[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3989020672 (3804 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0560-0xf057e [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10c15fff vs 10c16000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0c15000-0xd0c157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0c00000-0xd0c0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0c10000-0xd0c13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0afffff,0xd0b00000-0xd0b03fff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V3.12-0 eTrack 0x800004fa [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xd0700000-0xd07fffff,0xd0800000-0xd0803fff irq 19 at device 0.0 on pci4 [...] igb1: EEPROM V3.12-0 eTrack 0x800004fa [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart2: <16950 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart3: <16950 or compatible> port 0x2e8-0x2ef irq 5 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1999999360 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC888 (Rear Analog Mic)> at nid 24 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <16GB SATA Flash Drive SFPS925A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 15272MB (31277232 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xe000-0xe01f mem 0xd0c14000-0xd0c1401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 18 18 1 0 0 done [...] All buffers synced. [...] Uptime: 21m35s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3989020672 (3804 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0560-0xf057e [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10c15fff vs 10c16000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0c15000-0xd0c157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0c00000-0xd0c0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0c10000-0xd0c13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0afffff,0xd0b00000-0xd0b03fff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V3.12-0 eTrack 0x800004fa [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xd0700000-0xd07fffff,0xd0800000-0xd0803fff irq 19 at device 0.0 on pci4 [...] igb1: EEPROM V3.12-0 eTrack 0x800004fa [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart2: <16950 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart3: <16950 or compatible> port 0x2e8-0x2ef irq 5 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1999999330 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC888 (Rear Analog Mic)> at nid 24 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <16GB SATA Flash Drive SFPS925A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 15272MB (31277232 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xe000-0xe01f mem 0xd0c14000-0xd0c1401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 131 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb0, outif igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb0, outif igb1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb0, outif igb1 [...] fsync: giving up on dirty (error = 35) 0xfffff80002e19a80: type VCHR state VSTATE_CONSTRUCTED op 0xffffffff818b2c28 [...] usecount 1, writecount 0, refcount 338 seqc users 0 rdev 0xfffff80002c79c00 [...] hold count flags () [...] flags () [...] v_object 0xfffff80002b37d68 ref 0 pages 11994 cleanbuf 335 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffff80002dc9000 (pid 20, syncer, tid 100090) [...] 34 34 1 0 0 done [...] All buffers synced. [...] Uptime: 59m35s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3989020672 (3804 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0560-0xf057e [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 10c15fff vs 10c16000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0c15000-0xd0c157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0c00000-0xd0c0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0c10000-0xd0c13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0afffff,0xd0b00000-0xd0b03fff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V3.12-0 eTrack 0x800004fa [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xd0700000-0xd07fffff,0xd0800000-0xd0803fff irq 19 at device 0.0 on pci4 [...] igb1: EEPROM V3.12-0 eTrack 0x800004fa [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart2: <16950 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart3: <16950 or compatible> port 0x2e8-0x2ef irq 5 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1999999423 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC888 (Rear Analog Mic)> at nid 24 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <16GB SATA Flash Drive SFPS925A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 15272MB (31277232 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered