[...] ---<<BOOT>>--- [...] APIC: Using the MADT enumerator. [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE #26 machines/trant-n248254-333705907a26-dirty: Sun Nov 28 23:55:38 EET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] WARNING: WITNESS option enabled, expect reduced performance. [...] PPIM 0: PA=0xb8000, VA=0xffffffff85510000, size=0x8000, mode=0 [...] pmap: large map 8 PML4 slots (4096 GB) [...] VT(vga): text 80x25 [...] Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff853b0518. [...] Preloaded elf obj module "/boot/kernel/amdsbwd.ko" at 0xffffffff853b13d0. [...] Preloaded elf obj module "/boot/kernel/intpm.ko" at 0xffffffff853b19b8. [...] Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff853b1fa0. [...] Preloaded elf obj module "/boot/kernel/nmdm.ko" at 0xffffffff853b2508. [...] Preloaded elf obj module "/boot/kernel/dtraceall.ko" at 0xffffffff853b2b30. [...] Preloaded elf obj module "/boot/kernel/profile.ko" at 0xffffffff853b3060. [...] Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff853b3748. [...] Preloaded elf obj module "/boot/kernel/dtrace.ko" at 0xffffffff853b3db8. [...] Preloaded elf obj module "/boot/kernel/systrace_freebsd32.ko" at 0xffffffff853b44a0. [...] Preloaded elf obj module "/boot/kernel/systrace.ko" at 0xffffffff853b4b18. [...] Preloaded elf obj module "/boot/kernel/sdt.ko" at 0xffffffff853b5188. [...] Preloaded elf obj module "/boot/kernel/fasttrap.ko" at 0xffffffff853b57b0. [...] Preloaded elf obj module "/boot/kernel/fbt.ko" at 0xffffffff853b5ea0. [...] Preloaded elf obj module "/boot/kernel/dtnfscl.ko" at 0xffffffff853b6508. [...] Preloaded elf obj module "/boot/kernel/dtmalloc.ko" at 0xffffffff853b6b70. [...] Preloaded hostuuid "/etc/hostid" at 0xffffffff853b71e0. [...] Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff853b7230. [...] Preloaded elf obj module "/boot/modules/nvidia-modeset.ko" at 0xffffffff853b7818. [...] Preloaded elf obj module "/boot/kernel/linux_common.ko" at 0xffffffff853b7e88. [...] Preloaded elf obj module "/boot/kernel/linux.ko" at 0xffffffff853b8778. [...] Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff853b8fe0. [...] Preloaded elf obj module "/boot/kernel/jedec_dimm.ko" at 0xffffffff853b9688. [...] Preloaded elf obj module "/boot/kernel/iic.ko" at 0xffffffff853b9c78. [...] Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff853ba2e0. [...] Preloaded elf obj module "/boot/kernel/vmm.ko" at 0xffffffff853ba948. [...] Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff853bb1b0. [...] Preloaded elf obj module "/boot/kernel/cp2112.ko" at 0xffffffff853bb208. [...] Preloaded elf obj module "/boot/kernel/gpiobus.ko" at 0xffffffff853bb930. [...] Calibrating TSC clock ... TSC clock: 3210887786 Hz [...] CPU: AMD Phenom(tm) II X6 1090T Processor (3210.89-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId> [...] SVM: Features=0x40f<NP,LbrVirt,SVML,NRIPS,PauseFilter> [...] Revision=1, ASIDs=64 [...] TSC: P-state invariant, performance statistics [...] L1 2MB data TLB: 48 entries, fully associative [...] L1 2MB instruction TLB: 16 entries, fully associative [...] L1 4KB data TLB: 48 entries, fully associative [...] L1 4KB instruction TLB: 32 entries, fully associative [...] L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative [...] L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative [...] L2 2MB data TLB: 128 entries, 2-way associative [...] L2 2MB instruction TLB: 0 entries, 2-way associative [...] L2 4KB data TLB: 512 entries, 4-way associative [...] L2 4KB instruction TLB: 512 entries, 4-way associative [...] L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative [...] real memory = 34359738368 (32768 MB) [...] Physical memory chunk(s): [...] 0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages) [...] 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) [...] 0x0000000005519000 - 0x00000000cd829fff, 3358658560 bytes (819985 pages) [...] 0x00000000cdd71000 - 0x00000000cdefffff, 1634304 bytes (399 pages) [...] 0x0000000100002000 - 0x00000007f9b70fff, 29959319552 bytes (7314287 pages) [...] 0x000000082f200000 - 0x000000082f28bfff, 573440 bytes (140 pages) [...] avail memory = 33255813120 (31715 MB) [...] MADT: Found CPU APIC ID 0 ACPI ID 1: enabled [...] SMP: Added CPU 0 (AP) [...] MADT: Found CPU APIC ID 1 ACPI ID 2: enabled [...] SMP: Added CPU 1 (AP) [...] MADT: Found CPU APIC ID 2 ACPI ID 3: enabled [...] SMP: Added CPU 2 (AP) [...] MADT: Found CPU APIC ID 3 ACPI ID 4: enabled [...] SMP: Added CPU 3 (AP) [...] MADT: Found CPU APIC ID 4 ACPI ID 5: enabled [...] SMP: Added CPU 4 (AP) [...] MADT: Found CPU APIC ID 5 ACPI ID 6: enabled [...] SMP: Added CPU 5 (AP) [...] MADT: Found CPU APIC ID 7 ACPI ID 7: disabled [...] MADT: Found CPU APIC ID 8 ACPI ID 8: disabled [...] Event timer "LAPIC" quality 100 [...] LAPIC: ipi_wait() us multiplier 45 (r 7000350 tsc 3210887786) [...] ACPI APIC Table: <ALASKA A M I> [...] Package ID shift: 3 [...] L3 cache ID shift: 3 [...] L2 cache ID shift: 0 [...] L1 cache ID shift: 0 [...] Core ID shift: 0 [...] AP boot address 0x98000 [...] INTR: Adding local APIC 1 as a target [...] INTR: Adding local APIC 2 as a target [...] INTR: Adding local APIC 3 as a target [...] INTR: Adding local APIC 4 as a target [...] INTR: Adding local APIC 5 as a target [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] Package HW ID = 0 [...] Core HW ID = 0 [...] CPU0 (BSP): APIC ID: 0 [...] Core HW ID = 1 [...] CPU1 (AP): APIC ID: 1 [...] Core HW ID = 2 [...] CPU2 (AP): APIC ID: 2 [...] Core HW ID = 3 [...] CPU3 (AP): APIC ID: 3 [...] Core HW ID = 4 [...] CPU4 (AP): APIC ID: 4 [...] Core HW ID = 5 [...] CPU5 (AP): APIC ID: 5 [...] APIC: CPU 0 has ACPI ID 1 [...] APIC: CPU 1 has ACPI ID 2 [...] APIC: CPU 2 has ACPI ID 3 [...] APIC: CPU 3 has ACPI ID 4 [...] APIC: CPU 4 has ACPI ID 5 [...] APIC: CPU 5 has ACPI ID 6 [...] x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 [...] x86bios: SSEG 0x098000-0x098fff at 0xfffffe00356a1000 [...] x86bios: EBDA 0x09c000-0x09ffff at 0xfffff8000009c000 [...] x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 [...] lapic0: MCE Thresholding ELVT unmasked [...] amd_thresholding_monitor: Starting AMD thresholding on bank 4 [...] Pentium Pro MTRR support enabled [...] random: read 4096 bytes from preloaded cache [...] random: unblocking device. [...] hostuuid: using HASH_BB6-5A8A-1BC8-2DE2-08EA40DB86F3 [...] ULE: setup cpu 0 [...] ULE: setup cpu 1 [...] ULE: setup cpu 2 [...] ULE: setup cpu 3 [...] ULE: setup cpu 4 [...] ULE: setup cpu 5 [...] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [...] ACPI: XSDT 0x00000000CDAF2070 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: FACP 0x00000000CDAFAD18 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ACPI: DSDT 0x00000000CDAF2158 008BBC (v02 ALASKA A M I 00000000 INTL 20051117) [...] ACPI: FACS 0x00000000CDB06F80 000040 [...] ACPI: APIC 0x00000000CDAFAE10 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: MCFG 0x00000000CDAFAEB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [...] ACPI: HPET 0x00000000CDAFAEF0 000038 (v01 ALASKA A M I 01072009 AMI 00000004) [...] ACPI: SSDT 0x00000000CDAFB060 000E10 (v01 AMD POWERNOW 00000001 AMD 00000001) [...] ACPI: IVRS 0x00000000CDAFAF80 0000E0 (v01 AMD RD890S 00202031 AMD 00000000) [...] MADT: Found IO APIC ID 7, Interrupt 0 at 0xfec00000 [...] ioapic0: ver 0x21 maxredir 0x17 [...] ioapic0: Routing external 8259A's -> intpin 0 [...] MADT: Found IO APIC ID 8, Interrupt 24 at 0xfec20000 [...] ioapic1: ver 0x21 maxredir 0x1f [...] MADT: Interrupt override: source 0, irq 2 [...] ioapic0: Routing IRQ 0 -> intpin 2 [...] MADT: Interrupt override: source 9, irq 9 [...] ioapic0: intpin 9 trigger: level [...] ioapic0: intpin 9 polarity: low [...] lapic: Routing NMI -> LINT1 [...] lapic: LINT1 trigger: edge [...] lapic: LINT1 polarity: high [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] lapic: Divisor 2, Frequency 100340284 Hz [...] cpu0 BSP: [...] ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x000000f2 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled [...] SMP: AP CPU #1 Launched! [...] cpu1 AP: [...] ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x00010000 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled [...] SMP: AP CPU #5 Launched! [...] cpu5 AP: [...] ID: 0x05000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x00010000 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled [...] SMP: AP CPU #3 Launched! [...] cpu3 AP: [...] ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x00010000 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled [...] SMP: AP CPU #2 Launched! [...] cpu2 AP: [...] ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x00010000 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled [...] SMP: AP CPU #4 Launched! [...] cpu4 AP: [...] ID: 0x04000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] AMD ext features: 0x00040007 [...] AMD elvt0: 0x00010000 [...] AMD elvt1: 0x00010000 [...] AMD elvt2: 0x00010000 [...] AMD elvt3: 0x00010000 [...] SMP: passed TSC synchronization test [...] TSC timecounter discards lower 1 bit(s) [...] Timecounter "TSC-low" frequency 1605443893 Hz quality 800 [...] random: entropy device external interface [...] snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] [...] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 [...] EFI systbl not available [...] crypto: <crypto core> [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd: new array size 4 [...] kbd1 at kbdmux0 [...] mem: <memory> [...] null: <full device, null device, zero device> [...] cpuctl: access to MSR registers/cpuid info. [...] io: <I/O> [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.86 Tue Oct 26 21:43:42 UTC 2021 [...] vtvga0: <VT VGA driver> [...] crypto: assign cryptosoft0 driver id 0, flags 0x6000000 [...] acpi0: <ALASKA A M I> [...] ACPI: 2 ACPI AML tables successfully acquired and loaded [...] PCIe: Memory Mapped configuration base @ 0xe0000000 [...] ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 [...] acpi0: Power Button (fixed) [...] acpi0: wakeup code va 0xfffffe0120c7e000 pa 0x99000 [...] AMD-Vi: IVRS Info VAsize = 64 PAsize = 52 GVAsize = 0 flags:0 [...] cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0 [...] cpu0: <ACPI CPU> on acpi0 [...] cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1 [...] cpu1: <ACPI CPU> on acpi0 [...] cpu2: Processor \134_PR_.P003 (ACPI ID 3) -> APIC ID 2 [...] cpu2: <ACPI CPU> on acpi0 [...] cpu3: Processor \134_PR_.P004 (ACPI ID 4) -> APIC ID 3 [...] cpu3: <ACPI CPU> on acpi0 [...] cpu4: Processor \134_PR_.P005 (ACPI ID 5) -> APIC ID 4 [...] cpu4: <ACPI CPU> on acpi0 [...] cpu5: Processor \134_PR_.P006 (ACPI ID 6) -> APIC ID 5 [...] cpu5: <ACPI CPU> on acpi0 [...] ACPI: Processor \134_PR_.P007 (ACPI ID 7) ignored [...] ACPI: Processor \134_PR_.P008 (ACPI ID 8) ignored [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 1 vector 48 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48 [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49 [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route [...] hpet0: t0: irqs 0x00c00000 (0), MSI, periodic [...] hpet0: t1: irqs 0x00c00000 (0), MSI, periodic [...] hpet0: t2: irqs 0x00c00000 (0), MSI, periodic [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] msi: routing MSI-X IRQ 56 to local APIC 3 vector 48 [...] msi: routing MSI-X IRQ 57 to local APIC 4 vector 48 [...] msi: routing MSI-X IRQ 58 to local APIC 5 vector 48 [...] msi: Assigning MSI-X IRQ 56 to local APIC 0 vector 50 [...] msi: Assigning MSI-X IRQ 57 to local APIC 0 vector 51 [...] msi: Assigning MSI-X IRQ 58 to local APIC 0 vector 52 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] ACPI timer: -> 10 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pci_link0: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link1: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link2: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link3: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 10 11 14 15 [...] Validation 0 255 N 0 3 4 10 11 14 15 [...] After Disable 0 255 N 0 3 4 10 11 14 15 [...] pci_link4: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link5: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link6: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pci_link7: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 4 7 10 11 14 15 [...] Validation 0 255 N 0 4 7 10 11 14 15 [...] After Disable 0 255 N 0 4 7 10 11 14 15 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: decoding 5 range 0-0xff [...] pcib0: decoding 4 range 0-0x3af [...] pcib0: decoding 4 range 0x3e0-0xcf7 [...] pcib0: decoding 4 range 0x3b0-0x3df [...] pcib0: decoding 4 range 0xd00-0xffff [...] pcib0: decoding 3 range 0xa0000-0xbffff [...] pcib0: decoding 3 range 0xc0000-0xdffff [...] pcib0: decoding 3 range 0xd0000000-0xffffffff [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: domain=0, physical bus=0 [...] found-> vendor=0x1002, dev=0x5a14, revid=0x02 [...] domain=0, bus=0, slot=0, func=0 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] MSI supports 4 messages [...] found-> vendor=0x1002, dev=0x5a23, revid=0x00 [...] domain=0, bus=0, slot=0, func=2 [...] class=08-06-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] MSI supports 1 message, 64 bit [...] found-> vendor=0x1002, dev=0x5a16, revid=0x00 [...] domain=0, bus=0, slot=2, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.2.INTA [...] pcib0: slot 2 INTA hardwired to IRQ 52 [...] secbus=1, subbus=1 [...] found-> vendor=0x1002, dev=0x5a17, revid=0x00 [...] domain=0, bus=0, slot=3, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.3.INTA [...] pcib0: slot 3 INTA hardwired to IRQ 52 [...] secbus=2, subbus=2 [...] found-> vendor=0x1002, dev=0x5a18, revid=0x00 [...] domain=0, bus=0, slot=4, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.4.INTA [...] pcib0: slot 4 INTA hardwired to IRQ 52 [...] secbus=3, subbus=3 [...] found-> vendor=0x1002, dev=0x5a19, revid=0x00 [...] domain=0, bus=0, slot=5, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.5.INTA [...] pcib0: slot 5 INTA hardwired to IRQ 52 [...] secbus=4, subbus=4 [...] found-> vendor=0x1002, dev=0x5a1a, revid=0x00 [...] domain=0, bus=0, slot=6, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=10 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.6.INTA [...] pcib0: slot 6 INTA hardwired to IRQ 53 [...] secbus=5, subbus=5 [...] found-> vendor=0x1002, dev=0x5a1b, revid=0x00 [...] domain=0, bus=0, slot=7, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=10 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.7.INTA [...] pcib0: slot 7 INTA hardwired to IRQ 53 [...] secbus=6, subbus=6 [...] found-> vendor=0x1002, dev=0x5a1d, revid=0x00 [...] domain=0, bus=0, slot=10, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] pcib0: matched entry for 0.10.INTA [...] pcib0: slot 10 INTA hardwired to IRQ 54 [...] secbus=7, subbus=7 [...] found-> vendor=0x1002, dev=0x4391, revid=0x40 [...] domain=0, bus=0, slot=17, func=0 [...] class=01-06-01, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=3 [...] map[10]: type I/O Port, range 32, base 0xf040, size 3, enabled [...] pcib0: allocated type 4 (0xf040-0xf047) for rid 10 of pci0:0:17:0 [...] map[14]: type I/O Port, range 32, base 0xf030, size 2, enabled [...] pcib0: allocated type 4 (0xf030-0xf033) for rid 14 of pci0:0:17:0 [...] map[18]: type I/O Port, range 32, base 0xf020, size 3, enabled [...] pcib0: allocated type 4 (0xf020-0xf027) for rid 18 of pci0:0:17:0 [...] map[1c]: type I/O Port, range 32, base 0xf010, size 2, enabled [...] pcib0: allocated type 4 (0xf010-0xf013) for rid 1c of pci0:0:17:0 [...] map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled [...] pcib0: allocated type 4 (0xf000-0xf00f) for rid 20 of pci0:0:17:0 [...] map[24]: type Memory, range 32, base 0xfe80b000, size 10, enabled [...] pcib0: allocated type 3 (0xfe80b000-0xfe80b3ff) for rid 24 of pci0:0:17:0 [...] pcib0: matched entry for 0.17.INTA [...] pcib0: slot 17 INTA hardwired to IRQ 19 [...] found-> vendor=0x1002, dev=0x4397, revid=0x00 [...] domain=0, bus=0, slot=18, func=0 [...] class=0c-03-10, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=7 [...] map[10]: type Memory, range 32, base 0xfe80a000, size 12, enabled [...] pcib0: allocated type 3 (0xfe80a000-0xfe80afff) for rid 10 of pci0:0:18:0 [...] pcib0: matched entry for 0.18.INTA [...] pcib0: slot 18 INTA hardwired to IRQ 18 [...] ohci early: SMM active, request owner change [...] found-> vendor=0x1002, dev=0x4396, revid=0x00 [...] domain=0, bus=0, slot=18, func=2 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=7 [...] powerspec 2 supports D0 D1 D2 D3 current D0 [...] map[10]: type Memory, range 32, base 0xfe809000, size 8, enabled [...] pcib0: allocated type 3 (0xfe809000-0xfe8090ff) for rid 10 of pci0:0:18:2 [...] pcib0: matched entry for 0.18.INTB [...] pcib0: slot 18 INTB hardwired to IRQ 17 [...] found-> vendor=0x1002, dev=0x4397, revid=0x00 [...] domain=0, bus=0, slot=19, func=0 [...] class=0c-03-10, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] map[10]: type Memory, range 32, base 0xfe808000, size 12, enabled [...] pcib0: allocated type 3 (0xfe808000-0xfe808fff) for rid 10 of pci0:0:19:0 [...] pcib0: matched entry for 0.19.INTA [...] pcib0: slot 19 INTA hardwired to IRQ 20 [...] ohci early: SMM active, request owner change [...] found-> vendor=0x1002, dev=0x4396, revid=0x00 [...] domain=0, bus=0, slot=19, func=2 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=10 [...] powerspec 2 supports D0 D1 D2 D3 current D0 [...] map[10]: type Memory, range 32, base 0xfe807000, size 8, enabled [...] pcib0: allocated type 3 (0xfe807000-0xfe8070ff) for rid 10 of pci0:0:19:2 [...] pcib0: matched entry for 0.19.INTB [...] pcib0: slot 19 INTB hardwired to IRQ 21 [...] found-> vendor=0x1002, dev=0x4385, revid=0x42 [...] domain=0, bus=0, slot=20, func=0 [...] class=0c-05-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1002, dev=0x4383, revid=0x40 [...] domain=0, bus=0, slot=20, func=2 [...] class=04-03-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=10 [...] powerspec 2 supports D0 D3 current D0 [...] map[10]: type Memory, range 64, base 0xfe800000, size 14, enabled [...] pcib0: allocated type 3 (0xfe800000-0xfe803fff) for rid 10 of pci0:0:20:2 [...] pcib0: matched entry for 0.20.INTA [...] pcib0: slot 20 INTA hardwired to IRQ 16 [...] found-> vendor=0x1002, dev=0x439d, revid=0x40 [...] domain=0, bus=0, slot=20, func=3 [...] class=06-01-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1002, dev=0x4384, revid=0x40 [...] domain=0, bus=0, slot=20, func=4 [...] class=06-04-01, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) [...] lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] secbus=8, subbus=8 [...] found-> vendor=0x1002, dev=0x4399, revid=0x00 [...] domain=0, bus=0, slot=20, func=5 [...] class=0c-03-10, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=7 [...] map[10]: type Memory, range 32, base 0xfe806000, size 12, enabled [...] pcib0: allocated type 3 (0xfe806000-0xfe806fff) for rid 10 of pci0:0:20:5 [...] pcib0: matched entry for 0.20.INTC [...] pcib0: slot 20 INTC hardwired to IRQ 18 [...] ohci early: SMM active, request owner change [...] found-> vendor=0x1002, dev=0x4397, revid=0x00 [...] domain=0, bus=0, slot=22, func=0 [...] class=0c-03-10, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] map[10]: type Memory, range 32, base 0xfe805000, size 12, enabled [...] pcib0: allocated type 3 (0xfe805000-0xfe805fff) for rid 10 of pci0:0:22:0 [...] pcib0: matched entry for 0.22.INTA [...] pcib0: slot 22 INTA hardwired to IRQ 22 [...] ohci early: SMM active, request owner change [...] found-> vendor=0x1002, dev=0x4396, revid=0x00 [...] domain=0, bus=0, slot=22, func=2 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=11 [...] powerspec 2 supports D0 D1 D2 D3 current D0 [...] map[10]: type Memory, range 32, base 0xfe804000, size 8, enabled [...] pcib0: allocated type 3 (0xfe804000-0xfe8040ff) for rid 10 of pci0:0:22:2 [...] pcib0: matched entry for 0.22.INTB [...] pcib0: slot 22 INTB hardwired to IRQ 23 [...] found-> vendor=0x1022, dev=0x1200, revid=0x00 [...] domain=0, bus=0, slot=24, func=0 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1022, dev=0x1201, revid=0x00 [...] domain=0, bus=0, slot=24, func=1 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1022, dev=0x1202, revid=0x00 [...] domain=0, bus=0, slot=24, func=2 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1022, dev=0x1203, revid=0x00 [...] domain=0, bus=0, slot=24, func=3 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x1022, dev=0x1204, revid=0x00 [...] domain=0, bus=0, slot=24, func=4 [...] class=06-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] amdiommu0 at device 0.2 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1 [...] pcib0: allocated type 3 (0xfd000000-0xfe0fffff) for rid 20 of pcib1 [...] pcib0: allocated type 3 (0xd0000000-0xd9ffffff) for rid 24 of pcib1 [...] pcib1: domain 0 [...] pcib1: secondary bus 1 [...] pcib1: subordinate bus 1 [...] pcib1: I/O decode 0xe000-0xefff [...] pcib1: memory decode 0xfd000000-0xfe0fffff [...] pcib1: prefetched decode 0xd0000000-0xd9ffffff [...] pcib1: special decode VGA [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib1: allocated bus range (1-1) for rid 0 of pci1 [...] pci1: domain=0, physical bus=1 [...] found-> vendor=0x10de, dev=0x1287, revid=0xa1 [...] domain=0, bus=1, slot=0, func=0 [...] class=03-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=10 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled [...] pcib1: allocated memory range (0xfd000000-0xfdffffff) for rid 10 of pci0:1:0:0 [...] map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 27, enabled [...] pcib1: allocated prefetch range (0xd0000000-0xd7ffffff) for rid 14 of pci0:1:0:0 [...] map[1c]: type Prefetchable Memory, range 64, base 0xd8000000, size 25, enabled [...] pcib1: allocated prefetch range (0xd8000000-0xd9ffffff) for rid 1c of pci0:1:0:0 [...] map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled [...] pcib1: allocated I/O port range (0xe000-0xe07f) for rid 24 of pci0:1:0:0 [...] pcib1: matched entry for 1.0.INTA [...] pcib1: slot 0 INTA hardwired to IRQ 24 [...] found-> vendor=0x10de, dev=0x0e0f, revid=0xa1 [...] domain=0, bus=1, slot=0, func=1 [...] class=04-03-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=7 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 32, base 0xfe080000, size 14, enabled [...] pcib1: allocated memory range (0xfe080000-0xfe083fff) for rid 10 of pci0:1:0:1 [...] pcib1: matched entry for 1.0.INTB [...] pcib1: slot 0 INTB hardwired to IRQ 25 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xd0000000-0xd7ffffff,0xd8000000-0xd9ffffff irq 24 at device 0.0 on pci1 [...] nvidia0: <NVIDIA GeForce GT 730> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 59 to local APIC 0 vector 53 [...] vgapci0: using IRQ 59 for MSI [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 [...] hdac0: PCI card vendor: 0x1043, device: 0x8525 [...] hdac0: HDA Driver Revision: 20120126_0002 [...] hdac0: Config options: on=0x00000000 off=0x00000000 [...] hdac0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 60 to local APIC 1 vector 49 [...] hdac0: using IRQ 60 for MSI [...] hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 4, 64bit, CORB 256, RIRB 256 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 3.0 on pci0 [...] pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2 [...] pcib0: allocated type 3 (0xfe100000-0xfe2fffff) for rid 20 of pcib2 [...] pcib2: domain 0 [...] pcib2: secondary bus 2 [...] pcib2: subordinate bus 2 [...] pcib2: I/O decode 0xd000-0xdfff [...] pcib2: memory decode 0xfe100000-0xfe2fffff [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib2: allocated bus range (2-2) for rid 0 of pci2 [...] pci2: domain=0, physical bus=2 [...] found-> vendor=0x1000, dev=0x0087, revid=0x05 [...] domain=0, bus=2, slot=0, func=0 [...] class=01-07-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D1 D2 D3 current D0 [...] MSI supports 1 message, 64 bit [...] MSI-X supports 16 messages in map 0x14 [...] map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled [...] pcib2: allocated I/O port range (0xd000-0xd0ff) for rid 10 of pci0:2:0:0 [...] map[14]: type Memory, range 64, base 0xfe240000, size 16, enabled [...] pcib2: allocated memory range (0xfe240000-0xfe24ffff) for rid 14 of pci0:2:0:0 [...] map[1c]: type Memory, range 64, base 0xfe200000, size 18, enabled [...] pcib2: allocated memory range (0xfe200000-0xfe23ffff) for rid 1c of pci0:2:0:0 [...] pcib2: matched entry for 2.0.INTA [...] pcib2: slot 0 INTA hardwired to IRQ 28 [...] mps0: <Avago Technologies (LSI) SAS2308> port 0xd000-0xd0ff mem 0xfe240000-0xfe24ffff,0xfe200000-0xfe23ffff irq 28 at device 0.0 on pci2 [...] mps0: attempting to allocate 1 MSI-X vectors (16 supported) [...] msi: routing MSI-X IRQ 61 to local APIC 2 vector 48 [...] mps0: using IRQ 61 for MSI-X [...] mps0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc> [...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3 [...] pcib0: allocated type 3 (0xda100000-0xda1fffff) for rid 24 of pcib3 [...] pcib3: domain 0 [...] pcib3: secondary bus 3 [...] pcib3: subordinate bus 3 [...] pcib3: I/O decode 0xc000-0xcfff [...] pcib3: prefetched decode 0xda100000-0xda1fffff [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib3: allocated bus range (3-3) for rid 0 of pci3 [...] pci3: domain=0, physical bus=3 [...] found-> vendor=0x10ec, dev=0x8168, revid=0x06 [...] domain=0, bus=3, slot=0, func=0 [...] class=02-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D1 D2 D3 current D0 [...] MSI supports 1 message, 64 bit [...] MSI-X supports 4 messages in map 0x20 [...] map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled [...] pcib3: allocated I/O port range (0xc000-0xc0ff) for rid 10 of pci0:3:0:0 [...] map[18]: type Prefetchable Memory, range 64, base 0xda104000, size 12, enabled [...] pcib3: allocated prefetch range (0xda104000-0xda104fff) for rid 18 of pci0:3:0:0 [...] map[20]: type Prefetchable Memory, range 64, base 0xda100000, size 14, enabled [...] pcib3: allocated prefetch range (0xda100000-0xda103fff) for rid 20 of pci0:3:0:0 [...] pcib3: matched entry for 3.0.INTA [...] pcib3: slot 0 INTA hardwired to IRQ 44 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xda104000-0xda104fff,0xda100000-0xda103fff irq 44 at device 0.0 on pci3 [...] re0: MSI count : 1 [...] re0: MSI-X count : 4 [...] re0: attempting to allocate 1 MSI-X vectors (4 supported) [...] msi: routing MSI-X IRQ 62 to local APIC 3 vector 48 [...] re0: using IRQ 62 for MSI-X [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: OUI 0x00e04c, model 0x0011, rev. 5 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: bpf attached [...] re0: Ethernet address: ... [...] pcib4: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pcib0: allocated type 3 (0xfe700000-0xfe7fffff) for rid 20 of pcib4 [...] pcib4: domain 0 [...] pcib4: secondary bus 4 [...] pcib4: subordinate bus 4 [...] pcib4: memory decode 0xfe700000-0xfe7fffff [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib4: allocated bus range (4-4) for rid 0 of pci4 [...] pci4: domain=0, physical bus=4 [...] found-> vendor=0x1b21, dev=0x1042, revid=0x00 [...] domain=0, bus=4, slot=0, func=0 [...] class=0c-03-30, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 8 messages, 64 bit [...] MSI-X supports 8 messages in map 0x10 [...] map[10]: type Memory, range 64, base 0xfe700000, size 15, enabled [...] pcib4: allocated memory range (0xfe700000-0xfe707fff) for rid 10 of pci0:4:0:0 [...] pcib4: matched entry for 4.0.INTA [...] pcib4: slot 0 INTA hardwired to IRQ 46 [...] xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 46 at device 0.0 on pci4 [...] xhci0: 32 bytes context size, 32-bit DMA [...] xhci0: attempting to allocate 1 MSI-X vectors (8 supported) [...] msi: routing MSI-X IRQ 63 to local APIC 4 vector 48 [...] xhci0: using IRQ 63 for MSI-X [...] xhci0: MSI-X enabled [...] usbus0 on xhci0 [...] xhci0: usbpf: Attached [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0 [...] pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib5 [...] pcib0: allocated type 3 (0xfe600000-0xfe6fffff) for rid 20 of pcib5 [...] pcib5: domain 0 [...] pcib5: secondary bus 5 [...] pcib5: subordinate bus 5 [...] pcib5: I/O decode 0xb000-0xbfff [...] pcib5: memory decode 0xfe600000-0xfe6fffff [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib5: allocated bus range (5-5) for rid 0 of pci5 [...] pci5: domain=0, physical bus=5 [...] found-> vendor=0x197b, dev=0x2362, revid=0x10 [...] domain=0, bus=5, slot=0, func=0 [...] class=01-01-85, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=3 [...] powerspec 3 supports D0 D3 current D0 [...] map[10]: type I/O Port, range 32, base 0xb040, size 3, enabled [...] pcib5: allocated I/O port range (0xb040-0xb047) for rid 10 of pci0:5:0:0 [...] map[14]: type I/O Port, range 32, base 0xb030, size 2, enabled [...] pcib5: allocated I/O port range (0xb030-0xb033) for rid 14 of pci0:5:0:0 [...] map[18]: type I/O Port, range 32, base 0xb020, size 3, enabled [...] pcib5: allocated I/O port range (0xb020-0xb027) for rid 18 of pci0:5:0:0 [...] map[1c]: type I/O Port, range 32, base 0xb010, size 2, enabled [...] pcib5: allocated I/O port range (0xb010-0xb013) for rid 1c of pci0:5:0:0 [...] map[20]: type I/O Port, range 32, base 0xb000, size 4, enabled [...] pcib5: allocated I/O port range (0xb000-0xb00f) for rid 20 of pci0:5:0:0 [...] map[24]: type Memory, range 32, base 0xfe610000, size 9, enabled [...] pcib5: allocated memory range (0xfe610000-0xfe6101ff) for rid 24 of pci0:5:0:0 [...] pcib5: matched entry for 5.0.INTA [...] pcib5: slot 0 INTA hardwired to IRQ 51 [...] ahci0: <JMicron JMB362 AHCI SATA controller> port 0xb040-0xb047,0xb030-0xb033,0xb020-0xb027,0xb010-0xb013,0xb000-0xb00f mem 0xfe610000-0xfe6101ff irq 51 at device 0.0 on pci5 [...] ioapic1: routing intpin 27 (PCI IRQ 51) to lapic 5 vector 48 [...] ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported [...] ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 2ports [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich0: Caps: HPCP [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich1: Caps: HPCP [...] pcib6: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 [...] pcib0: allocated type 3 (0xfe500000-0xfe5fffff) for rid 20 of pcib6 [...] pcib6: domain 0 [...] pcib6: secondary bus 6 [...] pcib6: subordinate bus 6 [...] pcib6: memory decode 0xfe500000-0xfe5fffff [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib6: allocated bus range (6-6) for rid 0 of pci6 [...] pci6: domain=0, physical bus=6 [...] found-> vendor=0x1b21, dev=0x1042, revid=0x00 [...] domain=0, bus=6, slot=0, func=0 [...] class=0c-03-30, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=7 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 8 messages, 64 bit [...] MSI-X supports 8 messages in map 0x10 [...] map[10]: type Memory, range 64, base 0xfe500000, size 15, enabled [...] pcib6: allocated memory range (0xfe500000-0xfe507fff) for rid 10 of pci0:6:0:0 [...] pcib6: matched entry for 6.0.INTA [...] pcib6: slot 0 INTA hardwired to IRQ 50 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe500000-0xfe507fff irq 50 at device 0.0 on pci6 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: attempting to allocate 1 MSI-X vectors (8 supported) [...] msi: routing MSI-X IRQ 64 to local APIC 0 vector 54 [...] xhci1: using IRQ 64 for MSI-X [...] xhci1: MSI-X enabled [...] usbus1 on xhci1 [...] xhci1: usbpf: Attached [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0 [...] pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib7 [...] pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib7 [...] pcib7: domain 0 [...] pcib7: secondary bus 7 [...] pcib7: subordinate bus 7 [...] pcib7: I/O decode 0xa000-0xafff [...] pcib7: memory decode 0xfe400000-0xfe4fffff [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib7: allocated bus range (7-7) for rid 0 of pci7 [...] pci7: domain=0, physical bus=7 [...] found-> vendor=0x197b, dev=0x2362, revid=0x10 [...] domain=0, bus=7, slot=0, func=0 [...] class=01-01-85, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=11 [...] powerspec 3 supports D0 D3 current D0 [...] map[10]: type I/O Port, range 32, base 0xa040, size 3, enabled [...] pcib7: allocated I/O port range (0xa040-0xa047) for rid 10 of pci0:7:0:0 [...] map[14]: type I/O Port, range 32, base 0xa030, size 2, enabled [...] pcib7: allocated I/O port range (0xa030-0xa033) for rid 14 of pci0:7:0:0 [...] map[18]: type I/O Port, range 32, base 0xa020, size 3, enabled [...] pcib7: allocated I/O port range (0xa020-0xa027) for rid 18 of pci0:7:0:0 [...] map[1c]: type I/O Port, range 32, base 0xa010, size 2, enabled [...] pcib7: allocated I/O port range (0xa010-0xa013) for rid 1c of pci0:7:0:0 [...] map[20]: type I/O Port, range 32, base 0xa000, size 4, enabled [...] pcib7: allocated I/O port range (0xa000-0xa00f) for rid 20 of pci0:7:0:0 [...] map[24]: type Memory, range 32, base 0xfe410000, size 9, enabled [...] pcib7: allocated memory range (0xfe410000-0xfe4101ff) for rid 24 of pci0:7:0:0 [...] pcib7: matched entry for 7.0.INTA [...] pcib7: slot 0 INTA hardwired to IRQ 47 [...] ahci1: <JMicron JMB362 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xfe410000-0xfe4101ff irq 47 at device 0.0 on pci7 [...] ioapic1: routing intpin 23 (PCI IRQ 47) to lapic 1 vector 50 [...] ahci1: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported [...] ahci1: Caps: 64bit NCQ ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 2ports [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich2: Caps: HPCP [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ahcich3: Caps: HPCP [...] ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe80b000-0xfe80b3ff irq 19 at device 17.0 on pci0 [...] ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 49 [...] ahci2: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahci2: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd eSATA 6ports [...] ahci2: Caps2: [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich4: Caps: ESP [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahcich5: Caps: ESP [...] ahcich6: <AHCI channel> at channel 2 on ahci2 [...] ahcich6: Caps: ESP [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] ahcich7: Caps: ESP [...] ahcich8: <AHCI channel> at channel 4 on ahci2 [...] ahcich8: Caps: ESP [...] ahcich9: <AHCI channel> at channel 5 on ahci2 [...] ahcich9: Caps: ESP [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe80a000-0xfe80afff irq 18 at device 18.0 on pci0 [...] ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 3 vector 49 [...] usbus2 on ohci0 [...] ohci0: usbpf: Attached [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe809000-0xfe8090ff irq 17 at device 18.2 on pci0 [...] ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 4 vector 49 [...] ehci0: Dropped interrupts workaround enabled [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] ehci0: usbpf: Attached [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe808000-0xfe808fff irq 20 at device 19.0 on pci0 [...] ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 5 vector 49 [...] usbus4 on ohci1 [...] ohci1: usbpf: Attached [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe807000-0xfe8070ff irq 21 at device 19.2 on pci0 [...] ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 55 [...] ehci1: Dropped interrupts workaround enabled [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] ehci1: usbpf: Attached [...] usbus5: 480Mbps High Speed USB v2.0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] pcib0: allocated type 4 (0xcd6-0xcd7) for rid 0 of intsmb0 [...] pcib0: allocated type 4 (0xb00-0xb0f) for rid 0 of intsmb0 [...] smbus0: <System Management Bus> on intsmb0 [...] smb0: <SMBus generic I/O> on smbus0 [...] jedec_dimm0: <DDR3 DIMM> at addr 0xa0 on smbus0 [...] 0000 92 13 0b 02 04 21 00 09 0b 11 01 08 0a 00 fc 00 |.....!..........| [...] 0010 69 78 69 30 69 11 18 81 20 08 3c 3c 00 f0 83 01 |ixi0i... .<<....| [...] 0020 80 00 00 00 00 00 00 00 00 84 00 00 00 00 00 00 |................| [...] 0030 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 64 01 |..............d.| [...] 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0070 00 00 00 00 00 01 98 04 14 52 f2 2f f7 21 09 83 |.........R./.!..| [...] 0080 39 39 36 35 35 32 35 2d 31 33 38 2e 41 30 30 4c |9965525-138.A00L| [...] 0090 46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |F ..............| [...] 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 |................| [...] 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] jedec_dimm0: TSOD: ST Microelectronics TSOD [...] jedec_dimm1: <DDR3 DIMM> at addr 0xa2 on smbus0 [...] 0000 92 13 0b 02 04 21 00 09 0b 11 01 08 0a 00 fc 00 |.....!..........| [...] 0010 69 78 69 30 69 11 18 81 20 08 3c 3c 00 f0 83 01 |ixi0i... .<<....| [...] 0020 80 00 00 00 00 00 00 00 00 84 00 00 00 00 00 00 |................| [...] 0030 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 64 01 |..............d.| [...] 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0070 00 00 00 00 00 01 98 04 14 52 f8 2f f2 21 09 83 |.........R./.!..| [...] 0080 39 39 36 35 35 32 35 2d 31 33 38 2e 41 30 30 4c |9965525-138.A00L| [...] 0090 46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |F ..............| [...] 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 |................| [...] 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] jedec_dimm1: TSOD: ST Microelectronics TSOD [...] jedec_dimm2: <DDR3 DIMM> at addr 0xa4 on smbus0 [...] 0000 92 13 0b 02 04 21 00 09 0b 11 01 08 0a 00 fc 00 |.....!..........| [...] 0010 69 78 69 30 69 11 18 81 20 08 3c 3c 00 f0 83 01 |ixi0i... .<<....| [...] 0020 80 00 00 00 00 00 00 00 00 84 00 00 00 00 00 00 |................| [...] 0030 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 64 01 |..............d.| [...] 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0070 00 00 00 00 00 01 98 04 14 52 f3 2f f6 21 09 83 |.........R./.!..| [...] 0080 39 39 36 35 35 32 35 2d 31 33 38 2e 41 30 30 4c |9965525-138.A00L| [...] 0090 46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |F ..............| [...] 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 |................| [...] 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] jedec_dimm2: TSOD: ST Microelectronics TSOD [...] jedec_dimm3: <DDR3 DIMM> at addr 0xa6 on smbus0 [...] 0000 92 11 0b 02 04 21 00 09 0b 52 01 08 0a 00 fc 00 |.....!...R......| [...] 0010 69 78 69 30 69 11 18 81 20 08 3c 3c 00 f0 83 05 |ixi0i... .<<....| [...] 0020 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0030 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 64 01 |..............d.| [...] 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 0070 00 00 00 00 00 01 98 04 14 16 d2 1d 4a 34 40 9e |............J4@.| [...] 0080 39 39 36 35 35 32 35 2d 30 32 34 2e 41 30 30 4c |9965525-024.A00L| [...] 0090 46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |F ..............| [...] 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 |................| [...] 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [...] jedec_dimm3: TSOD: Atmel TSOD [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe800000-0xfe803fff irq 16 at device 20.2 on pci0 [...] hdac1: PCI card vendor: 0x1043, device: 0x8410 [...] hdac1: HDA Driver Revision: 20120126_0002 [...] hdac1: Config options: on=0x00000000 off=0x00000000 [...] ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 51 [...] hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pcib0: allocated type 4 (0x9000-0x9fff) for rid 1c of pcib8 [...] pcib0: allocated type 3 (0xfe300000-0xfe3fffff) for rid 20 of pcib8 [...] pcib8: domain 0 [...] pcib8: secondary bus 8 [...] pcib8: subordinate bus 8 [...] pcib8: I/O decode 0x9000-0x9fff [...] pcib8: memory decode 0xfe300000-0xfe3fffff [...] pcib8: special decode subtractive [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib8: allocated bus range (8-8) for rid 0 of pci8 [...] pci8: domain=0, physical bus=8 [...] found-> vendor=0x1106, dev=0x3044, revid=0xc0 [...] domain=0, bus=8, slot=6, func=0 [...] class=0c-00-10, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) [...] lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) [...] intpin=a, irq=10 [...] powerspec 2 supports D0 D2 D3 current D0 [...] map[10]: type Memory, range 32, base 0xfe300000, size 11, enabled [...] pcib8: allocated memory range (0xfe300000-0xfe3007ff) for rid 10 of pci0:8:6:0 [...] map[14]: type I/O Port, range 32, base 0x9000, size 7, enabled [...] pcib8: allocated I/O port range (0x9000-0x907f) for rid 14 of pci0:8:6:0 [...] pcib8: matched entry for 8.6.INTA [...] pcib8: slot 6 INTA hardwired to IRQ 21 [...] fwohci0: <VIA Fire II (VT6306)> port 0x9000-0x907f mem 0xfe300000-0xfe3007ff irq 21 at device 6.0 on pci8 [...] fwohci0: OHCI version 1.10 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 2 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] dcons_crom0: <dcons configuration ROM> on firewire0 [...] dcons_crom0: bus_addr 0x5665000 [...] sbp0: <SBP-2/SCSI over FireWire> on firewire0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci2 [...] ohci2: usbpf: Attached [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe805000-0xfe805fff irq 22 at device 22.0 on pci0 [...] ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 2 vector 50 [...] usbus7 on ohci3 [...] ohci3: usbpf: Attached [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe804000-0xfe8040ff irq 23 at device 22.2 on pci0 [...] ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 3 vector 50 [...] ehci2: Dropped interrupts workaround enabled [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci2 [...] ehci2: usbpf: Attached [...] usbus8: 480Mbps High Speed USB v2.0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] amdtemp0: Found 6 cores and 1 sensors. [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] atkbd: the current kbd controller command byte 0065 [...] atkbd: keyboard ID 0x41ab (2) [...] kbdc: RESET_KBD return code:00fa [...] kbdc: RESET_KBD status:00aa [...] kbd0 at atkbd0 [...] kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 [...] ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 50 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 5 vector 50 [...] uart0: fast interrupt [...] uart0: PPS capture mode: DCD [...] ivhd0: <AMD-Vi/IOMMU ivhd> on acpi0 [...] ivhd0: Flag:3e<PassPW,ResPassPW,Isoc,IotlbSup,Coherent> [...] ivhd0: Features(type:0x10) HATS = 0 GATS = 0 MsiNumPPR = 0 PNBanks= 0 PNCounters= 0 [...] ivhd0: max PASID = 0 GLXSup = 0 Feature:0 [...] ivhd0: supported paging level:7, will use only: 4 [...] ivhd0: device [0x0 - 0x2] config:0 [...] ivhd0: device [0x10 - 0x10] config:0 [...] ivhd0: device [0x100 - 0x101] config:0 [...] ivhd0: device [0x18 - 0x18] config:0 [...] ivhd0: device [0x200 - 0x200] config:0 [...] ivhd0: device [0x20 - 0x20] config:0 [...] ivhd0: device [0x300 - 0x300] config:0 [...] ivhd0: device [0x28 - 0x28] config:0 [...] ivhd0: device [0x400 - 0x400] config:0 [...] ivhd0: device [0x30 - 0x30] config:0 [...] ivhd0: device [0x500 - 0x500] config:0 [...] ivhd0: device [0x38 - 0x38] config:0 [...] ivhd0: device [0x600 - 0x600] config:0 [...] ivhd0: device [0x50 - 0x50] config:0 [...] ivhd0: device [0x700 - 0x700] config:0 [...] ivhd0: device [0x88 - 0x88] config:0 [...] ivhd0: device [0x90 - 0x92] config:0 [...] ivhd0: device [0x98 - 0x9a] config:0 [...] ivhd0: device [0xa0 - 0xa0] config:d7<INIT,ExtInt,NMI,LINT0,LINT1> [...] ivhd0: device [0xa2 - 0xa2] config:0 [...] ivhd0: device [0xa3 - 0xa3] config:0 [...] ivhd0: device [0xa4 - 0xa4] config:0 [...] ivhd0: device [0x800 - 0x8ff] config:0 [...] ivhd0: device [0xa5 - 0xa5] config:0 [...] ivhd0: device [0xb0 - 0xb2] config:0 [...] ivhd0: PCI cap 0x10b540f@0x40 feature:1<IOTLB> [...] amdiommu0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 65 to local APIC 0 vector 56 [...] amdiommu0: using IRQ 65 for MSI [...] pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xc0000-0xce7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0 [...] pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0 [...] isa_probe_children: disabling PnP devices [...] uart: uart0 already exists; skipping it [...] isa_probe_children: probing non-PnP devices [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] sc0 failed to probe on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 [...] VESA: INT 0x10 vector 0xc000:0x1979 [...] VESA: information block [...] 