[...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290324480 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC-low" frequency 1600030934 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7e60000-0xf7e7ffff,0xf7e40000-0xf7e5ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7e20000-0xf7e3ffff,0xf7e00000-0xf7e1ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff irq 20 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xf7c00000-0xf7c07fff irq 16 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub3: 17 ports with 17 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8000> at usbus3 [...] uhub5 on uhub0 [...] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: IPv6 addresses on em1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan30' [...] vlan1: changing name to 'lagg0_vlan20' [...] vlan2: changing name to 'lagg0_vlan1' [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] 057.403126 [1130] generic_netmap_attach Emulated adapter for lagg0_vlan1 created (prev was NULL) [...] 057.403142 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0_vlan1 destroyed [...] 057.404544 [1130] generic_netmap_attach Emulated adapter for lagg0_vlan1 created (prev was NULL) [...] 057.464883 [ 320] generic_netmap_register Emulated adapter for lagg0_vlan1 activated [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] vlan3: changing name to 'lagg0_vlan33' [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] ng0: changing name to 'pppoe0' [...] ng0: changing name to 'pppoe0' [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0_vlan1! [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0_vlan1! [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan30' [...] vlan1: changing name to 'lagg0_vlan20' [...] vlan2: changing name to 'lagg0_vlan1' [...] vlan3: changing name to 'lagg0_vlan33' [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] 873.485336 [ 295] generic_netmap_unregister Emulated adapter for lagg0_vlan1 deactivated [...] 873.485747 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0_vlan1 destroyed [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] 995.521546 [1130] generic_netmap_attach Emulated adapter for lagg0_vlan1 created (prev was NULL) [...] 995.521562 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0_vlan1 destroyed [...] 995.522951 [1130] generic_netmap_attach Emulated adapter for lagg0_vlan1 created (prev was NULL) [...] 995.523018 [ 320] generic_netmap_register Emulated adapter for lagg0_vlan1 activated [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0_vlan1! [...] wg0: link state changed to DOWN [...] ng0: changing name to 'pppoe0' [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on lagg0_vlan1 [...] 811.587279 [ 295] generic_netmap_unregister Emulated adapter for lagg0_vlan1 deactivated [...] 811.587689 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0_vlan1 destroyed [...] 916.735740 [1130] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 916.735755 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 916.737158 [1130] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 916.737223 [ 320] generic_netmap_register Emulated adapter for pppoe0 activated [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] 226.671564 [ 295] generic_netmap_unregister Emulated adapter for pppoe0 deactivated [...] 226.671970 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 04bde01a034(stable/21.7)-dirty: Mon Dec 13 09:07:56 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3200.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290324480 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1600035150 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7e60000-0xf7e7ffff,0xf7e40000-0xf7e5ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7e20000-0xf7e3ffff,0xf7e00000-0xf7e1ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff irq 20 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xf7c00000-0xf7c07fff irq 16 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 17 ports with 17 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8000> at usbus3 [...] uhub5 on uhub0 [...] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: IPv6 addresses on em1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan30' [...] vlan1: changing name to 'lagg0_vlan20' [...] vlan2: changing name to 'lagg0_vlan1' [...] vlan3: changing name to 'lagg0_vlan33' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to UP [...] em1: link state changed to UP [...] re0: link state changed to DOWN [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ugen0.2: <vendor 0x1a86 USB2.0-Ser> at usbus0 [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 1> on usbus0 [...] uchcom0: CH340 detected [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] ugen0.2: <vendor 0x1a86 USB2.0-Ser> at usbus0 (disconnected) [...] uchcom0: at uhub3, port 4, addr 1 (disconnected) [...] uchcom0: detached [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] ugen0.2: <vendor 0x1a86 USB2.0-Ser> at usbus0 [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 2> on usbus0 [...] uchcom0: CH340 detected [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] tun1: changing name to 'ovpns1' [...] ovpns1: link state changed to UP [...] tun2: changing name to 'ovpnc2' [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] tun1: changing name to 'ovpns1' [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] tun1: changing name to 'ovpns1' [...] ovpns1: link state changed to UP [...] tun2: changing name to 'ovpnc2' [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0_vlan30 [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] vlan4: changing name to 'lagg0_vlan38' [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan38: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan38: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ovpnc2: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] vlan4: changing name to 'lagg0_vlan38' [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] lagg0_vlan1: link state changed to DOWN [...] lagg0_vlan33: link state changed to DOWN [...] lagg0_vlan38: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan38: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] pid 38898 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 1905 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 49192 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 73677 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 5425 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (5425)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 5425 ppid: 98576 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (98576)] Preventing execution due to repeated segfaults. [...] -> pid: 98576 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p22-HBSD #0 6fd65fcb739(stable/21.7)-dirty: Wed Jan 26 20:48:21 CET 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3200.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290324480 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1600033292 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7e60000-0xf7e7ffff,0xf7e40000-0xf7e5ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7e20000-0xf7e3ffff,0xf7e00000-0xf7e1ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7f14000-0xf7f17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f1c000-0xf7f1c3ff irq 20 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f10000-0xf7f13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7d00000-0xf7d00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xf7c00000-0xf7c07fff irq 16 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f1b000-0xf7f1b3ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f1a000-0xf7f1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub3: 17 ports with 17 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x1a86 USB2.0-Ser> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8000> at usbus3 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 1> on usbus0 [...] uchcom0: CH340 detected [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] em1: link state changed to DOWN [...] lagg0: IPv6 addresses on em1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan30' [...] vlan1: changing name to 'lagg0_vlan20' [...] vlan2: changing name to 'lagg0_vlan1' [...] vlan3: changing name to 'lagg0_vlan33' [...] vlan4: changing name to 'lagg0_vlan38' [...] tun1: changing name to 'ovpns1' [...] tun2: changing name to 'ovpnc2' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to UP [...] em1: link state changed to UP [...] re0: link state changed to DOWN [...] ovpns1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan1: link state changed to UP [...] lagg0_vlan33: link state changed to UP [...] lagg0_vlan38: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] uchcom0: at uhub3, port 10, addr 1 (disconnected) [...] uchcom0: detached [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 1> on usbus0 [...] uchcom0: CH340 detected [...] uchcom0: at uhub3, port 10, addr 1 (disconnected) [...] uchcom0: detached [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 1> on usbus0 [...] uchcom0: CH340 detected [...] uchcom0: at uhub3, port 10, addr 1 (disconnected) [...] uchcom0: detached [...] uchcom0 on uhub3 [...] uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 1> on usbus0 [...] uchcom0: CH340 detected [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP