[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0: Tue May 4 21:43:29 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Celeron(R) CPU 847E @ 1.10GHz (1098.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xdbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4044066816 (3856 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Intel DICP847S> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1098601508 Hz quality 1000 [...] KTLS: Initialized 2 threads [...] random: entropy device external interface [...] 000.000019 [4354] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: No AES or SHA support. [...] acpi0: <Intel> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d29000-0xf7d29fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d28000-0xf7d283ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d20000-0xf7d23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros AR9485> mem 0xf7c00000-0xf7c7ffff irq 18 at device 0.0 on pci2 [...] ath0: Bluetooth Antenna Diversity card detected [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 819.3 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d27000-0xf7d273ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d26000-0xf7d267ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa0: <Intel Panther Point Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ADATA XM13 32GB 5.0.2d> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/label/nomadroot [rw,noatime]... [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <Atheros Communications Bluetooth USB Host Controller> at usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Kingston UHSII uSD Reader> at usbus1 [...] umass0 on uhub2 [...] umass0: <Kingston UHSII uSD Reader, class 0/0, rev 2.10/0.13, addr 4> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston UHSII uSD Reader 0013> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 61072MB (125075456 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] usb_alloc_device: set address 5 failed (USB_ERR_STALLED, ignored) [...] WARNING: /: TRIM flag on fs but disk does not support TRIM [...] random: unblocking device. [...] acpi_video0: <ACPI video extension> on vgapci0 [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7d25000-0xf7d250ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] lo0: link state changed to UP [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdda00000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe030d000 vbase=0xfffff800e030d000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=141414 cmap[1]=ba5451 cmap[2]=8e9b60 cmap[3]=eabf77 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] ugen1.5: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] uhub_explore: illegal enable change, port 1 [...] ugen1.5: <vendor 0x05ac product 0x0256> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x05ac product 0x0256, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] kbd1 at ukbd0 [...] ums0 on uhub2 [...] ums0: <vendor 0x05ac product 0x0256, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] WARNING: /data: TRIM flag on fs but disk does not support TRIM [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0: Tue May 4 21:43:29 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Celeron(R) CPU 847E @ 1.10GHz (1098.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xdbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4044066816 (3856 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Intel DICP847S> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1098602724 Hz quality 1000 [...] KTLS: Initialized 2 threads [...] random: entropy device external interface [...] 000.000019 [4354] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: No AES or SHA support. [...] acpi0: <Intel> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d29000-0xf7d29fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d28000-0xf7d283ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d20000-0xf7d23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros AR9485> mem 0xf7c00000-0xf7c7ffff irq 18 at device 0.0 on pci2 [...] ath0: Bluetooth Antenna Diversity card detected [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 819.3 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d27000-0xf7d273ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d26000-0xf7d267ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa0: <Intel Panther Point Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ADATA XM13 32GB 5.0.2d> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/label/nomadroot [rw,noatime]... [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] Root mount waiting for: usbus1 [...] ugen1.3: <Atheros Communications Bluetooth USB Host Controller> at usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Kingston UHSII uSD Reader> at usbus1 [...] umass0 on uhub3 [...] umass0: <Kingston UHSII uSD Reader, class 0/0, rev 2.10/0.13, addr 4> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Kingston UHSII uSD Reader 0013> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 61072MB (125075456 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] usb_alloc_device: set address 5 failed (USB_ERR_STALLED, ignored) [...] WARNING: /: TRIM flag on fs but disk does not support TRIM [...] WARNING: /data: TRIM flag on fs but disk does not support TRIM [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] acpi_video0: <ACPI video extension> on vgapci0 [...] Cuse v0.1.36 @ /dev/cuse [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7d25000-0xf7d250ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_STALLED, ignored) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdda00000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe030d000 vbase=0xfffff800e030d000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=141414 cmap[1]=ba5451 cmap[2]=8e9b60 cmap[3]=eabf77 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED [...] ugen1.5: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] uhub_explore: illegal enable change, port 1 [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] ugen1.5: <vendor 0x05ac product 0x0256> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <vendor 0x05ac product 0x0256, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] kbd1 at ukbd0 [...] ums0 on uhub3 [...] ums0: <vendor 0x05ac product 0x0256, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] wlan0: link state changed to UP