0000 56 45 53 41 00 03 00 01 00 9a 01 00 00 00 22 00 [...] 0010 00 9a e0 00 28 80 07 01 00 9a 1a 01 00 9a 36 01 [...] 0020 00 9a 00 01 01 01 02 01 03 01 04 01 05 01 06 01 [...] 0030 07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01 [...] 0040 18 01 1a 01 1b 01 30 01 31 01 32 01 33 01 34 01 [...] 0050 35 01 36 01 3d 01 3e 01 4b 01 4c 01 4d 01 60 01 [...] 0060 61 01 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0100 4e 56 49 44 49 41 00 4e 56 49 44 49 41 20 43 6f [...] 0110 72 70 6f 72 61 74 69 6f 6e 00 47 4b 32 30 38 20 [...] 0120 42 6f 61 72 64 20 2d 20 32 31 33 31 5f 30 30 31 [...] 0130 30 5f 33 30 32 00 43 68 69 70 20 52 65 76 20 20 [...] 0140 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [...] VESA: 32 mode(s) found [...] pcib0: allocated type 4 (0xcd6-0xcd7) for rid 0 of amdsbwd0 [...] amdsbwd0: ResetStatus = 0x40000802 [...] amdsbwd0: memory base address = 0xfec000f0 [...] amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0 [...] pcib0: allocated type 3 (0xfec000f0-0xfec000f3) for rid 0 of amdsbwd0 [...] pcib0: allocated type 3 (0xfec000f4-0xfec000f7) for rid 1 of amdsbwd0 [...] isa_probe_children: probing PnP devices [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Device configuration finished. [...] procfs registered [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] enc0: bpf attached [...] lo0: bpf attached [...] Linux ELF exec handler installed [...] tcp_init: net.inet.tcp.tcbhashsize auto tuned to 262144 [...] IPsec: Initialized Security Association Processing. [...] WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed [...] ugen8.1: <ATI EHCI root HUB> at usbus8 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] uhub0 on usbus8 [...] uhub1 on usbus2 [...] uhub2 on usbus1 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus5 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus7 [...] ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to deny, logging disabled [...] AcpiOsExecute: enqueue 6 pending tasks [...] ahcich0: AHCI reset... [...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: Subsystem ID: 0x10438525 [...] hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 [...] hdaa0: Original pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 [...] hdaa0: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 [...] hdaa0: Patched pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA [...] hdaa0: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA [...] hdaa0: 2 associations found: [...] hdaa0: Association 0 (15) out: [...] hdaa0: Pin nid=4 seq=0 [...] hdaa0: Association 1 (15) out: [...] hdaa0: Pin nid=5 seq=0 [...] hdaa0: Tracing association 0 (15) [...] hdaa0: Pin 4 traced to DAC 8 [...] hdaa0: Association 0 (15) trace succeeded [...] hdaa0: Tracing association 1 (15) [...] hdaa0: Pin 5 traced to DAC 9 [...] hdaa0: Association 1 (15) trace succeeded [...] hdaa0: Looking for additional DAC for association 0 (15) [...] hdaa0: Looking for additional DAC for association 1 (15) [...] hdaa0: Tracing input monitor [...] hdaa0: Tracing other input monitors [...] hdaa0: Tracing beeper [...] hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm0: Playback: [...] pcm0: Stream cap: 0x00000005 AC3 PCM [...] pcm0: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz [...] ahcich0: SATA connect timeout time=10000us status=00000000 [...] pcm0: DAC:ahcich0: AHCI reset: device not found [...] 8 [...] ahcich1: AHCI reset... [...] pcm0: [...] pcm0: nid=4 [pin: Digital-out (Jack)] [...] pcm0: + <- nid=8 [audio output] [src: pcm] [...] pcm0: [...] pcm0: Mixer "vol" -> "none": child=0x00000010 [...] pcm0: Mixer "pcm": parent="vol" [...] pcm0: Soft PCM mixer ENABLED [...] pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected) [...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: Playback: [...] pcm1: Stream cap: 0x00000005 AC3 PCM [...] pcm1: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz [...] pcm1: DAC: 9 [...] pcm1: [...] pcm1: nid=5 [pin: Digital-out (Jack)] [...] pcm1: + <- nid=9 [audio output] [src: pcm] [...] pcm1: [...] pcm1: Mixer "vol" -> "none": child=0x00000010 [...] pcm1: Mixer "pcm": parent="vol" [...] pcm1: Soft PCM mixer ENABLED [...] ahcich1: SATA connect timeout time=10000us status=00000000 [...] ahcich1: AHCI reset: device not found [...] ahcich2: AHCI reset... [...] pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected) [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x1b21 XHCI root HUB> at usbus0 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub6 on usbus0 [...] uhub6: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub7 on usbus6 [...] uhub8 on usbus3 [...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ahcich2: SATA connect timeout time=10000us status=00000000 [...] ahcich2: AHCI reset: device not found [...] ahcich3: AHCI reset... [...] ahcich3: SATA connect timeout time=10000us status=00000000 [...] ahcich3: AHCI reset: device not found [...] ahcich4: AHCI reset... [...] ahcich4: SATA connect time=100us status=00000133 [...] ahcich4: AHCI reset: device found [...] ahcich5: AHCI reset... [...] ahcich5: SATA connect time=100us status=00000133 [...] ahcich5: AHCI reset: device found [...] ahcich6: AHCI reset... [...] ahcich6: SATA connect time=100us status=00000133 [...] ahcich6: AHCI reset: device found [...] ahcich7: AHCI reset... [...] ahcich7: SATA connect time=100us status=00000133 [...] ahcich7: AHCI reset: device found [...] ahcich8: AHCI reset... [...] ahcich8: SATA connect timeout time=10000us status=00000000 [...] ahcich8: AHCI reset: device not found [...] ahcich9: AHCI reset... [...] ahcich9: SATA connect timeout time=10000us status=00000000 [...] ahcich9: AHCI reset: device not found [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: Subsystem ID: 0x10438410 [...] hdaa1: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 [...] (probe7:mps0:0:4:0): Down reving Protocol Version from 4 to 0? [...] hdaa1: GPIO0: disabled [...] hdaa1: GPIO1: disabled [...] (probe8:mps0:0:3:0): Down reving Protocol Version from 4 to 0? [...] (probe9:mps0:0:2:0): Down reving Protocol Version from 4 to 0? [...] hdaa1: Original pins configuration: [...] hdaa1: nid 0x as seq device conn jack loc color misc [...] hdaa1: 17 99430140 4 0 SPDIF-out Fixed ATAPI Onboard Unknown 1 [...] hdaa1: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0 [...] hdaa1: 21 01011012 1 2 Line-out Jack 1/8 Rear Black 0 [...] hdaa1: 22 01016011 1 1 Line-out Jack 1/8 Rear Orange 0 [...] hdaa1: 23 01012014 1 4 Line-out Jack 1/8 Rear Grey 0 [...] hdaa1: 24 01a19850 5 0 Mic Jack 1/8 Rear Pink 8 [...] hdaa1: 25 02a19c60 6 0 Mic Jack 1/8 Front Pink 12 [...] hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0 [...] hdaa1: 27 02214c20 2 0 Headphones Jack 1/8 Front Green 12 [...] hdaa1: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: 29 4005e601 0 1 Line-out None Optical 0x00 White 6 [...] hdaa1: 30 01456130 3 0 SPDIF-out Jack Optical Rear Orange 1 [...] hdaa1: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 [...] hdaa1: Patching widget caps nid=29 0x00400400 -> 0x00700400 [...] hdaa1: Patching pin config nid=20 0x01014010 -> 0x0121411f [...] hdaa1: Patching pin config nid=21 0x01011012 -> 0x01011010 [...] hdaa1: Patching pin config nid=22 0x01016011 -> 0x01016000 [...] hdaa1: Patching pin config nid=23 0x01012014 -> 0x01012000 [...] hdaa1: Patched pins configuration: [...] hdaa1: nid 0x as seq device conn jack loc color misc [...] hdaa1: 17 99430140 4 0 SPDIF-out Fixed ATAPI Onboard Unknown 1 [...] hdaa1: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 20 0121411f 1 15 Headphones Jack 1/8 Rear Green 1 [...] hdaa1: 21 01011010 1 0 Line-out Jack 1/8 Rear Black 0 [...] hdaa1: 22 01016000 0 0 Line-out Jack 1/8 Rear Orange 0 DISA [...] hdaa1: 23 01012000 0 0 Line-out Jack 1/8 Rear Grey 0 DISA [...] hdaa1: 24 01a19850 5 0 Mic Jack 1/8 Rear Pink 8 [...] hdaa1: 25 02a19c60 6 0 Mic Jack 1/8 Front Pink 12 [...] hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0 [...] hdaa1: 27 02214c20 2 0 Headphones Jack 1/8 Front Green 12 [...] hdaa1: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 30 01456130 3 0 SPDIF-out Jack Optical Rear Orange 1 [...] hdaa1: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA [...] hdaa1: 6 associations found: [...] hdaa1: Association 0 (1) out: [...] hdaa1: Pin nid=21 seq=0 [...] hdaa1: Pin nid=20 seq=15 [...] hdaa1: Association 1 (2) out: [...] hdaa1: Pin nid=27 seq=0 [...] hdaa1: Association 2 (3) out: [...] hdaa1: Pin nid=30 seq=0 [...] hdaa1: Association 3 (4) out: [...] hdaa1: Pin nid=17 seq=0 [...] hdaa1: Association 4 (5) in: [...] hdaa1: Pin nid=24 seq=0 [...] hdaa1: Pin nid=26 seq=15 [...] hdaa1: Association 5 (6) in: [...] hdaa1: Pin nid=25 seq=0 [...] hdaa1: Tracing association 0 (1) [...] hdaa1: Pin 21 traced to DAC 3 [...] hdaa1: Unable to trace pin 20 seq 15 with min nid 0 and hpredir 0 [...] hdaa1: Unable to trace pin 21 seq 0 with min nid 4 [...] hdaa1: Pin 21 traced to DAC 3 with fake redirection [...] hdaa1: Pin 20 traced to DAC 2 with fake redirection [...] hdaa1: Association 0 (1) trace succeeded [...] hdaa1: Tracing association 1 (2) [...] hdaa1: Pin 27 traced to DAC 4 [...] hdaa1: Association 1 (2) trace succeeded [...] hdaa1: Tracing association 2 (3) [...] hdaa1: Pin 30 traced to DAC 6 [...] hdaa1: Association 2 (3) trace succeeded [...] hdaa1: Tracing association 3 (4) [...] hdaa1: Pin 17 traced to DAC 16 [...] hdaa1: Association 3 (4) trace succeeded [...] hdaa1: Tracing association 4 (5) [...] hdaa1: Pin 24 traced to ADC 8 [...] hdaa1: Pin 26 traced to ADC 8 [...] hdaa1: Association 4 (5) trace succeeded [...] hdaa1: Tracing association 5 (6) [...] hdaa1: Pin 25 traced to ADC 9 [...] hdaa1: Association 5 (6) trace succeeded [...] hdaa1: Looking for additional DAC for association 0 (1) [...] hdaa1: Looking for additional DAC for association 1 (2) [...] hdaa1: Looking for additional DAC for association 2 (3) [...] hdaa1: Looking for additional DAC for association 3 (4) [...] hdaa1: Looking for additional ADC for association 4 (5) [...] hdaa1: Looking for additional ADC for association 5 (6) [...] hdaa1: Tracing input monitor [...] hdaa1: Tracing nid 11 to out [...] hdaa1: nid 11 is input monitor [...] hdaa1: Tracing nid 34 to out [...] hdaa1: Tracing nid 35 to out [...] hdaa1: Tracing other input monitors [...] hdaa1: Tracing nid 24 to out [...] hdaa1: Tracing nid 25 to out [...] hdaa1: Tracing nid 26 to out [...] hdaa1: Tracing beeper [...] hdaa1: No presence detection support at nid 20 [...] hdaa1: Pin sense: nid=24 sense=0x80000000 (connected) [...] hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] pcm2: <Realtek ALC892 (Rear Analog 2.0+HP/2.0)> at nid 21,20 and 24,26 on hdaa1 [...] pcm2: Playback: [...] pcm2: Stream cap: 0x00000001 PCM [...] pcm2: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm2: DAC: 3 2 [...] pcm2: [...] pcm2: nid=21 [pin: Line-out (Black Jack)] [...] pcm2: + <- nid=13 [audio mixer] [src: pcm, mix] [...] pcm2: + <- nid=3 [audio output] [src: pcm] [...] pcm2: + <- nid=11 [audio mixer] [src: mix] [...] pcm2: [...] pcm2: nid=20 [pin: Headphones (Green Jack)] [...] pcm2: + <- nid=12 [audio mixer] [src: pcm, mix] [...] pcm2: + <- nid=2 [audio output] [src: pcm] [...] pcm2: + <- nid=11 [audio mixer] [src: mix] [...] pcm2: [...] pcm2: Record: [...] pcm2: Stream cap: 0x00000001 PCM [...] pcm2: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm2: ADC: 8 [...] pcm2: [...] pcm2: nid=8 [audio input] [...] pcm2: + <- nid=35 [audio mixer] [src: speaker, line, mic, mix] [...] pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic] [...] pcm2: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line] [...] pcm2: + <- nid=29 [beep widget] [src: speaker] [...] pcm2: + <- nid=11 [audio mixer] [src: mix] [...] pcm2: [...] pcm2: Input Mix: [...] pcm2: [...] pcm2: nid=11 [audio mixer] [...] pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic] [...] pcm2: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line] [...] pcm2: + <- nid=29 [beep widget] [src: speaker] [...] pcm2: [...] pcm2: Master Volume (OSS: vol): -64/0dB [...] pcm2: +- ctl 1 (nid 2 out): -64/0dB (65 steps) [...] pcm2: +- ctl 2 (nid 3 out): -64/0dB (65 steps) [...] pcm2: +- ctl 17 (nid 12 in 0): mute [...] pcm2: +- ctl 18 (nid 12 in 1): mute [...] pcm2: +- ctl 19 (nid 13 in 0): mute [...] pcm2: +- ctl 20 (nid 13 in 1): mute [...] pcm2: +- ctl 25 (nid 20 in ): mute [...] pcm2: +- ctl 26 (nid 21 in ): mute [...] pcm2: [...] pcm2: PCM Volume (OSS: pcm): -64/0dB [...] pcm2: +- ctl 1 (nid 2 out): -64/0dB (65 steps) [...] pcm2: +- ctl 2 (nid 3 out): -64/0dB (65 steps) [...] pcm2: +- ctl 17 (nid 12 in 0): mute [...] pcm2: +- ctl 19 (nid 13 in 0): mute [...] pcm2: [...] pcm2: Microphone Volume (OSS: mic): 0/30dB [...] pcm2: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 30 (nid 24 out): 0/30dB (4 steps) [...] pcm2: +- ctl 49 (nid 35 in 0): mute [...] pcm2: [...] pcm2: Line-in Volume (OSS: line): 0/30dB [...] pcm2: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 34 (nid 26 out): 0/30dB (4 steps) [...] pcm2: +- ctl 51 (nid 35 in 2): mute [...] pcm2: [...] pcm2: Speaker/Beep Volume (OSS: speaker): -34/12dB [...] pcm2: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 54 (nid 35 in 5): mute [...] pcm2: [...] pcm2: Recording Level (OSS: rec): -16/30dB [...] pcm2: +- ctl 5 (nid 8 in 0): -16/30dB (47 steps) + mute [...] pcm2: +- ctl 49 (nid 35 in 0): mute [...] pcm2: +- ctl 51 (nid 35 in 2): mute [...] pcm2: +- ctl 54 (nid 35 in 5): mute [...] pcm2: +- ctl 59 (nid 35 in 10): mute [...] pcm2: [...] pcm2: Input Mix Level (OSS: mix): -34/12dB [...] pcm2: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute [...] pcm2: +- ctl 18 (nid 12 in 1): mute [...] pcm2: +- ctl 20 (nid 13 in 1): mute [...] pcm2: +- ctl 59 (nid 35 in 10): mute [...] pcm2: [...] pcm2: Input Monitoring Level (OSS: igain): 0/0dB [...] pcm2: +- ctl 18 (nid 12 in 1): mute [...] pcm2: +- ctl 20 (nid 13 in 1): mute [...] pcm2: [...] pcm2: Mixer "vol": [...] pcm2: Mixer "pcm": [...] pcm2: Mixer "speaker": [...] pcm2: Mixer "line": [...] pcm2: Mixer "mic": [...] pcm2: Mixer "mix": [...] pcm2: Mixer "rec": [...] pcm2: Mixer "igain": [...] pcm2: Mixer "ogain": [...] pcm2: Playback channel set is: Front Left, Front Right, [...] pcm2: Playback channel matrix is: 2.0 (unknown) [...] pcm2: Automatically set rec source to: mic [...] pcm2: Recording channel set is: Front Left, Front Right, [...] pcm2: Recording channel matrix is: 2.0 (connected) [...] pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: Playback: [...] pcm3: Stream cap: 0x00000001 PCM [...] pcm3: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm3: DAC: 4 [...] pcm3: [...] pcm3: nid=27 [pin: Headphones (Green Jack)] [...] pcm3: + <- nid=14 [audio mixer] [src: pcm, mix] [...] pcm3: + <- nid=4 [audio output] [src: pcm] [...] pcm3: + <- nid=11 [audio mixer] [src: mix] [...] pcm3: [...] pcm3: Record: [...] pcm3: Stream cap: 0x00000001 PCM [...] pcm3: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz [...] pcm3: ADC: 9 [...] pcm3: [...] pcm3: nid=9 [audio input] [...] pcm3: + <- nid=34 [audio mixer] [src: speaker, monitor] [...] pcm3: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor] [...] pcm3: + <- nid=29 [beep widget] [src: speaker] [...] pcm3: [...] pcm3: Master Volume (OSS: vol): -64/0dB [...] pcm3: +- ctl 3 (nid 4 out): -64/0dB (65 steps) [...] pcm3: +- ctl 21 (nid 14 in 0): mute [...] pcm3: +- ctl 22 (nid 14 in 1): mute [...] pcm3: +- ctl 35 (nid 27 in ): mute [...] pcm3: [...] pcm3: PCM Volume (OSS: pcm): -64/0dB [...] pcm3: +- ctl 3 (nid 4 out): -64/0dB (65 steps) [...] pcm3: +- ctl 21 (nid 14 in 0): mute [...] pcm3: [...] pcm3: Microphone2 Volume (OSS: monitor): 0/30dB [...] pcm3: +- ctl 32 (nid 25 out): 0/30dB (4 steps) [...] pcm3: +- ctl 38 (nid 34 in 1): mute [...] pcm3: [...] pcm3: Speaker/Beep Volume (OSS: speaker) [...] pcm3: +- ctl 42 (nid 34 in 5): mute [...] pcm3: [...] pcm3: Recording Level (OSS: rec): -16/30dB [...] pcm3: +- ctl 6 (nid 9 in 0): -16/30dB (47 steps) + mute [...] pcm3: +- ctl 32 (nid 25 out): 0/30dB (4 steps) [...] pcm3: +- ctl 38 (nid 34 in 1): mute [...] pcm3: +- ctl 42 (nid 34 in 5): mute [...] pcm3: [...] pcm3: Input Mix Level (OSS: mix) [...] pcm3: +- ctl 22 (nid 14 in 1): mute [...] pcm3: [...] pcm3: Input Monitoring Level (OSS: igain): 0/0dB [...] pcm3: +- ctl 22 (nid 14 in 1): mute [...] pcm3: [...] pcm3: Mixer "vol": [...] pcm3: Mixer "pcm": [...] pcm3: Mixer "rec": [...] pcm3: Mixer "igain": [...] pcm3: Mixer "ogain": [...] pcm3: Mixer "monitor": [...] pcm3: Playback channel set is: Front Left, Front Right, [...] pcm3: Playback channel matrix is: 2.0 (disconnected) [...] pcm3: Recording channel set is: Front Left, Front Right, [...] pcm3: Recording channel matrix is: 2.0 (disconnected) [...] pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] pcm4: Playback: [...] pcm4: Stream cap: 0x00000005 AC3 PCM [...] pcm4: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz [...] pcm4: DAC: 6 [...] pcm4: [...] pcm4: nid=30 [pin: SPDIF-out (Orange Jack)] [...] pcm4: + <- nid=6 [audio output] [src: pcm] [...] pcm4: [...] pcm4: Mixer "vol" -> "none": child=0x00000010 [...] pcm4: Mixer "pcm": parent="vol" [...] pcm4: Soft PCM mixer ENABLED [...] pcm4: Playback channel set is: Front Left, Front Right, [...] pcm4: Playback channel matrix is: 2.0 (unknown) [...] pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] pcm5: Playback: [...] pcm5: Stream cap: 0x00000005 AC3 PCM [...] pcm5: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz [...] pcm5: DAC: 16 [...] pcm5: [...] pcm5: nid=17 [pin: SPDIF-out (Fixed)] [...] pcm5: + <- nid=16 [audio output] [src: pcm] [...] pcm5: [...] pcm5: Mixer "vol" -> "none": child=0x00000010 [...] pcm5: Mixer "pcm": parent="vol" [...] pcm5: Soft PCM mixer ENABLED [...] pcm5: Playback channel set is: Front Left, Front Right, [...] pcm5: Playback channel matrix is: 2.0 (unknown) [...] hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> K8/16/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA> [...] WARNING: WITNESS option enabled, expect reduced performance. [...] ahcich4: AHCI reset: device ready after 100ms [...] Trying to mount root from zfs:rpool/ROOT/2021-11-27 []... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8 [...] ahcich5: AHCI reset: device ready after 100ms [...] ahcich6: AHCI reset: device ready after 100ms [...] ahcich7: AHCI reset: device ready after 100ms [...] uhub7: 2 ports with 2 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus5 usbus8 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub8: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus5 [...] ugen2.2: <Logitech USB Laser Mouse> at usbus2 [...] ugen4.2: <QinHeng Electronics USB2.0-Ser> at usbus4 [...] pass0 at mps0 bus 0 scbus0 target 2 lun 0 [...] pass0: <ATA ST3500418AS CC49> Fixed Direct Access SPC-4 SCSI device [...] pass0: Serial Number... [...] pass0: 300.000MB/s transfers [...] pass0: Command Queueing enabled [...] pass1 at mps0 bus 0 scbus0 target 3 lun 0 [...] pass1: <ATA ST3500312CS SS16> Fixed Direct Access SPC-4 SCSI device [...] pass1: Serial Number... [...] pass1: 300.000MB/s transfers [...] pass1: Command Queueing enabled [...] pass2 at mps0 bus 0 scbus0 target 4 lun 0 [...] pass2: <ATA WDC WD5000AAKS-0 3B01> Fixed Direct Access SPC-4 SCSI device [...] pass2: Serial Number... [...] pass2: 300.000MB/s transfers [...] pass2: Command Queueing enabled [...] pass3 at ahcich4 bus 0 scbus5 target 0 lun 0 [...] pass3: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] pass3: Serial Number... [...] pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] pass3: Command Queueing enabled [...] pass4 at ahcich5 bus 0 scbus6 target 0 lun 0 [...] pass4: <SSDPR-CX400-256-G2 H190117D> ACS-2 ATA SATA 3.x device [...] pass4: Serial Number... [...] pass4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] pass4: Command Queueing enabled [...] pass5 at ahcich6 bus 0 scbus7 target 0 lun 0 [...] pass5: <HGST HUS724030ALA640 MF8OAA70> ATA8-ACS SATA 3.x device [...] pass5: Serial Number... [...] pass5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] pass5: Command Queueing enabled [...] pass6 at ahcich7 bus 0 scbus8 target 0 lun 0 [...] pass6: <Hitachi HUA723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device [...] pass6: Serial Number... [...] pass6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] pass6: Command Queueing enabled [...] ada0 at ahcich4 bus 0 scbus5 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] GEOM: new disk ada0 [...] ada1 at ahcich5 bus 0 scbus6 target 0 lun 0 [...] ada1: <SSDPR-CX400-256-G2 H190117D> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 244198MB (500118192 512 byte sectors) [...] ada2 at ahcich6 bus 0 scbus7 target 0 lun 0 [...] ada2: <HGST HUS724030ALA640 MF8OAA70> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 2861588MB (5860533168 512 byte sectors) [...] ada3 at ahcich7 bus 0 scbus8 target 0 lun 0 [...] ada3: <Hitachi HUA723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 2861588MB (5860533168 512 byte sectors) [...] GEOM: new disk ada1 [...] GEOM: new disk ada2 [...] GEOM: new disk ada3 [...] GEOM: new disk da0 [...] GEOM: new disk da1 [...] GEOM: new disk da2 [...] da2 at mps0 bus 0 scbus0 target 4 lun 0 [...] da2: <ATA WDC WD5000AAKS-0 3B01> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 300.000MB/s transfers [...] da2: Command Queueing enabled [...] da2: 476940MB (976773168 512 byte sectors) [...] ugen2.3: <American Power Conversion Smart-UPS 1500 FW:653.19.I USB FW:11.03> at usbus2 [...] da2: Delete methods: <NONE(*),ZERO> [...] da1 at mps0 bus 0 scbus0 target 3 lun 0 [...] da1: <ATA ST3500312CS SS16> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 300.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 476940MB (976773168 512 byte sectors) [...] da1: Delete methods: <NONE(*),ZERO> [...] da0 at mps0 bus 0 scbus0 target 2 lun 0 [...] da0: <ATA ST3500418AS CC49> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 300.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 476940MB (976773168 512 byte sectors) [...] da0: Delete methods: <NONE(*),ZERO> [...] GEOM_MIRROR: Device mirror/swap launched (2/2). [...] atrtc0: providing initial system time [...] start_init: trying /sbin/init [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] bridge0: Ethernet address: ... [...] tap0: Ethernet address: ... [...] tap1: Ethernet address: ... [...] tap2: Ethernet address: ... [...] re0: changing name to 'neti' [...] neti: promiscuous mode enabled [...] tap0: promiscuous mode enabled [...] tap1: promiscuous mode enabled [...] tap2: promiscuous mode enabled [...] ums0 on uhub1 [...] ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/56.01, addr 2> on usbus2 [...] ums0: 8 buttons and [XYZT] coordinates ID=0 [...] uchcom0 on uhub4 [...] uchcom0: <QinHeng Electronics USB2.0-Ser, rev 1.10/2.54, addr 2> on usbus4 [...] uchcom0: CH340 detected [...] lock order reversal: [...] 1st 0xfffff8004cc18070 zfs (zfs, lockmgr) @ /usr/devel/git/trant/sys/kern/vfs_mount.c:1065 [...] 2nd 0xfffff8004cc1adc8 devfs (devfs, lockmgr) @ /usr/devel/git/trant/sys/kern/vfs_mount.c:1077 [...] lock order devfs -> zfs established at: [...] #0 0xffffffff808ce536 at witness_lock_order_add+0xf6 [...] #1 0xffffffff808cd9e8 at witness_checkorder+0x298 [...] #2 0xffffffff80842f82 at lockmgr_xlock+0x52 [...] #3 0xffffffff80925f5b at vop_lock+0x6b [...] #4 0xffffffff80bdf171 at VOP_LOCK1_APV+0x81 [...] #5 0xffffffff8094d3cb at VOP_LOCK1+0x2b [...] #6 0xffffffff8094be77 at _vn_lock+0x37 [...] #7 0xffffffff80930e84 at vfs_domount_first+0x534 [...] #8 0xffffffff8092e082 at vfs_domount+0x2a2 [...] #9 0xffffffff8092ccb9 at vfs_donmount+0x209 [...] #10 0xffffffff80930164 at kernel_mount+0x54 [...] #11 0xffffffff80933152 at parse_mount+0x242 [...] #12 0xffffffff80932263 at vfs_mountroot_parse+0xe3 [...] #13 0xffffffff80931d73 at vfs_mountroot+0x2b3 [...] #14 0xffffffff80806932 at start_init+0x22 [...] #15 0xffffffff8082d96c at fork_exit+0xcc [...] #16 0xffffffff80b377ee at fork_trampoline+0xe [...] lock order zfs -> devfs attempted at: [...] #0 0xffffffff808ce068 at witness_checkorder+0x918 [...] #1 0xffffffff80842f82 at lockmgr_xlock+0x52 [...] #2 0xffffffff80925f5b at vop_lock+0x6b [...] #3 0xffffffff80bdf171 at VOP_LOCK1_APV+0x81 [...] #4 0xffffffff8094d3cb at VOP_LOCK1+0x2b [...] #5 0xffffffff8094be77 at _vn_lock+0x37 [...] #6 0xffffffff80930e84 at vfs_domount_first+0x534 [...] #7 0xffffffff8092e082 at vfs_domount+0x2a2 [...] #8 0xffffffff8092ccb9 at vfs_donmount+0x209 [...] #9 0xffffffff8092ca74 at sys_nmount+0x104 [...] #10 0xffffffff80b5b863 at syscallenter+0x163 [...] #11 0xffffffff80b5b535 at amd64_syscall+0x15 [...] #12 0xffffffff80b3708b at fast_syscall_common+0xf8 [...] GEOM_ELI: Device zvol/pond/usr/home/XXXXXXXXXXXXX created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] pid 98502 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 11 [...] pid 98505 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 11 [...] pid 56794 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 11 [...] pid 62804 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 11 [...] pid 6907 (vpnc), tun0: tun/tap protocol violation, non-controlling process closed last. [...] pid 50197 (kscreenlocker_greet), jid 0, uid 1001: exited on signal 11 [...] witness_lock_list_get: witness exhausted