Probe #2ab744d2c8 of ASUSTek PRIME B460M-A Desktop Computer
Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 1024x768
[...] CPU: Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz (2900.00-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
[...] Structured Extended Features2=0x40000000<SGXLC>
[...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 17179869184 (16384 MB)
[...] avail memory = 16509005824 (15744 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119
[...] Launching APs: 1 8 9 7 11 6 2 4 5 10 3
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0x9eab8000-0x9eab801e
[...] smbios0: Version: 3.2, BCD Revision: 3.2
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa1000000-0xa1ffffff,0xa8000000-0xafffffff,0xb0000000-0xb1ffffff irq 16 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xa2080000-0xa2083fff irq 17 at device 0.1 on pci1
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa2410000-0xa241ffff at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x6050-0x6057,0x6040-0x6043,0x6020-0x603f mem 0xa2428000-0xa2429fff,0xa242c000-0xa242c0ff,0xa242b000-0xa242b7ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 27.0 on pci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci2: <ACPI PCI bus> on pcib4
[...] re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa2304000-0xa2304fff,0xa2300000-0xa2303fff irq 19 at device 0.0 on pci2
[...] re0: Using Memory Mapping!
[...] re0: Using 1 MSI-X message
[...] re0: ASPM disabled
[...] re0: version:1.98.00
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
[...] pci3: <ACPI PCI bus> on pcib5
[...] re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa2204000-0xa2204fff,0xa2200000-0xa2203fff irq 16 at device 0.0 on pci3
[...] re1: Using Memory Mapping!
[...] re1: Using 1 MSI-X message
[...] re1: ASPM disabled
[...] re1: version:1.98.00
[...] re1: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re1: Ethernet address: ...
[...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib6
[...] nvme0: <Generic NVMe Device> mem 0xa2100000-0xa2103fff irq 16 at device 0.0 on pci4
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <memory> at device 31.2 (no driver attached)
[...] hdac1: <Intel Comet Lake-S HDA Controller> mem 0xa2420000-0xa2423fff,0xa2400000-0xa240ffff irq 16 at device 31.3 on pci0
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_button1: <Power Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
[...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
[...] ppbus0: <Parallel port bus> on ppc1
[...] lpt0: <Printer> on ppbus0
[...] lpt0: Interrupt-driven port
[...] ppi0: <Parallel I/O> on ppbus0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hwpstate_intel0: <Intel Speed Shift> on cpu0
[...] hwpstate_intel1: <Intel Speed Shift> on cpu1
[...] hwpstate_intel2: <Intel Speed Shift> on cpu2
[...] hwpstate_intel3: <Intel Speed Shift> on cpu3
[...] hwpstate_intel4: <Intel Speed Shift> on cpu4
[...] hwpstate_intel5: <Intel Speed Shift> on cpu5
[...] hwpstate_intel6: <Intel Speed Shift> on cpu6
[...] hwpstate_intel7: <Intel Speed Shift> on cpu7
[...] hwpstate_intel8: <Intel Speed Shift> on cpu8
[...] hwpstate_intel9: <Intel Speed Shift> on cpu9
[...] hwpstate_intel10: <Intel Speed Shift> on cpu10
[...] hwpstate_intel11: <Intel Speed Shift> on cpu11
[...] Timecounter "TSC-low" frequency 1451997518 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
[...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvme0: Allocated 64MB host memory buffer
[...] nvd0: <GV128> NVMe namespace
[...] nvd0: 122104MB (250069680 512 byte sectors)
[...] hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1
[...] pcm2: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa1
[...] pcm3: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm4: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/nvd0p2 [rw]...
[...] WARNING: / was not properly dismounted
[...] WARNING: /: mount pending error: blocks 240 files 0
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
[...] cd0: <HL-DT-ST DVDRAM GH24NSD5 LV00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: 0MB (1 0 byte sectors)
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <ST98823AS 7.24> ATA-7 SATA 1.x device
[...] ada0: Serial Number...
[...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
[...] ada0: 76319MB (156301488 512 byte sectors)
[...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
[...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0
[...] uhub0: 24 ports with 24 removable, self powered
[...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0
[...] run0 on uhub0
[...] run0: <1.0> on usbus0
[...] run0: MAC/BBP RT3070 (rev 0x0200), RF RT3020 (MIMO 1T1R), address XXX
[...] run0: [HT] Enabling 802.11n
[...] ugen0.3: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)> at usbus0
[...] ugen0.4: <USB USB Keyboard> at usbus0
[...] ukbd0 on uhub0
[...] ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus0
[...] kbd2 at ukbd0
[...] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi0: cannot find EC device
[...] acpi_wmi0: Embedded MOF found
[...] ACPI: \134AWW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi1: cannot find EC device
[...] acpi_wmi1: Embedded MOF found
[...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi2: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi2: cannot find EC device
[...] acpi_wmi2: Embedded MOF found
[...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi3: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi3: cannot find EC device
[...] acpi_wmi3: Embedded MOF found
[...] ACPI: \134ACCE.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi4: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi4: cannot find EC device
[...] acpi_wmi4: Embedded MOF found
[...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi5: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi5: cannot find EC device
[...] acpi_wmi5: Embedded MOF found
[...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi6: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi6: cannot find EC device
[...] ums0 on uhub0
[...] ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on usbus0
[...] ums0: 3 buttons and [XYZ] coordinates ID=0
[...] uhid0 on uhub0
[...] uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus0
[...] lo0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] vlan0: changing name to 'vlan0.1.39'
[...] vlan1: changing name to 'vlan0.2'
[...] vlan2: changing name to 'vlan0.5'
[...] re0: link state changed to DOWN
[...] re1: link state changed to DOWN
[...] vlan0.2: link state changed to DOWN
[...] vlan0.5: link state changed to DOWN
[...] vlan0.1.39: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] 155.662784 [1173] generic_netmap_attach Emulated adapter for vlan0.2 created (prev was NULL)
[...] 155.671602 [1078] generic_netmap_dtor Emulated netmap adapter for vlan0.2 destroyed
[...] 155.679909 [1173] generic_netmap_attach Emulated adapter for vlan0.2 created (prev was NULL)
[...] 155.907813 [ 321] generic_netmap_register Emulated adapter for vlan0.2 activated
[...] 155.915614 [1173] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 155.924151 [1078] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 155.932161 [1173] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 155.940737 [ 321] generic_netmap_register Emulated adapter for re0 activated
[...] re1: link state changed to UP
[...] vlan0.2: link state changed to UP
[...] vlan0.5: link state changed to UP
[...] vlan0.1.39: link state changed to UP
[...] [fib_algo] inet.0 (bsearch4#44) rebuild_fd_flm: switching algo to radix4_lockless
[...] wlan0: Ethernet address: ...
[...] wlan0: changing name to 'run0_wlan1'
[...] wlan0: Ethernet address: ...
[...] wlan0: changing name to 'run0_wlan1'
[...] run0: firmware RT2870 ver. 0.33 loaded
[...] run0: firmware RT2870 ver. 0.33 loaded
[...] run0: firmware RT2870 ver. 0.33 loaded
[...] run0_wlan1: ieee80211_new_state_locked: pending RUN -> SCAN transition lost
[...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 (disconnected)
[...] run0: at uhub0, port 3, addr 1 (disconnected)
[...] run0: detached
[...] vlan3: changing name to 'vlan0.6'
[...] tun1: changing name to 'ovpns1'
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] tun1: changing name to 'ovpns1'
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] tun1: changing name to 'ovpns1'
[...] ovpns1: link state changed to UP
[...] 668.689539 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 668.698063 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 668.706025 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 668.714619 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 668.722593 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 668.731165 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 668.740325 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 668.748861 [ 321] generic_netmap_register Emulated adapter for re1 activated
[...] re1: link state changed to DOWN
[...] vlan0.2: link state changed to DOWN
[...] vlan0.5: link state changed to DOWN
[...] vlan0.1.39: link state changed to DOWN
[...] vlan0.6: link state changed to DOWN
[...] re1: link state changed to UP
