[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-5020U CPU @ 2.20GHz (2195.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8189440000 (7810 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf7314000-0xf7317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7310000-0xf7313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci2 [...] em0: EEPROM V0.5-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7100000-0xf711ffff,0xf7120000-0xf7123fff irq 19 at device 0.0 on pci3 [...] em1: EEPROM V0.5-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros AR938x> mem 0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 579.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf731b000-0xf731b3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf731a000-0xf731a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart3: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] uart4: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0 [...] uart5: <16550 or compatible> port 0x2f0-0x2f7 irq 7 on acpi0 [...] uart6: <16550 or compatible> port 0x2e0-0x2e7 irq 7 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1097459240 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 20 and 24 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Analog Speaker)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KingFast R0831B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7319000-0xf73190ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] pchtherm0: <Wildcat Point Thermal Subsystem> mem 0xf7318000-0xf7318fff irq 18 at device 31.6 on pci0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1 [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-5020U CPU @ 2.20GHz (2194.99-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8189440000 (7810 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf7314000-0xf7317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7310000-0xf7313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci2 [...] em0: EEPROM V0.5-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7100000-0xf711ffff,0xf7120000-0xf7123fff irq 19 at device 0.0 on pci3 [...] em1: EEPROM V0.5-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros AR938x> mem 0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 579.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf731b000-0xf731b3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf731a000-0xf731a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart3: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] uart4: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0 [...] uart5: <16550 or compatible> port 0x2f0-0x2f7 irq 7 on acpi0 [...] uart6: <16550 or compatible> port 0x2e0-0x2e7 irq 7 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1097459329 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 20 and 24 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Analog Speaker)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KingFast R0831B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: 15 ports with 15 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7319000-0xf73190ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] pchtherm0: <Wildcat Point Thermal Subsystem> mem 0xf7318000-0xf7318fff irq 18 at device 31.6 on pci0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg2: link state changed to UP [...] wg1: link state changed to DOWN [...] wg2: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] wg1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 5 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-5020U CPU @ 2.20GHz (2195.06-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8189440000 (7810 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Polarity. Assume CONFORMS [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf7314000-0xf7317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7310000-0xf7313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci2 [...] em0: EEPROM V0.5-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7100000-0xf711ffff,0xf7120000-0xf7123fff irq 19 at device 0.0 on pci3 [...] em1: EEPROM V0.5-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros AR938x> mem 0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 579.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf731b000-0xf731b3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf731a000-0xf731a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart3: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] uart4: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0 [...] uart5: <16550 or compatible> port 0x2f0-0x2f7 irq 7 on acpi0 [...] uart6: <16550 or compatible> port 0x2e0-0x2e7 irq 7 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1097459293 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 20 and 24 on hdaa1 [...] pcm2: <Realtek ALC892 (Internal Analog Speaker)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KingFast R0831B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered