[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33338384384 (31793 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] Launching APs: 2 5 3 7 1 6 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcea78000-0xcea7801e [...] smbios0: Version: 2.6, BCD Revision: 2.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092008); [...] bce0: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092008); [...] bce1: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] mfi0: <Dell PERC H700 Integrated> port 0xfc00-0xfcff mem 0xdf1bc000-0xdf1bffff,0xdf1c0000-0xdf1fffff irq 32 at device 0.0 on pci2 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 1008, limiting to 128 [...] mfi0: 15787 (749897709s/0x0020/info) - Shutdown command received from host [...] mfi0: 15788 (boot + 33s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/1f17/1028) [...] mfi0: 15789 (boot + 33s/0x0020/info) - Firmware version 2.100.03-4651 [...] mfi0: 15790 (boot + 35s/0x0008/info) - Battery Present [...] mfi0: 15791 (boot + 35s/0x0020/info) - Package version 12.10.7-0001 [...] mfi0: 15792 (boot + 35s/0x0020/info) - Board Revision A06 [...] mfi0: 15793 (boot + 62s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] mfi0: 15794 (boot + 62s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 15795 (boot + 62s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090d946cd00,0000000000000000 [...] mfi0: 15796 (boot + 62s/0x0002/info) - Inserted: PD 0c(e0x20/s12) [...] mfi0: 15797 (boot + 62s/0x0002/info) - Inserted: PD 0c(e0x20/s12) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789pcib3: <ACPI PCI-PCI bridge>abe1,0000000000000000 [...] mfi0: 15798 (boot + 62s/0x0002/WARN) - PD 0c(e0x20/s12) is not a certified drive [...] mfi0: 15799 (boot + 62s/0x0002/info) - Inserted: PD 0d(e0x20/s13) [...] mfi0: 15800 (boot + 62s/0x0002/info) - Inserted: PD 0d(e0x20/s13) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789abe0,0000000000000000 [...] at device 7.0 on pci0 [...] pci3: <ACPI PCI bus>mfi0: 15801 (boot + 62s/0x0002/WARN) - PD 0d(e0x20/s13) is not a certified drive [...] on pcib3 [...] mfi0: 15802 (boot + 62s/0x0002/info) - Inserted: PD f5(e0x00/s0) [...] mfi0: 15803 (boot + 62s/0x0002/info) - Inserted: PD f5(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500065b36789abfd,0000000000000000 [...] mfi0: 15804 (749897848s/0x0020/info) - Time established as 10/06/23 8:57:28; (65 seconds since power on) [...] mfi0: 15805 (749897883s/0x0008/info) - Battery temperature is normal [...] mfi0: 15806 (749897883s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 15807 (749897883s/0x0008/info) - Battery started charging [...] mfi0: 15808 (749901718s/0x0008/info) - Battery charge complete [...] mfi0: 15809 (749962800s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD [...] mfi0: 15810 (boot + 33s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/1f17/1028) [...] pcib4: <ACPI PCI-PCI bridge>mfi0: 15811 (boot + 33s/0x0020/info) - Firmware version 2.100.03-4651 [...] mfi0: 15812 (boot + 35s/0x0008/info) - Battery Present [...] mfi0: 15813 (boot + 35s/0x0020/info) - Package version 12.10.7-0001 [...] mfi0: 15814 (boot + 35s/0x0020/info) - Board Revision A06 [...] mfi0: 15815 (boot + 61s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5948f090d946cd00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00 [...] at device 9.0 on pci0 [...] pci4: <ACPI PCI bus>mfi0: 15816 (boot + 63s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] on pcib4 [...] mfi0: 15817 (boot + 63s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 15818 (boot + 63s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090d946cd00,0000000000000000 [...] mfi0: 15819 (boot + 63s/0x0002/info) - Inserted: PD 0c(e0x20/s12) [...] mfi0: 15820 (boot + 63s/0x0002/info) - Inserted: PD 0c(e0x20/s12) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789abe1,0000000000000000 [...] mfi0: 15821 (boot + 63s/0x0002/WARN) - PD 0c(e0x20/s12) is not a certified drive [...] mfi0: 15822 (boot + 63s/0x0002/info) - Inserted: PD 0d(e0x20/s13) [...] mfi0: 15823 (boot + 63s/0x0002/info) - Inserted: PD 0d(e0x20/s13) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789abe0,0000000000000000 [...] mfi0: 15824 (boot + 63s/0x0002/WARN) - PD 0d(e0x20/s13) is not a certified drive [...] mfi0: 15825 (boot + 63s/0x0002/info) - Inserted: PD f5(e0x00/s0) [...] mfi0: 15826 (boot + 63s/0x0002/info) - Inserted: PD f5(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500065b36789abfd,0000000000000000 [...] pcib5: <ACPI PCI-PCI bridge>mfi0: 15827 (boot + 64s/0x0020/info) - Cache data recovered successfully [...] mfi0: 15828 (750085714s/0x0020/info) - Time established as 10/08/23 13:08:34; (65 seconds since power on) [...] mfi0: 15829 (750085749s/0x0008/info) - Battery temperature is normal [...] mfi0: 15830 (750085749s/0x0008/info) - Current capacity of the battery is above threshold [...] at device 10.0 on pci0 [...] pci5: <ACPI PCI bus>mfi0: 15831 (750085749s/0x0008/info) - Battery started charging [...] mfi0: 15832 (750086984s/0x0008/info) - Battery charge complete [...] mfi0: 