[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE hyperv-n248055-e91d90c0ac0 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU 3215U @ 1.70GHz (1696.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4dfaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2042603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG,RDSEED,PROCTRACE> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8191991808 (7812 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf7514000-0xf7517fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7500000-0xf750ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7510000-0xf7513fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xf7300000-0xf731ffff,0xf7320000-0xf7323fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros AR946x/AR948x> mem 0xf7100000-0xf717ffff irq 19 at device 0.0 on pci4 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9460 mac 640.2 RF5110 phy 819.3 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xf7000000-0xf701ffff,0xf7020000-0xf7023fff irq 16 at device 0.0 on pci5 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf751a000-0xf751a3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7519000-0xf75197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1696074822 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: No presence detection support at nid 27 [...] pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDMCEAW240A4 DC33> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <ROCLA KVM PORT SWITCH> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <ROCLA KVM PORT SWITCH, class 9/0, rev 1.10/1.00, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <TESTQUEST USB Multimedia Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <USB Multimedia Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x0cf3 product 0x311e> at usbus0 [...] Dual Console: Video Primary, Serial Secondary [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff8000380b800), ignoring. [...] igb1: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb1 (ifp 0xfffff8000380d800), ignoring. [...] igb2: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb2 (ifp 0xfffff800035b0800), ignoring. [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 1m51s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE hyperv-n248055-e91d90c0ac0 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU 3215U @ 1.70GHz (1696.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4dfaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2042603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG,RDSEED,PROCTRACE> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8191991808 (7812 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf7514000-0xf7517fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7500000-0xf750ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7510000-0xf7513fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xf7300000-0xf731ffff,0xf7320000-0xf7323fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros AR946x/AR948x> mem 0xf7100000-0xf717ffff irq 19 at device 0.0 on pci4 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9460 mac 640.2 RF5110 phy 819.3 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xf7000000-0xf701ffff,0xf7020000-0xf7023fff irq 16 at device 0.0 on pci5 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf751a000-0xf751a3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7519000-0xf75197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1696074855 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] hdaa1: No presence detection support at nid 27 [...] pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDMCEAW240A4 DC33> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <ROCLA KVM PORT SWITCH> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <ROCLA KVM PORT SWITCH, class 9/0, rev 1.10/1.00, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <TESTQUEST USB Multimedia Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <USB Multimedia Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x0cf3 product 0x311e> at usbus0 [...] Dual Console: Video Primary, Serial Secondary [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80003788800), ignoring. [...] igb1: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb1 (ifp 0xfffff80003b29000), ignoring. [...] igb2: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb2 (ifp 0xfffff800035b2800), ignoring. [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7518000-0xf75180ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ubt0 on uhub1 [...] ubt0: <vendor 0x0cf3 product 0x311e, class 224/1, rev 1.10/0.01, addr 3> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'ath0_wlan1' [...] [ar5210] loaded [...] [ar5211] loaded [...] [ar5212] loaded [...] [ar5416] loaded [...] [ar9300] loaded [...] [ath_rate] loaded [...] [ath_dfs] loaded [...] [ath] loaded [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80003788800), ignoring. [...] igb0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] debugnet_any_ifnet_update: Bad dn_init result from igb2 (ifp 0xfffff800035b2800), ignoring. [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan10' [...] vlan1: changing name to 'lagg0_vlan5' [...] vlan2: changing name to 'lagg0_vlan6' [...] vlan3: changing name to 'lagg0_vlan15' [...] vlan4: changing name to 'lagg0_vlan14' [...] tun1: changing name to 'ovpns1' [...] igb1: link state changed to DOWN [...] igb0: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] carp: demoted by 240 to 240 (interface down) [...] carp: demoted by 240 to 480 (pfsync bulk start) [...] lagg0_vlan5: promiscuous mode enabled [...] carp: demoted by 240 to 720 (interface down) [...] lagg0_vlan6: promiscuous mode enabled [...] carp: demoted by 240 to 960 (interface down) [...] lagg0_vlan10: promiscuous mode enabled [...] carp: demoted by 240 to 1200 (interface down) [...] lagg0_vlan14: promiscuous mode enabled [...] carp: demoted by 240 to 1440 (interface down) [...] lagg0_vlan15: promiscuous mode enabled [...] carp: demoted by 240 to 1680 (interface down) [...] ath0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ovpns1: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 1440 (interface up) [...] lagg0: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 1200 (interface up) [...] lagg0_vlan5: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 960 (interface up) [...] lagg0_vlan6: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 720 (interface up) [...] lagg0_vlan10: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 480 (interface up) [...] lagg0_vlan14: link state changed to UP [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 240 (interface up) [...] lagg0_vlan15: link state changed to UP [...] carp: XXX@XXX: BACKUP -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: demoted by -240 to 0 (pfsync bulk done) [...] carp: XXX@XXX: MASTER -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: BACKUP -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by -240 to 0 (pfsync bulk done) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: MASTER -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: demoted by -240 to 0 (pfsync bulk done) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: MASTER -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: demoted by -240 to 0 (pfsync bulk done) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> INIT (hardware interface up) [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: demoted by -240 to 0 (pfsync bulk done) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan15 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan10