[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8168796160 (7790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] Event timer "HPET7" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf600000-0xdf60ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf614000-0xdf615fff,0xdf618000-0xdf6180ff,0xdf617000-0xdf6177ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] em1: EEPROM V1.10-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] em2: EEPROM V1.10-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] em3: EEPROM V1.10-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] em4: EEPROM V1.10-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] em5: EEPROM V1.10-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] Timecounter "TSC-low" frequency 1200000671 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for:ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] usbus0 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Protectli 120GB mSATA SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] Dual Console: Video Primary, Serial Secondary [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf616000-0xdf6160ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub0 [...] uhid0: <USB Keyboard> on usbus0 [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em3: link state changed to DOWN [...] em4: link state changed to DOWN [...] em5: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] lo0: link state changed to UP [...] em1: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] em3: link state changed to DOWN [...] em0: link state changed to UP [...] lagg0: link state changed to UP [...] em4: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan02' [...] vlan2: changing name to 'vlan03' [...] vlan3: changing name to 'vlan04' [...] vlan4: changing name to 'vlan05' [...] vlan5: changing name to 'vlan06' [...] vlan6: changing name to 'vlan07' [...] vlan7: changing name to 'vlan08' [...] vlan8: changing name to 'vlan09' [...] vlan9: changing name to 'vlan010' [...] vlan10: changing name to 'vlan011' [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 5 2 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8168796160 (7790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] Event timer "HPET7" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf600000-0xdf60ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf614000-0xdf615fff,0xdf618000-0xdf6180ff,0xdf617000-0xdf6177ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] em1: EEPROM V1.10-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] em2: EEPROM V1.10-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] em3: EEPROM V1.10-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] em4: EEPROM V1.10-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] em5: EEPROM V1.10-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] Timecounter "TSC-low" frequency 1200000613 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for:ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] usbus0 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Protectli 120GB mSATA SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] Dual Console: Video Primary, Serial Secondary [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf616000-0xdf6160ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub0 [...] uhid0: <USB Keyboard> on usbus0 [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] em3: link state changed to DOWN [...] em4: link state changed to DOWN [...] em5: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan010' [...] vlan2: changing name to 'vlan011' [...] vlan3: changing name to 'vlan02' [...] vlan4: changing name to 'vlan03' [...] vlan5: changing name to 'vlan04' [...] vlan6: changing name to 'vlan05' [...] vlan7: changing name to 'vlan06' [...] vlan8: changing name to 'vlan07' [...] vlan9: changing name to 'vlan08' [...] vlan10: changing name to 'vlan09' [...] em0: link state changed to UP [...] lagg0: link state changed to UP [...] vlan04: link state changed to UP [...] vlan05: link state changed to UP [...] vlan06: link state changed to UP [...] vlan07: link state changed to UP [...] vlan01: link state changed to UP [...] vlan02: link state changed to UP [...] vlan03: link state changed to UP [...] vlan010: link state changed to UP [...] vlan09: link state changed to UP [...] vlan011: link state changed to UP [...] vlan08: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] em1: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8168796160 (7790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] Event timer "HPET7" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf600000-0xdf60ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf614000-0xdf615fff,0xdf618000-0xdf6180ff,0xdf617000-0xdf6177ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] em1: EEPROM V1.10-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] em2: EEPROM V1.10-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] em3: EEPROM V1.10-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] em4: EEPROM V1.10-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] em5: EEPROM V1.10-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] Timecounter "TSC-low" frequency 1200000530 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for:ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] usbus0 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Protectli 120GB mSATA SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] Dual Console: Video Primary, Serial Secondary [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf616000-0xdf6160ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub0 [...] uhid0: <USB Keyboard> on usbus0 [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] em3: link state changed to DOWN [...] em4: link state changed to DOWN [...] em5: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan010' [...] vlan2: changing name to 'vlan011' [...] vlan3: changing name to 'vlan02' [...] vlan4: changing name to 'vlan03' [...] vlan5: changing name to 'vlan04' [...] vlan6: changing name to 'vlan05' [...] vlan7: changing name to 'vlan06' [...] vlan8: changing name to 'vlan07' [...] vlan9: changing name to 'vlan08' [...] vlan10: changing name to 'vlan09' [...] em0: link state changed to UP [...] lagg0: link state changed to UP [...] vlan04: link state changed to UP [...] vlan05: link state changed to UP [...] vlan06: link state changed to UP [...] vlan07: link state changed to UP [...] vlan01: link state changed to UP [...] vlan02: link state changed to UP [...] vlan03: link state changed to UP [...] vlan010: link state changed to UP [...] vlan09: link state changed to UP [...] vlan011: link state changed to UP [...] vlan08: link state changed to UP [...] em3: link state changed to UP [...] em4: link state changed to UP [...] em5: link state changed to UP [...] em1: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] em1: link state changed to UP [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on vlan03 [...] arp: packet with unknown hardware format 0x06 received on vlan04 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8168796160 (7790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] Event timer "HPET7" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf600000-0xdf60ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf614000-0xdf615fff,0xdf618000-0xdf6180ff,0xdf617000-0xdf6177ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] em0: EEPROM V1.10-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] em1: EEPROM V1.10-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] em2: EEPROM V1.10-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] em3: EEPROM V1.10-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] em4: EEPROM V1.10-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] em5: EEPROM V1.10-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] Timecounter "TSC-low" frequency 1200000609 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for:ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] usbus0 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Protectli 120GB mSATA SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] Dual Console: Video Primary, Serial Secondary