[...] vlan0.2: link state changed to UP
[...] vlan0.5: link state changed to UP
[...] vlan0.1.39: link state changed to UP
[...] vlan0.6: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] 605.136665 [ 296] generic_netmap_unregister Emulated adapter for vlan0.2 deactivated
[...] 605.144455 [1078] generic_netmap_dtor Emulated netmap adapter for vlan0.2 destroyed
[...] 605.553482 [ 296] generic_netmap_unregister Emulated adapter for re0 deactivated
[...] 605.560896 [1078] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 611.891983 [ 296] generic_netmap_unregister Emulated adapter for re1 deactivated
[...] 611.900712 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 7 7 fsync: giving up on dirty (error = 35) 0xfffff80003c6f000: type VCHR
[...] usecount 1, writecount 0, refcount 599 seqc users 0 rdev 0xfffff80001ac4800
[...] hold count flags ()
[...] flags ()
[...] v_object 0xfffff80003c4fe70 ref 0 pages 17556 cleanbuf 596 dirtybuf 1
[...] lock type mntfs: EXCL by thread 0xfffffe00e3f5ce40 (pid 18, syncer, tid 100185)
[...] 5 1 1 0 0 0 done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p3 stable/23.7-n254818-f155405f505 SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 1024x768
[...] CPU: Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz (2900.00-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
[...] Structured Extended Features2=0x40000000<SGXLC>
[...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 17179869184 (16384 MB)
[...] avail memory = 16509005824 (15744 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119
[...] Launching APs: 1 5 9 11 10 4 3 7 8 6 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0x9eab8000-0x9eab801e
[...] smbios0: Version: 3.2, BCD Revision: 3.2
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa1000000-0xa1ffffff,0xa8000000-0xafffffff,0xb0000000-0xb1ffffff irq 16 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xa2080000-0xa2083fff irq 17 at device 0.1 on pci1
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa2410000-0xa241ffff at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x6050-0x6057,0x6040-0x6043,0x6020-0x603f mem 0xa2428000-0xa2429fff,0xa242c000-0xa242c0ff,0xa242b000-0xa242b7ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 27.0 on pci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci2: <ACPI PCI bus> on pcib4
[...] re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa2304000-0xa2304fff,0xa2300000-0xa2303fff irq 19 at device 0.0 on pci2
[...] re0: Using Memory Mapping!
[...] re0: Using 1 MSI-X message
[...] re0: ASPM disabled
[...] re0: version:1.98.00
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
[...] pci3: <ACPI PCI bus> on pcib5
[...] re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa2204000-0xa2204fff,0xa2200000-0xa2203fff irq 16 at device 0.0 on pci3
[...] re1: Using Memory Mapping!
[...] re1: Using 1 MSI-X message
[...] re1: ASPM disabled
[...] re1: version:1.98.00
[...] re1: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re1: Ethernet address: ...
[...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib6
[...] nvme0: <Generic NVMe Device> mem 0xa2100000-0xa2103fff irq 16 at device 0.0 on pci4
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <memory> at device 31.2 (no driver attached)
[...] hdac1: <Intel Comet Lake-S HDA Controller> mem 0xa2420000-0xa2423fff,0xa2400000-0xa240ffff irq 16 at device 31.3 on pci0
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_button1: <Power Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
[...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
[...] ppbus0: <Parallel port bus> on ppc1
[...] lpt0: <Printer> on ppbus0
[...] lpt0: Interrupt-driven port
[...] ppi0: <Parallel I/O> on ppbus0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hwpstate_intel0: <Intel Speed Shift> on cpu0
[...] hwpstate_intel1: <Intel Speed Shift> on cpu1
[...] hwpstate_intel2: <Intel Speed Shift> on cpu2
[...] hwpstate_intel3: <Intel Speed Shift> on cpu3
[...] hwpstate_intel4: <Intel Speed Shift> on cpu4
[...] hwpstate_intel5: <Intel Speed Shift> on cpu5
[...] hwpstate_intel6: <Intel Speed Shift> on cpu6
[...] hwpstate_intel7: <Intel Speed Shift> on cpu7
[...] hwpstate_intel8: <Intel Speed Shift> on cpu8
[...] hwpstate_intel9: <Intel Speed Shift> on cpu9
[...] hwpstate_intel10: <Intel Speed Shift> on cpu10
[...] hwpstate_intel11: <Intel Speed Shift> on cpu11
[...] Timecounter "TSC-low" frequency 1451997463 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
[...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvme0: Allocated 64MB host memory buffer
[...] nvd0: <GV128> NVMe namespace
[...] nvd0: 122104MB (250069680 512 byte sectors)
[...] hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1
[...] pcm2: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa1
[...] pcm3: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm4: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/nvd0p2 [rw]...
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
[...] cd0: <HL-DT-ST DVDRAM GH24NSD5 LV00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: 0MB (1 0 byte sectors)
[...] ses0: pass0 in 'Slot 00', SATA Slot: scbus0 target 0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <ST98823AS 7.24> ATA-7 SATA 1.x device
[...] ada0: Serial Number...
[...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
[...] ada0: 76319MB (156301488 512 byte sectors)
[...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0
[...] uhub0: 24 ports with 24 removable, self powered
[...] ugen0.2: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)> at usbus0
[...] ugen0.3: <USB USB Keyboard> at usbus0
[...] ukbd0 on uhub0
[...] ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
[...] kbd2 at ukbd0
[...] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi0: cannot find EC device
[...] acpi_wmi0: Embedded MOF found
[...] ACPI: \134AWW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi1: cannot find EC device
[...] acpi_wmi1: Embedded MOF found
[...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi2: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi2: cannot find EC device
[...] acpi_wmi2: Embedded MOF found
[...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi3: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi3: cannot find EC device
[...] acpi_wmi3: Embedded MOF found
[...] ACPI: \134ACCE.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi4: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi4: cannot find EC device
[...] acpi_wmi4: Embedded MOF found
[...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi5: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi5: cannot find EC device
[...] acpi_wmi5: Embedded MOF found
[...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[...] acpi_wmi6: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi6: cannot find EC device
[...] ums0 on uhub0
[...] ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 1> on usbus0
[...] ums0: 3 buttons and [XYZ] coordinates ID=0
[...] uhid0 on uhub0
[...] uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
[...] lo0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] re1: link state changed to UP
[...] vlan0: changing name to 'vlan0.1.39'
[...] vlan1: changing name to 'vlan0.2'
[...] vlan2: changing name to 'vlan0.5'
[...] vlan3: changing name to 'vlan0.6'
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] [fib_algo] inet.0 (bsearch4#22) rebuild_fd_flm: switching algo to radix4_lockless
[...] tun1: changing name to 'ovpns1'
[...] ovpns1: link state changed to UP
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] 670.205966 [1173] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 670.214802 [1078] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 670.223110 [1173] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 670.489885 [ 321] generic_netmap_register Emulated adapter for re0 activated
[...] 670.497236 [1173] generic_netmap_attach Emulated adapter for vlan0.2 created (prev was NULL)
[...] 670.506466 [1078] generic_netmap_dtor Emulated netmap adapter for vlan0.2 destroyed
[...] 670.515173 [1173] generic_netmap_attach Emulated adapter for vlan0.2 created (prev was NULL)
[...] 670.524457 [ 321] generic_netmap_register Emulated adapter for vlan0.2 activated
[...] 712.071276 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 712.079823 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 712.087821 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 712.096444 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 712.104429 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 712.113067 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 712.122263 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 712.130794 [ 321] generic_netmap_register Emulated adapter for re1 activated
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 6, rcvif vlan0.6, outif gif0
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] gif0: link state changed to DOWN
[...] gif0: link state changed to UP
[...] 640.257365 [ 296] generic_netmap_unregister Emulated adapter for vlan0.2 deactivated
[...] 640.265135 [1078] generic_netmap_dtor Emulated netmap adapter for vlan0.2 destroyed
[...] 640.385216 [ 296] generic_netmap_unregister Emulated adapter for re0 deactivated
[...] 640.392645 [1078] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 646.747666 [ 296] generic_netmap_unregister Emulated adapter for re1 deactivated
[...] 646.756369 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 45 45 fsync: giving up on dirty (error = 35) 0xfffff80002162000: type VCHR
