[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] CPU: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (2993.15-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x21<LAHF,ABM> [...] [1] Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG> [...] [1] XSAVE Features=0x1<XSAVEOPT> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16530698240 (15764 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I> [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 [...] [1] aesni0: No AES or SHA support. [...] [1] acpi0: <ALASKA A M I> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7ea0000-0xf7ebffff,0xf7e80000-0xf7e9ffff irq 16 at device 0.0 on pci1 [...] [1] em0: EEPROM V5.11-2 [...] [1] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em0: Using an MSI interrupt [...] [1] em0: Ethernet address: ... [...] [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] [1] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7e40000-0xf7e5ffff,0xf7e20000-0xf7e3ffff irq 17 at device 0.1 on pci1 [...] [1] em1: EEPROM V5.11-2 [...] [1] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] em1: Using an MSI interrupt [...] [1] em1: Ethernet address: ... [...] [1] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] xhci0: Port routing mask set to 0xffffffff [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci0 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] hdac0: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff irq 22 at device 27.0 on pci0 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci3 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: Chip rev. 0x2c800000 [...] [1] re0: MAC rev. 0x00100000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7c00000-0xf7c00fff irq 19 at device 0.0 on pci4 [...] [1] xhci1: 32 bytes context size, 64-bit DMA [...] [1] usbus2 on xhci1 [...] [1] usbus2: 5.0Gbps Super Speed USB v3.0 [...] [1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0 [...] [1] usbus3: EHCI version 1.0 [...] [1] usbus3 on ehci1 [...] [1] usbus3: 480Mbps High Speed USB v2.0 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] acpi_button0: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_tz1: <Thermal Zone> on acpi0 [...] [1] ppc0: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] [1] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] [1] ppbus0: <Parallel port bus> on ppc0 [...] [1] lpt0: <Printer> on ppbus0 [...] [1] lpt0: Interrupt-driven port [...] [1] ppi0: <Parallel I/O> on ppbus0 [...] [1] orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] Timecounter "TSC-low" frequency 1496534269 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] hdacc0: <Realtek ALC887 HDA CODEC> at cad 2 on hdac0 [...] [1] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] [1] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] [1] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] [1] ugen2.1: <(0x1106) XHCI root HUB> at usbus2 [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus2 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] uhub0: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] [1] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] uhub2 on usbus3 [...] [1] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] [1] uhub3 on usbus1 [...] [1] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [1] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD5000AAKX-08U6AA0 19.01H19> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] [1] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [1] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [1] uhub0: 5 ports with 4 removable, self powered [...] [1] ugen2.2: <vendor 0x2109 USB2.0 Hub> at usbus2 [...] [1] uhub4 on uhub0 [...] [1] uhub4: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus2 [...] [1] uhub1: 17 ports with 17 removable, self powered [...] [2] uhub2: 2 ports with 2 removable, self powered [...] [2] uhub3: 2 ports with 2 removable, self powered [...] [2] uhub4: 4 ports with 4 removable, self powered [...] [2] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] [2] uhub5 on uhub3 [...] [2] uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] [2] ugen3.2: <vendor 0x8087 product 0x8000> at usbus3 [...] [2] uhub6 on uhub2 [...] [2] uhub6: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] [2] Root mount waiting for: usbus1 usbus2 usbus3 [...] [2] ugen2.3: <Logitech Gaming Mouse G502> at usbus2 [...] [2] ukbd0 on uhub4 [...] [2] ukbd0: <Logitech Gaming Mouse G502, class 0/0, rev 2.00/3.02, addr 2> on usbus2 [...] [2] kbd2 at ukbd0 [...] [3] uhub5: 4 ports with 4 removable, self powered [...] [3] uhub6: 6 ports with 6 removable, self powered [...] [3] ugen2.4: <Dell Dell USB Keyboard> at usbus2 [...] [3] ukbd1 on uhub4 [...] [3] ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.50, addr 3> on usbus2 [...] [3] kbd3 at ukbd1