[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p7 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz (3051.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3812405248 (3635 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <APPLE Apple00> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 1.1> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1525702142 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] 000.000025 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e70, 0) error 19 [...] [ath_dfs] loaded [...] [ath_rate] loaded [...] [ar9300] loaded [...] [ar5212] loaded [...] [ar5416] loaded [...] [ar5211] loaded [...] [ar5210] loaded [...] [ath] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <APPLE Apple00> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 25000000 Hz quality 950 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.1 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 3.1 (no driver attached) [...] pci0: <memory, RAM> at device 3.3 (no driver attached) [...] pci0: <memory, RAM> at device 3.4 (no driver attached) [...] pci0: <processor> at device 3.5 (no driver attached) [...] ohci0: <nVidia nForce MCP79 USB Controller> mem 0xd3588000-0xd3588fff at device 4.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3589200-0xd35892ff at device 4.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <nVidia nForce MCP79 USB Controller> mem 0xd3587000-0xd3587fff at device 6.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3589100-0xd35891ff at device 6.1 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <NVIDIA MCP79 HDA Controller> mem 0xd3580000-0xd3583fff at device 8.0 on pci0 [...] pcib1: <PCI-PCI bridge> at device 9.0 on pci0 [...] pci1: <PCI bus> on pcib1 [...] nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0xd3586000-0xd3586fff,0xd3589000-0xd35890ff,0xd3589300-0xd358930f at device 10.0 on pci0 [...] miibus0: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Using defaults for TSO: 65518/35/2048 [...] nfe0: Ethernet address: ... [...] ahci0: <NVIDIA MCP79 AHCI SATA controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0xd3584000-0xd3585fff at device 11.0 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x200<NOAA> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci3 [...] nvidia0: <GeForce 9400> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros 9280> mem 0xd3200000-0xd320ffff at device 0.0 on pci4 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9280 mac 128.2 RF5133 phy 13.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd3104000-0xd31047ff,0xd3100000-0xd3103fff at device 0.0 on pci6 [...] fwohci0: OHCI version 1.10 (ROM=0) [...] fwohci0: No. of Isochronous channels is 8. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: invalid speed 7 (fixed to 3). [...] fwohci0: Phy 1394a available S800, 3 ports. [...] fwohci0: Link S800, max_rec 4096 bytes. [...] fwohci0: phy int [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] sbp0: <SBP-2/SCSI over FireWire> on firewire0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Cirrus Logic CS4206 (Internal Analog 4.0/2.0)> at nid 10,11 and 13 on hdaa0 [...] pcm1: <Cirrus Logic CS4206 (Rear Analog)> at nid 9 and 12 on hdaa0 [...] pcm2: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 and 15 on hdaa0 [...] hdacc1: <NVIDIA MCP7A HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <NVIDIA MCP7A Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <NVIDIA MCP7A (Digital)> at nid 5 on hdaa1 [...] ugen2.1: <nVidia OHCI root HUB> at usbus2 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] ugen3.1: <nVidia EHCI root HUB> at usbus3 [...] uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/ada0p6 [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 CAM [...] uhub0: 5 ports with 5 removable, self powered [...] uhub2: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus1 usbus3 CAM [...] uhub3: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 usbus3 CAM [...] uhub1: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus1 usbus3 CAM [...] ugen2.2: <Apple Inc. BRCM2046 Hub> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2 [...] ugen3.2: <Apple Card Reader> at usbus3 [...] umass0 on uhub3 [...] umass0: <Apple Card Reader, class 0/0, rev 2.00/98.33, addr 2> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:3:0: Attached to scbus3 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418ASQ AP24> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVDRW GA11N JA18> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] GEOM: ada0: enabling Boot Camp [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <APPLE SD Card Reader 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: diskid/XXXXXXXXXXXXXX enabling Boot Camp [...] uhub4: 3 ports with 0 removable, self powered [...] ugen0.2: <PIXART USB OPTICAL MOUSE> at usbus0 [...] ugen1.2: <Apple, Inc. Keyboard Hub> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub5: 3 ports with 2 removable, bus powered [...] ugen2.3: <Apple Inc. Bluetooth USB Host Controller> at usbus2 [...] ubt0 on uhub4 [...] ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.08, addr 3> on usbus2 [...] ugen1.3: <Apple, Inc Apple Keyboard> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.71, addr 3> on usbus1 [...] ugen2.4: <vendor 0x05ac product 0x820a> at usbus2 [...] ukbd1 on uhub4 [...] ukbd1: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus2 [...] kbd1 at ukbd0 [...] kbd2 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen2.5: <vendor 0x05ac product 0x820b> at usbus2 [...] ugen1.4: <Apple Inc. Built-in iSight> at usbus1 [...] Root mount waiting for: usbus1 [...] mountroot: waiting for device /dev/ada0p6... [...] ugen0.3: <Apple Computer, Inc. IR Receiver> at usbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] nfe0: link state changed to DOWN [...] ums0 on uhub2 [...] ums0: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums1 on uhub4 [...] ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ums1: 3 buttons and [XY] coordinates ID=2 [...] uhid0 on uhub5 [...] uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.71, addr 3> on usbus1 [...] uhid1 on uhub2 [...] uhid1: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 3> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ugen2.4: <vendor 0x05ac product 0x820a> at usbus2 (disconnected) [...] ukbd1: at uhub4, port 2, addr 4 (disconnected) [...] ukbd1: detached [...] ugen2.5: <vendor 0x05ac product 0x820b> at usbus2 (disconnected) [...] ums1: at uhub4, port 3, addr 5 (disconnected) [...] ums1: detached [...] pflog0: promiscuous mode enabled