[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271638-c7adca0552b5 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 640x480 [...] [1] CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.10-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x1<LAHF> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 25769803776 (24576 MB) [...] [1] avail memory = 24966631424 (23810 MB) [...] [1] Event timer "LAPIC" quality 100 [...] [1] ACPI APIC Table: <DELL PE_SC3 > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xbf15a000-0xbf15a01e [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.6, BCD Revision: 2.6 [...] [1] aesni0: No AES or SHA support. [...] [1] acpi0: <DELL PE_SC3> [...] [1] acpi0: Power Button (fixed) [...] [1] unknown: I/O range not supported [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <network> at device 0.0 (no driver attached) [...] [1] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf0fa000-0xdf0fa3ff irq 22 at device 26.0 on pci0 [...] [1] usbus0: EHCI version 1.0 [...] [1] usbus0 on ehci0 [...] [1] usbus0: 480Mbps High Speed USB v2.0 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci2 [...] [1] miibus0: <MII bus> on bce0 [...] [1] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] [1] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] [1] bce0: Using defaults for TSO: 65518/35/2048 [...] [1] bce0: Ethernet address: ... [...] [1] bce0: ASIC (0x57092008); [...] [1] bce0: link state changed to DOWN [...] [1] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) [...] [1] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] [1] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci2 [...] [1] miibus1: <MII bus> on bce1 [...] [1] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] [1] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] [1] bce1: Using defaults for TSO: 65518/35/2048 [...] [1] bce1: Ethernet address: ... [...] [1] bce1: ASIC (0x57092008); [...] [1] bce1: link state changed to DOWN [...] [1] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) [...] [1] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] [1] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf0fc000-0xdf0fc3ff irq 22 at device 29.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci1 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci3 [...] [1] vgapci0: Boot video device [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xfcd0-0xfcd7,0xfcc8-0xfccb,0xfcd8-0xfcdf,0xfccc-0xfccf,0xfce0-0xfcff mem 0xdf0fe000-0xdf0fe7ff irq 20 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] [1] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] est: CPU supports Enhanced Speedstep, but is not recognized. [...] [1] est: cpu_vendor GenuineIntel, msr 13 [...] [1] device_attach: est0 attach returned 6 [...] [1] est: CPU supports Enhanced Speedstep, but is not recognized. [...] [1] est: cpu_vendor GenuineIntel, msr 13 [...] [1] device_attach: est1 attach returned 6 [...] [1] est: CPU supports Enhanced Speedstep, but is not recognized. [...] [1] est: cpu_vendor GenuineIntel, msr 13 [...] [1] device_attach: est2 attach returned 6 [...] [1] est: CPU supports Enhanced Speedstep, but is not recognized. [...] [1] est: cpu_vendor GenuineIntel, msr 13 [...] [1] device_attach: est3 attach returned 6 [...] [1] Timecounter "TSC-low" frequency 1196992537 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT240BX500SSD1 M6CR056> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] ses0: cd0,pass1 in 'Slot 03', SATA Slot: scbus3 target 0 [...] [2] cd0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DS-8A9SH ED11> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] [3] uhub1: 2 ports with 2 removable, self powered [...] [3] uhub0: 2 ports with 2 removable, self powered [...] [3] Root mount waiting for: usbus0 usbus1 [...] [3] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] [3] uhub2 on uhub0 [...] [3] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] [3] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] [3] uhub3 on uhub1 [...] [3] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] [4] Root mount waiting for: usbus0 usbus1 [...] [4] uhub3: 6 ports with 6 removable, self powered [...] [5] uhub2: 8 ports with 8 removable, self powered [...] [5] ugen1.3: <vendor 0x0424 product 0x2514> at usbus1 [...] [5] uhub4 on uhub2 [...] [5] uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus1 [...] [5] uhub4: MTT enabled [...] [5] Root mount waiting for: usbus1 [...] [6] uhub4: 4 ports with 4 removable, self powered [...] [6] ugen1.4: <Chicony Saitek Eclipse Keyboard> at usbus1 [...] [6] ukbd0 on uhub4 [...] [6] ukbd0: <Chicony Saitek Eclipse Keyboard, class 0/0, rev 2.00/1.30, addr 4> on usbus1 [...] [6] kbd1 at ukbd0