[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] CPU microcode: updated from 0x6000817 to 0x6000852 [...] CPU: AMD FX(tm)-6350 Six-Core Processor (4700.25-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1eb3fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16585433088 (15817 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 4 3 5 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> mem 0xfe500000-0xfe5fffff,0xfe600000-0xfe603fff irq 44 at device 0.0 on pci2 [...] igb0: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 48 at device 0.0 on pci3 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe807000-0xfe8073ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe805000-0xfe8050ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe804000-0xfe804fff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe803000-0xfe8030ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe802000-0xfe802fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb1: <Intel(R) I210 (Copper)> mem 0xfe200000-0xfe2fffff,0xfe300000-0xfe303fff irq 16 at device 0.0 on pci5 [...] igb1: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 19 at device 0.0 on pci6 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe801000-0xfe801fff irq 18 at device 22.0 on pci0 [...] usbus6 on ohci3 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe800000-0xfe8000ff irq 17 at device 22.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci2 [...] usbus7: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 15.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1175010779 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <(0x1b6f) XHCI root HUB> at usbus0 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub0 on usbus5 [...] uhub1 on usbus0 [...] uhub2 on usbus1 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub3 on usbus6 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub4 on usbus7 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub1: <(0x1b6f) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub5 on usbus2 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub6 on usbus4 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub7 on usbus3 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub7: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus2 usbus4 usbus7 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD3200BPVT-22JJ5T0 01.01A01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <KINGSTON SV300S37A120G 603ABBF0> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ata0 bus 0 scbus4 target 0 lun 0 [...] ada2: <HGST HTS545050A7E680 GG2OAH10> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada2: 476940MB (976773168 512 byte sectors) [...] Root mount waiting for: usbus4 ada ada ada [...] GEOM_MIRROR: Device mirror/swap launched (3/3). [...] ugen3.2: <ROCCAT ROCCAT Isku> at usbus3 [...] ukbd0 on uhub7 [...] ukbd0: <ROCCAT ROCCAT Isku, class 0/0, rev 2.00/1.00, addr 2> on usbus3 [...] kbd2 at ukbd0 [...] CPU: AMD FX(tm)-6350 Six-Core Processor (4700.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1eb3fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub7 [...] uhid0: <ROCCAT ROCCAT Isku, class 0/0, rev 2.00/1.00, addr 2> on usbus3 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] vlan01: link state changed to UP [...] Security policy loaded: TrustedBSD MAC/portacl (mac_portacl) [...] tap9993: Ethernet address: ... [...] tap9993: changing name to 'zta1ivkmol101us' [...] zta1ivkmol101us: link state changed to UP [...] pid 93694 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] igb1: link state changed to DOWN [...] igb1: promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: promiscuous mode disabled [...] pid 64337 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] zta1ivkmol101us: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6m57s [...] GEOM_MIRROR: Device swap: provider destroyed. [...] GEOM_MIRROR: Device swap destroyed. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] CPU microcode: updated from 0x6000817 to 0x6000852 [...] CPU: AMD FX(tm)-6350 Six-Core Processor (4700.23-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1eb3fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16585428992 (15817 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 5 2 4 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> mem 0xfe500000-0xfe5fffff,0xfe600000-0xfe603fff irq 44 at device 0.0 on pci2 [...] igb0: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 48 at device 0.0 on pci3 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe807000-0xfe8073ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe805000-0xfe8050ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe804000-0xfe804fff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe803000-0xfe8030ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe802000-0xfe802fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb1: <Intel(R) I210 (Copper)> mem 0xfe200000-0xfe2fffff,0xfe300000-0xfe303fff irq 16 at device 0.0 on pci5 [...] igb1: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 19 at device 0.0 on pci6 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe801000-0xfe801fff irq 18 at device 22.0 on pci0 [...] usbus6 on ohci3 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe800000-0xfe8000ff irq 17 at device 22.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci2 [...] usbus7: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 15.