Cisco UCS-C240-M4 0a29> Fixed Enclosure Services SPC-3 SCSI device [...] ses0: 150.000MB/s transfers [...] ses0: SES Device [...] ses1 at ahciem0 bus 0 scbus8 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses1: ada0,pass13 in 'Slot 04', SATA Slot: scbus6 target 0 [...] ses1: ada1,pass14 in 'Slot 05', SATA Slot: scbus7 target 0 [...] da2 at mrsas0 bus 1 scbus1 target 40 lun 0 [...] da2: <SEAGATE ST12000NM002G E003> Fixed Direct Access SPC-5 SCSI device [...] da2: Serial Number... [...] da2: 150.000MB/s transfers [...] da2: 11444224MB (23437770752 512 byte sectors) [...] da3 at mrsas0 bus 1 scbus1 target 41 lun 0 [...] da3: <SEAGATE ST12000NM002G E003> Fixed Direct Access SPC-5 SCSI device [...] da3: Serial Number... [...] da3: 150.000MB/s transfers [...] da3: 11444224MB (23437770752 512 byte sectors) [...] ses0: da10,pass11 in 'ArrayDevice01', SAS Slot: 1 phys at slot 1 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee180 [...] ses0: da8,pass9 in 'ArrayDevice02', SAS Slot: 1 phys at slot 2 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee181 [...] ses0: da6,pass7 in 'ArrayDevice03', SAS Slot: 1 phys at slot 3 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee182 [...] ses0: da4,pass5 in 'ArrayDevice04', SAS Slot: 1 phys at slot 4 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee183 [...] ses0: da3,pass4 in 'ArrayDevice05', SAS Slot: 1 phys at slot 5 [...] ses0: phy 0: SAS device type 1 phy 0 Target ( SSP ) [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5000c500d7991c71 [...] ses0: da1,pass2 in 'ArrayDevice06', SAS Slot: 1 phys at slot 6 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee185 [...] ses0: da11,pass12 in 'ArrayDevice07', SAS Slot: 1 phys at slot 7 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee186 [...] ses0: da9,pass10 in 'ArrayDevice08', SAS Slot: 1 phys at slot 8 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee187 [...] ses0: da7,pass8 in 'ArrayDevice09', SAS Slot: 1 phys at slot 9 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee188 [...] ses0: da5,pass6 in 'ArrayDevice0A', SAS Slot: 1 phys at slot 10 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee189 [...] ses0: da2,pass3 in 'ArrayDevice0B', SAS Slot: 1 phys at slot 11 [...] ses0: phy 0: SAS device type 1 phy 0 Target ( SSP ) [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5000c500d7991f81 [...] ses0: da0,pass1 in 'ArrayDevice0C', SAS Slot: 1 phys at slot 12 [...] ses0: phy 0: SATA device [...] ses0: phy 0: parent 5ecbd1daf7dee1bf addr 5ecbd1daf7dee18b [...] da1 at mrsas0 bus 1 scbus1 target 37 lun 0 [...] da1: <ATA ST10000NM0016-1T SNE0> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 150.000MB/s transfers [...] da1: 9537536MB (19532873728 512 byte sectors) [...] da0 at mrsas0 bus 1 scbus1 target 36 lun 0 [...] da0: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 150.000MB/s transfers [...] da0: 9537536MB (19532873728 512 byte sectors) [...] da7 at mrsas0 bus 1 scbus1 target 45 lun 0 [...] da7: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da7: Serial Number... [...] da7: 150.000MB/s transfers [...] da7: 9537536MB (19532873728 512 byte sectors) [...] da10 at mrsas0 bus 1 scbus1 target 48 lun 0 [...] da10: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da10: Serial Number... [...] da10: 150.000MB/s transfers [...] da10: 9537536MB (19532873728 512 byte sectors) [...] da6 at mrsas0 bus 1 scbus1 target 44 lun 0 [...] da6: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da6: Serial Number... [...] da6: 150.000MB/s transfers [...] da6: 9537536MB (19532873728 512 byte sectors) [...] da5 at mrsas0 bus 1 scbus1 target 43 lun 0 [...] da5: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 150.000MB/s transfers [...] da5: 9537536MB (19532873728 512 byte sectors) [...] da9 at mrsas0 bus 1 scbus1 target 47 lun 0 [...] da9: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da9: Serial Number... [...] da9: 150.000MB/s transfers [...] da9: 9537536MB (19532873728 512 byte sectors) [...] da4 at mrsas0 bus 1 scbus1 target 42 lun 0 [...] da4: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da4: Serial Number... [...] da4: 150.000MB/s transfers [...] da4: 9537536MB (19532873728 512 byte sectors) [...] da11 at mrsas0 bus 1 scbus1 target 49 lun 0 [...] da11: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da11: Serial Number... [...] da11: 150.000MB/s transfers [...] da11: 9537536MB (19532873728 512 byte sectors) [...] da8 at mrsas0 bus 1 scbus1 target 46 lun 0 [...] da8: <ATA ST10000NM0086-2A SN05> Fixed Direct Access SPC-4 SCSI device [...] da8: Serial Number... [...] da8: 150.000MB/s transfers [...] da8: 9537536MB (19532873728 512 byte sectors) [...] sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen0.2: <Avocent Dell 03R874> at usbus0 [...] ukbd0 numa-domain 0 on uhub0 [...] ukbd0: <Avocent Dell 03R874, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x0424 product 0x2512> at usbus0 [...] uhub5 numa-domain 0 on uhub0 [...] uhub5: <vendor 0x0424 product 0x2512, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub5: 2 ports with 2 removable, self powered [...] ugen0.4: <Avocent Cisco USB Composite Device-0> at usbus0 [...] ukbd1 numa-domain 0 on uhub0 [...] ukbd1: <Avocent Cisco USB Composite Device-0, class 239/2, rev 2.00/0.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Cypress RAID (0x04b4:0x4721) [...] ugen0.5: <Cypress RAID> at usbus0 [...] umass0 numa-domain 0 on uhub0 [...] umass0: <Cypress RAID, class 0/0, rev 3.00/0.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:9:0: Attached to scbus9 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] da12 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] da12: <CiscoVD Boot > Fixed Direct Access SPC-4 SCSI device [...] da12: Serial Number... [...] da12: 400.000MB/s transfers [...] da12: 30432MB (62325759 512 byte sectors) [...] da12: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Swissbit USB Flash Drive (0x1370:0x0502) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Swissbit USB Flash Drive (0x1370:0x0502) [...] ugen0.6: <Swissbit USB Flash Drive> at usbus0 [...] umass1 numa-domain 0 on uhub0 [...] umass1: <Swissbit USB Flash Drive, class 0/0, rev 3.10/1.00, addr 5> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x8100 [...] umass1:10:1: Attached to scbus10 [...] (probe0:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim1:1:0:0): SCSI status: Check Condition [...] (probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim1:1:0:0): Error 22, Unretryable error [...] da13 at umass-sim1 bus 1 scbus10 target 0 lun 0 [...] da13: <Swissbit USB Flash Drive 0100> Removable Direct Access SPC-4 SCSI device [...] da13: Serial Number... [...] da13: 400.000MB/s transfers [...] da13: 15296MB (31326208 512 byte sectors) [...] da13: quirks=0x2<NO_6_BYTE> [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ums0 numa-domain 0 on uhub0 [...] ums0: <Avocent Dell 03R874, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 numa-domain 0 on uhub0 [...] ums1: <Avocent Cisco USB Composite Device-0, class 239/2, rev 2.00/0.00, addr 3> on usbus0 [...] ums1: 3 buttons and [Z] coordinates ID=0 [...] ums2 numa-domain 0 on uhub0 [...] ums2: <Avocent Cisco USB Composite Device-0, class 239/2, rev 2.00/0.00, addr 3> on usbus0 [...] ums2: 3 buttons and [XYZ] coordinates ID=0