[...] usecount 1, writecount 0, refcount 1034 seqc users 0 rdev 0xfffff800037e8400
[...] hold count flags ()
[...] flags ()
[...] v_object 0xfffff80001127b58 ref 0 pages 17746 cleanbuf 1031 dirtybuf 1
[...] lock type mntfs: EXCL by thread 0xfffffe00df86a720 (pid 18, syncer, tid 100185)
[...] 42 42 2 1 0 0 0 done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p5 stable/23.7-n254837-8806e8fefb1 SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 1024x768
[...] CPU: Intel(R) Core(TM) i5-10400F CPU @ 2.90GHz (2900.00-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
[...] Structured Extended Features2=0x40000000<SGXLC>
[...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 17179869184 (16384 MB)
[...] avail memory = 16509005824 (15744 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119
[...] Launching APs: 1 11 10 7 3 5 9 6 2 4 8
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0x9eab8000-0x9eab801e
[...] smbios0: Version: 3.2, BCD Revision: 3.2
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa1000000-0xa1ffffff,0xa8000000-0xafffffff,0xb0000000-0xb1ffffff irq 16 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xa2080000-0xa2083fff irq 17 at device 0.1 on pci1
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa2410000-0xa241ffff at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x6050-0x6057,0x6040-0x6043,0x6020-0x603f mem 0xa2428000-0xa2429fff,0xa242c000-0xa242c0ff,0xa242b000-0xa242b7ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 27.0 on pci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci2: <ACPI PCI bus> on pcib4
[...] re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xa2304000-0xa2304fff,0xa2300000-0xa2303fff irq 19 at device 0.0 on pci2
[...] re0: Using Memory Mapping!
[...] re0: Using 1 MSI-X message
[...] re0: ASPM disabled
[...] re0: version:1.98.00
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
[...] pci3: <ACPI PCI bus> on pcib5
[...] re1: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xa2204000-0xa2204fff,0xa2200000-0xa2203fff irq 16 at device 0.0 on pci3
[...] re1: Using Memory Mapping!
[...] re1: Using 1 MSI-X message
[...] re1: ASPM disabled
[...] re1: version:1.98.00
[...] re1: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re1: Ethernet address: ...
[...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib6
[...] nvme0: <Generic NVMe Device> mem 0xa2100000-0xa2103fff irq 16 at device 0.0 on pci4
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <memory> at device 31.2 (no driver attached)
[...] hdac1: <Intel Comet Lake-S HDA Controller> mem 0xa2420000-0xa2423fff,0xa2400000-0xa240ffff irq 16 at device 31.3 on pci0
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_button1: <Power Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
[...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
[...] ppbus0: <Parallel port bus> on ppc1
[...] lpt0: <Printer> on ppbus0
[...] lpt0: Interrupt-driven port
[...] ppi0: <Parallel I/O> on ppbus0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hwpstate_intel0: <Intel Speed Shift> on cpu0
[...] hwpstate_intel1: <Intel Speed Shift> on cpu1
[...] hwpstate_intel2: <Intel Speed Shift> on cpu2
[...] hwpstate_intel3: <Intel Speed Shift> on cpu3
[...] hwpstate_intel4: <Intel Speed Shift> on cpu4
[...] hwpstate_intel5: <Intel Speed Shift> on cpu5
[...] hwpstate_intel6: <Intel Speed Shift> on cpu6
[...] hwpstate_intel7: <Intel Speed Shift> on cpu7
[...] hwpstate_intel8: <Intel Speed Shift> on cpu8
[...] hwpstate_intel9: <Intel Speed Shift> on cpu9
[...] hwpstate_intel10: <Intel Speed Shift> on cpu10
[...] hwpstate_intel11: <Intel Speed Shift> on cpu11
[...] Timecounter "TSC-low" frequency 1451997280 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
[...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvme0: Allocated 64MB host memory buffer
[...] nvd0: <GV128> NVMe namespace
[...] nvd0: 122104MB (250069680 512 byte sectors)
[...] hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1
[...] pcm2: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa1
[...] pcm3: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm4: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/nvd0p2 [rw]...
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
[...] cd0: <HL-DT-ST DVDRAM GH24NSD5 LV00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: 0MB (1 0 byte sectors)
[...] ses0: pass0 in 'Slot 00', SATA Slot: scbus0 target 0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <ST98823AS 7.24> ATA-7 SATA 1.x device
[...] ada0: Serial Number...
[...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
[...] ada0: 76319MB (156301488 512 byte sectors)
[...] ses0: pass1,cd0 in 'Slot 02', SATA Slot: scbus2 target 0