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1175010921 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub0 on usbus5 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen0.1: <(0x1b6f) XHCI root HUB> at usbus0 [...] uhub1 on usbus2 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus4 [...] uhub3 on usbus0 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub3: <(0x1b6f) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub4 on usbus6 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub5 on usbus3 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub6 on usbus7 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub7 on usbus1 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub7: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus2 usbus4 usbus7 [...] uhub6: 4 ports with 4 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD3200BPVT-22JJ5T0 01.01A01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <KINGSTON SV300S37A120G 603ABBF0> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ata0 bus 0 scbus4 target 0 lun 0 [...] ada2: <HGST HTS545050A7E680 GG2OAH10> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada2: 476940MB (976773168 512 byte sectors) [...] Root mount waiting for: usbus4 ada ada ada [...] ugen3.2: <ROCCAT ROCCAT Isku> at usbus3 [...] ukbd0 on uhub5 [...] ukbd0: <ROCCAT ROCCAT Isku, class 0/0, rev 2.00/1.00, addr 2> on usbus3 [...] kbd2 at ukbd0 [...] GEOM_MIRROR: Force device swap start due to timeout. [...] (ada2:ata0:0:0:0): READ_DMA48. ACB: 25 00 fe 5f 38 40 3a 00 00 00 01 00 [...] (ada2:ata0:0:0:0): CAM status: Command timeout [...] (ada2:ata0:0:0:0): Retrying command, 3 more tries remain [...] GEOM_MIRROR: Device mirror/swap launched (2/3). [...] (ada2:ata0:0:0:0): READ_DMA48. ACB: 25 00 ff 5f 38 40 3a 00 00 00 01 00 [...] (ada2:ata0:0:0:0): CAM status: Command timeout [...] (ada2:ata0:0:0:0): Retrying command, 3 more tries remain [...] CPU: AMD FX(tm)-6350 Six-Core Processor (4700.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1eb3fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] uhid0 on uhub5 [...] uhid0: <ROCCAT ROCCAT Isku, class 0/0, rev 2.00/1.00, addr 2> on usbus3 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] vlan01: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] tap9993: Ethernet address: ... [...] tap9993: changing name to 'zta1ivkmol101us' [...] zta1ivkmol101us: link state changed to UP [...] pid 57069 (squid), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 58834 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] pid 59421 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] pid 61331 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] pid 61975 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] pid 62972 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] pid 57777 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb1: link state changed to DOWN [...] igb1: promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] pid 2831 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb1: promiscuous mode disabled [...] igb1: link state changed to DOWN [...] igb1: promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] vlan0: changing name to 'vlan01' [...] pid 20589 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb1: promiscuous mode disabled [...] zta1ivkmol101us: link state changed to DOWN [...] tap9993: Ethernet address: ... [...] tap9993: changing name to 'zta1ivkmol101us' [...] zta1ivkmol101us: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] pid 6413 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb1: promiscuous mode disabled [...] zta1ivkmol101us: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 3h15m13s [...] GEOM_MIRROR: Device swap: provider destroyed. [...] GEOM_MIRROR: Device swap destroyed. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] CPU microcode: updated from 0x6000817 to 0x6000852 [...] CPU: AMD FX(tm)-6350 Six-Core Processor (4700.28-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1eb3fff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16585428992 (15817 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 5 4 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> mem 0xfe500000-0xfe5fffff,0xfe600000-0xfe603fff irq 44 at device 0.0 on pci2 [...] igb0: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 48 at device 0.0 on pci3 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe807000-0xfe8073ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe805000-0xfe8050ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe804000-0xfe804fff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe803000-0xfe8030ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe802000-0xfe802fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb1: <Intel(R) I210 (Copper)> mem 0xfe200000-0xfe2fffff,0xfe300000-0xfe303fff irq 16 at device 0.0 on pci5 [...] igb1: EEPROM V3.25-0 Option ROM V1-b1824-p0 eTrack 0x800006eb [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 19 at device 0.0 on pci6 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe801000-0xfe801fff irq 18 at device 22.0 on pci0 [...] usbus6 on ohci3 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe800000-0xfe8000ff irq 17 at device 22.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci2 [...] usbus7: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 15.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1175010839 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen0.1: <(0x1b6f) XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub1 on usbus3 [...] uhub2 on usbus0 [...] uhub2: <(0x1b6f) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub3 on usbus1 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4 on usbus7 [...] uhub5 on usbus5 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub6 on usbus6 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] uhub7 on usbus4 [...] uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub5: 2 ports with 2 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus2 usbus4 usbus7 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub7: 5 ports with 5 removable, self powered [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD3200BPVT-22JJ5T0 01.01A01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <KINGSTON SV300S37A120G 603ABBF0> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada2 at ata0 bus 0 scbus4 target 0 lun 0 [...] ada2: <HGST HTS545050A7E680 GG2OAH10> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada2: 476940MB (976773168 512 byte sectors) [...] Root mount waiting for: usbus4 ada ada ada [...] GEOM_MIRROR: Device mirror/swap launched (3/3). [...] ugen3.2: <ROCCAT ROCCAT Isku> at usbus3 [...] ukbd0 on uhub1 [...] ukbd0: <ROCCAT ROCCAT Isku, class 0/0, rev 2.00/1.00, addr 2> on usbus3 [...] kbd2 at ukbd0