[...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [...] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [...] 2018, 2019, 2020, 2021, 2022 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 8094 MB [...] avail memory = 7827 MB [...] cpu_rng: RDSEED [...] rnd: seeded with 256 bits [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] running cgd selftest aes-xts-256 aes-xts-512 done [...] RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 8ae8ee10 [...] Apple Inc. MacBookAir7,2 (1.0) [...] mainbus0 (root) [...] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE ) [...] ACPI: XSDT 0x000000008AD8E1C0 00009C (v01 APPLE Apple00 00000000 01000013) [...] ACPI: FACP 0x000000008AD8C000 0000F4 (v05 APPLE Apple00 00000000 Loki 0000005F) [...] ACPI: DSDT 0x000000008AD7E000 0088DA (v03 APPLE MacBookA 00070001 INTL 20140424) [...] ACPI: FACS 0x000000008AD06000 000040 [...] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SSDT 0x000000008AD7D000 00010B (v01 APPLE SataAhci 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD7C000 000024 (v01 APPLE SmcDppt 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD7B000 000032 (v01 APPLE SsdtS3 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD78000 002B26 (v01 APPLE PcieTbt 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD6B000 0000B8 (v01 APPLE Sdxc 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD6A000 000AAC (v02 APPLE Xhci 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD63000 000639 (v01 PmRef Cpu0Ist 00003000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD62000 000C17 (v01 CpuRef CpuSsdt 00003000 INTL 20140424) [...] ACPI: DMAR 0x000000008AD61000 000088 (v01 APPLE BDW 00000001 INTL 00000001) [...] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: 9 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins [...] x2APIC available but disabled by DMAR table [...] cpu0 at mainbus0 apid 0 [...] cpu0: Intel(R) Core(TM) i5-5350U CPU @ 1.80GHz, id 0x306d4 [...] cpu0: package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) Core(TM) i5-5350U CPU @ 1.80GHz, id 0x306d4 [...] cpu1: package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 1 [...] cpu2: Intel(R) Core(TM) i5-5350U CPU @ 1.80GHz, id 0x306d4 [...] cpu2: package 0, core 0, smt 1 [...] cpu3 at mainbus0 apid 3 [...] cpu3: Intel(R) Core(TM) i5-5350U CPU @ 1.80GHz, id 0x306d4 [...] cpu3: package 0, core 1, smt 1 [...] acpi0 at mainbus0: Intel ACPICA 20190405 [...] acpi0: X/RSDT: OemId <APPLE , Apple00,00000000>, AslId < ,01000013> [...] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [...] acpi0: MCFG: segment 0, bus 0-155, address 0x00000000e0000000 [...] ACPI Error: Needed type [Reference], found [Integer] 0xffffc64d51d6a7e0 (20190405/exresop-114) [...] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500) [...] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC64D51DD1008 00067C (v01 PmRef ApIst 00003000 INTL 20140424) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC64D51D1E388 000119 (v01 PmRef ApCst 00003000 INTL 20140424) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [...] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [...] acpivga0 at acpi0 (IGPU): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device [...] acpiout0: brightness levels: [0-100] [...] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpivga0: connected output devices: [...] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 [...] FWHD (INT0800) at acpi0 not configured [...] LDRC (PNP0C02) at acpi0 not configured [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 [...] SMC (APP0001) at acpi0 not configured [...] ALS0 (ACPI0008) at acpi0 not configured [...] SBS0 (ACPI0002) at acpi0 not configured [...] SPIT (APP000D) at acpi0 not configured [...] PDRC (PNP0C02) at acpi0 not configured [...] MEM2 (PNP0C01) at acpi0 not configured [...] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [...] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter [...] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch [...] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] PNLF (APP0002) at acpi0 not configured [...] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1604 (rev. 0x09) [...] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1626 (rev. 0x09) [...] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller [...] hdaudio0: interrupting at msi0 vec 0 [...] hdaudio0: autoconfiguration error: RIRB timeout [...] hdaudio0: autoconfiguration error: RIRB timeout [...] xhci0 at pci0 dev 20 function 0: vendor 8086 product 9cb1 (rev. 0x03) [...] xhci0: interrupting at msi1 vec 0 [...] xhci0: xHCI version 1.0 [...] usb0 at xhci0: USB revision 3.0 [...] usb1 at xhci0: USB revision 2.0 [...] vendor 8086 product 9cba (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured [...] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller [...] hdaudio1: interrupting at msi2 vec 0 [...] hdafg0 at hdaudio1: vendor 1013 product 4208 [...] hdafg0: DAC00 2ch: Speaker [Built-In] [...] hdafg0: DAC01 2ch: HP Out [Jack] [...] hdafg0: ADC02 2ch: Mic In [Jack] [...] hdafg0: 2ch/2ch 48000Hz PCM16* [...] audio0 at hdafg0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr0 at audio0: PC Speaker (synthesized) [...] wsbell at spkr0 not configured [...] ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c90 (rev. 0xe3) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb1 at pci0 dev 28 function 1: vendor 8086 product 9c92 (rev. 0xe3) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 14e4 product 1570 (miscellaneous multimedia) at pci2 dev 0 function 0 not configured [...] ppb2 at pci0 dev 28 function 2: vendor 8086 product 9c94 (rev. 0xe3) [...] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] ppb2: link is x1 @ 2.5GT/s [...] pci3 at ppb2 bus 3 [...] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 14e4 product 43a0 (miscellaneous network, revision 0x03) at pci3 dev 0 function 0 not configured [...] ppb3 at pci0 dev 28 function 4: vendor 8086 product 9c98 (rev. 0xe3) [...] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] pci4 at ppb3 bus 5 [...] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb4 at pci0 dev 28 function 5: vendor 8086 product 9c9a (rev. 0xe3) [...] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] pci5 at ppb4 bus 4 [...] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [...] ahcisata0 at pci5 dev 0 function 0: vendor 144d product a801 (rev. 0x01) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc3349f80<CCCS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A> [...] ahcisata0: interrupting at msi3 vec 0 [...] atabus0 at ahcisata0 channel 0 [...] pcib0 at pci0 dev 31 function 0: vendor 8086 product 9cc3 (rev. 0x03) [...] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9ca2 (rev. 0x03) [...] ichsmb0: interrupting at ioapic0 pin 18 [...] iic0 at ichsmb0: I2C bus [...] vendor 8086 product 9ca4 (miscellaneous DASP, revision 0x03) at pci0 dev 31 function 6 not configured [...] isa0 at pcib0 [...] com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo [...] pcppi0 at isa0 port 0x61 [...] spkr1 at pcppi0: PC Speaker [...] wsbell at spkr1 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC64D51F06808 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20140424) [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 148 us, pow 200 mW [...] acpicpu0: C3: FFH, lat 530 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 1801 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 1800 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 13939 mW, 1700 MHz [...] acpicpu0: P3: FFH, lat 10 us, pow 12900 mW, 1600 MHz [...] acpicpu0: P4: FFH, lat 10 us, pow 12027 mW, 1500 MHz [...] acpicpu0: P5: FFH, lat 10 us, pow 11029 mW, 1400 MHz [...] acpicpu0: P6: FFH, lat 10 us, pow 10193 mW, 1300 MHz [...] acpicpu0: P7: FFH, lat 10 us, pow 9236 mW, 1200 MHz [...] acpicpu0: P8: FFH, lat 10 us, pow 8436 mW, 1100 MHz [...] acpicpu0: P9: FFH, lat 10 us, pow 7516 mW, 1000 MHz [...] acpicpu0: P10: FFH, lat 10 us, pow 6751 mW, 900 MHz [...] acpicpu0: P11: FFH, lat 10 us, pow 5870 mW, 800 MHz [...] acpicpu0: P12: FFH, lat 10 us, pow 5009 mW, 700 MHz [...] acpicpu0: P13: FFH, lat 10 us, pow 4297 mW, 600 MHz [...] acpicpu0: P14: FFH, lat 10 us, pow 3473 mW, 500 MHz [...] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [...] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [...] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [...] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [...] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [...] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [...] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [...] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu2 at cpu2: ACPI CPU [...] acpicpu3 at cpu3: ACPI CPU [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 1800082520 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 11 ports with 11 removable, self powered [...] acpiacad0: AC adapter offline. [...] IPsec: Initialized Security Association Processing. [...] acpilid0: lid closed. [...] ahcisata0 port 0: device present, speed: 6.0Gb/s [...] wd0 at atabus0 drive 0 [...] wd0: <APPLE SSD SM0128G> [...] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [...] wd0: 113 GB, 235097 cyl, 16 head, 63 sec, 512 bytes/sect x 236978176 sectors (0 bytes/physsect; first aligned sector: 8) [...] wd0: GPT GUID: HASH_D27-D9CC-FA01-1C74-F9A85F25DD1E [...] dk0 at wd0: "EFI System Partition", 262144 blocks at 64, type: msdos [...] dk1 at wd0: "HASH_A65-3F71-092C-C011-CE86E50D342B", 236715935 blocks at 262208, type: ffs [...] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [...] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [...] uhub2 at uhub1 port 1: VIA Labs, Inc. (0x2109) USB2.0 Hub (0x2813), class 9/0, rev 2.10/2.21, addr 2 [...] uhub2: single transaction translator [...] uhub3 at uhub0 port 1: VIA Labs, Inc. (0x2109) USB3.0 Hub (0x813), class 9/0, rev 3.00/2.21, addr 1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhidev0 at uhub2 port 2 configuration 1 interface 0 [...] uhidev0: vendor 413c (0x413c) Dell KB216 Wired Keyboard (0x2113), rev 2.00/1.10, addr 3, iclass 3/1 [...] ukbd0 at uhidev0 [...] umass0 at uhub0 port 3 configuration 1 interface 0 [...] umass0: Apple (0x5ac) Card Reader (0x8406), rev 3.00/8.20, addr 4 [...] umass0: using SCSI over Bulk-Only [...] scsibus0 at umass0: 2 targets, 1 lun per target [...] sd0 at scsibus0 target 0 lun 0: <APPLE, SD Card Reader, 3.00> disk removable [...] sd0: drive offline [...] wskbd0 at ukbd0: console keyboard [...] uhidev1 at uhub2 port 2 configuration 1 interface 1 [...] uhidev1: vendor 413c (0x413c) Dell KB216 Wired Keyboard (0x2113), rev 2.00/1.10, addr 3, iclass 3/0 [...] uhidev1: 2 report ids [...] uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 [...] uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0 [...] uhidev2 at uhub2 port 3 configuration 1 interface 0 [...] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 5, iclass 3/1 [...] ums0 at uhidev2: 3 buttons and Z dir [...] wsmouse0 at ums0 mux 0 [...] axe0 at uhub2 port 4 [...] axe0: vendor 05ac (0x5ac) product 1402 (0x1402), rev 2.00/0.01, addr 6 [...] ukphy0 at axe0 phy 16: OUI 0x007063, model 0x0006, rev. 1 [...] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] axe0: Ethernet address XXX [...] uhub4 at uhub1 port 3: Apple Inc. (0xa5c) BRCM20702 Hub (0x4500), class 9/0, rev 2.00/1.00, addr 7 [...] uhub4: 3 ports with 0 removable, self powered [...] uhidev3 at uhub4 port 1 configuration 1 interface 0 [...] uhidev3: vendor 05ac (0x5ac) product 820a (0x820a), rev 2.00/1.00, addr 8, iclass 3/1 [...] uhidev3: 1 report ids [...] ukbd1 at uhidev3 reportid 1 [...] wskbd1 at ukbd1 mux 1 [...] uhidev4 at uhub4 port 2 configuration 1 interface 0 [...] uhidev4: vendor 05ac (0x5ac) product 820b (0x820b), rev 2.00/1.00, addr 9, iclass 3/1 [...] uhidev4: 2 report ids [...] ums1 at uhidev4 reportid 2: 3 buttons [...] wsmouse1 at ums1 mux 0 [...] ubt0 at uhub4 port 3 [...] ubt0: Apple Inc. (0x5ac) Bluetooth USB Host Controller (0x828f), rev 2.00/1.44, addr 10 [...] uhidev5 at uhub1 port 5 configuration 1 interface 0 [...] uhidev5: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x291), rev 2.00/1.71, addr 11, iclass 3/0 [...] uhidev5: 63 report ids [...] uhid2 at uhidev5 reportid 63: input=64, output=0, feature=0 [...] uhidev6 at uhub1 port 5 configuration 1 interface 1 [...] uhidev6: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x291), rev 2.00/1.71, addr 11, iclass 3/1 [...] uhidev6: 63 report ids [...] ukbd2 at uhidev6 reportid 1 [...] wskbd2 at ukbd2 mux 1 [...] uhid3 at uhidev6 reportid 9: input=0, output=0, feature=3 [...] uhid4 at uhidev6 reportid 63: input=64, output=0, feature=0 [...] uhidev7 at uhub1 port 5 configuration 1 interface 2 [...] uhidev7: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x291), rev 2.00/1.71, addr 11, iclass 3/1 [...] uhidev7: 68 report ids [...] ums2 at uhidev7 reportid 2: 3 buttons [...] wsmouse2 at ums2 mux 0 [...] uhid5 at uhidev7 reportid 63: input=16, output=0, feature=0 [...] uhid6 at uhidev7 reportid 68: input=1023, output=0, feature=0 [...] WARNING: 2 errors while detecting hardware; check system log. [...] boot device: wd0 [...] root on dk1 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/9.3/modules [...] kern info: [drm] Memory usable by graphics device = 4096M [...] WARNING: clock gained 4 days [...] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] kern info: [drm] Driver supports precise vblank timestamp query. [...] kern info: [drm] failed to find VBIOS tables [...] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [...] kern info: [drm] failed to retrieve link info, disabling eDP [...] kern info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [...] intelfb0 at i915drmkms0 [...] intelfb0: framebuffer at 0xffffa080af173000, size 1920x1080, depth 32, stride 7680 [...] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [...] wsmux1: connecting to wsdisplay0 [...] wskbd1: connecting to wsdisplay0 [...] wskbd2: connecting to wsdisplay0 [...] acpibat0: normal capacity on 'charge state' [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)