15833 (750567600s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an activ on pcib5 [...] e process, or are in an excluded VD [...] mfi0: 15834 (751172400s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD [...] mfi0: 15835 (boot + 33s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/1f17/1028) [...] mfi0: 15836 (boot + 33s/0x0020/info) - Firmware version 2.100.03-4651 [...] mfi0: 15837 (boot + 35s/0x0008/info) - Battery Present [...] mfi0: 15838 (boot + 35s/0x0020/info) - Package version 12.10.7-0001 [...] mfi0: 15839 (boot + 35s/0x0020/info) - Board Revision A06 [...] mfi0: 15840 (boot + 61s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5948f090d946cd00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00 [...] mfi0: 15841 (boot + 63s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] mfi0: 15842 (boot + 63s/0x0002/info) - Inserted: Encl PD 20 [...] pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) [...] mfi0: 15843 (boot + 63s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090d946cd00,0000000000000000 [...] mfi0: 15844 (boot + 63s/0x0002/info) - Inserted: PD 0c(e0x20/s12) [...] mfi0: 15845 (boot + 63s/0x0002/info) - Inserted: PD 0c(e0x20/s12) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789abe1,0000000000000000 [...] mfi0: 15846 (boot + 63s/0x0002/WARN) - PD 0c(e0x20/s12) is not a certified drive [...] mfi0: 15847 (boot + 63s/0x0002/info) - Inserted: PD 0d(e0x20/s13) [...] pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) [...] mfi0: 15848 (boot + 63s/0x0002/info) - Inserted: PD 0d(e0x20/s13) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=500065b36789abe0,0000000000000000 [...] mfi0: 15849 (boot + 63s/0x0002/WARN) - PD 0d(e0x20/s13) is not a certified drive [...] mfi0: 15850 (boot + 63s/0x0002/info) - Inserted: PD f5(e0x00/s0) [...] mfi0: 15851 (boot + 63s/0x0002/info) - Inserted: PD f5(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500065b36789abfd,0000000000000000 [...] mfi0: 15852 (boot + 64s/0x0020/info) - Cache data recovered successfully [...] mfi0: 15853 (751280361s/0x0020/info) - Time established as 10/22/23 8:59:21; (65 seconds since power on) [...] pci0: <base peripheral, interrupt controller>mfi0: 15854 (751280396s/0x0008/info) - Battery temperature is normal [...] mfi0: 15855 (751280396s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 15856 (751280396s/0x0008/info) - Battery started charging [...] at device 20.2 (no driver attached) [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xec40-0xec5f irq 17 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xec60-0xec7f irq 18 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-A> port 0xec80-0xec9f irq 21 at device 29.0 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-B> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-C> port 0xecc0-0xecdf irq 21 at device 29.2 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-F> port 0xece0-0xecff irq 20 at device 29.3 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci6 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcbfff,0xcc000-0xd1fff,0xd2000-0xd2fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 13 [...] device_attach: est7 attach returned 6 [...] Timecounter "TSC-low" frequency 1200042475 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0 on usbus6 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub1 on usbus7 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub2 on usbus4 [...] uhub3 on usbus5 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub4 on usbus3 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus2 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub6 on usbus0 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub7 on usbus1 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] mfid0 on mfi0 [...] mfid0: 237952MB (487325696 sectors) RAID volume 'Samsung' is optimal [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus2 usbus7 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] ugen2.2: <vendor 0x0424 product 0x2514> at usbus2 [...] uhub8 on uhub5 [...] uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub8: MTT enabled [...] Root mount waiting for: usbus2 usbus7 [...] uhub8: 4 ports with 4 removable, self powered [...] ugen3.2: <Avocent USB Composite Device-0> at usbus3 [...] ukbd0 on uhub4 [...] ukbd0: <Keyboard> on usbus3 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] Root mount waiting for: usbus7 [...] ugen7.2: <Avocent USB Composite Device-1> at usbus7 [...] umass0 on uhub1 [...] umass0: <SCSI Transparent Interface 0> on usbus7 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:0:0: Attached to scbus0 [...] umass1 on uhub1 [...] umass1: <SCSI Transparent Interface 1> on usbus7 [...] umass1: SCSI over Bulk-Only; quirks = 0x4101 [...] umass1:1:1: Attached to scbus1 [...] cd0 at umass-sim1 bus 1 scbus1 target 0 lun 0 [...] cd0: <iDRAC Virtual CD 0323> Removable CD-ROM SCSI device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <iDRAC LCDRIVE 0323> Removable Direct Access SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da0: Write Protected