[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p2 stable/24.7-n267758-4ad7ad40bc77 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-N305 (1804.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33121017856 (31586 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA GOWIN> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 7 3 4 5 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x77c82000-0x77c8201e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA GOWIN> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x60e9000000-0x60e9ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <multimedia> at device 5.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60ea030000-0x60ea03ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60ea020000-0x60ea02ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60ea055000-0x60ea055fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci3 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci4 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <PCI-PCI bridge> at device 6.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> at device 14.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] igb0: <Intel(R) I210 (Copper)> port 0x5000-0x501f mem 0x80a00000-0x80a7ffff,0x80a80000-0x80a83fff at device 0.0 on pci9 [...] igb0: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] igb1: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0x80900000-0x8097ffff,0x80980000-0x80983fff at device 0.0 on pci10 [...] igb1: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <PCI-PCI bridge> at device 6.0 on pci8 [...] pci11: <PCI bus> on pcib11 [...] igb2: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0x80800000-0x8087ffff,0x80880000-0x80883fff at device 0.0 on pci11 [...] igb2: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <PCI-PCI bridge> at device 14.0 on pci8 [...] pci12: <PCI bus> on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] nvme0: <Generic NVMe Device> mem 0x80d00000-0x80d03fff at device 0.0 on pci13 [...] pcib14: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] pci14: <network, ethernet> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1804802660 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] mmcsd0: 125GB <MMCHC SCA128 1.0 SN ... MFG 09/2023 by 223 0x0018> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <GW M2 SSD 512GB SN12221 NLL028R006099> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/93.91, addr 1> on usbus0 [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <GenesysLogic USB2.1 Hub> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/93.91, addr 1> on usbus1 [...] uhub3: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.3: <ASUSTeK ROG AZOTH> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <ASUSTeK ROG AZOTH, class 0/0, rev 2.00/4.08, addr 2> on usbus1 [...] kbd1 at ukbd0 [...] ukbd1 on uhub1 [...] ukbd1: <ASUSTeK ROG AZOTH, class 0/0, rev 2.00/4.08, addr 2> on usbus1 [...] kbd2 at ukbd1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.3: <asmedia ASM1153E> at usbus0 [...] umass0 on uhub2 [...] umass0: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.4: <asmedia ASM1153E> at usbus0 [...] umass1 on uhub2 [...] umass1: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4101 [...] umass1:2:1: Attached to scbus2 [...] da1 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da1: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] Dual Console: Video Primary, Serial Secondary [...] igb0: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] mlx4_core0: <mlx4_core> mem 0x80c00000-0x80cfffff,0x60e0000000-0x60e07fffff at device 0.0 on pci14 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing 0000:14:00.0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60ea054000-0x60ea0540ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub1 [...] uhid0: <ASUSTeK ROG AZOTH, class 0/0, rev 2.00/4.08, addr 2> on usbus1 [...] uhid1 on uhub1 [...] uhid1: <ASUSTeK ROG AZOTH, class 0/0, rev 2.00/4.08, addr 2> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] ugen1.3: <ASUSTeK ROG AZOTH> at usbus1 (disconnected) [...] ukbd0: at uhub1, port 6, addr 2 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub1, port 6, addr 2 (disconnected) [...] uhid0: detached [...] uhid1: at uhub1, port 6, addr 2 (disconnected) [...] uhid1: detached [...] ukbd1: at uhub1, port 6, addr 2 (disconnected) [...] ukbd1: detached [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX:30, nxt 17, rcvif igc0, outif igc1 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 13m34s [...] mlx4_core0: mlx4_shutdown was called [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i3-N305 (1804.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33121030144 (31586 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA GOWIN> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 7 4 6 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x77c82000-0x77c8201e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA GOWIN> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x60e9000000-0x60e9ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <multimedia> at device 5.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60ea030000-0x60ea03ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60ea020000-0x60ea02ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60ea055000-0x60ea055fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci3 [...] igc0: EEPROM V2.17-0 eTrack 0x80000308 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci4 [...] igc1: EEPROM V2.17-0 eTrack 0x80000308 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <PCI-PCI bridge> at device 6.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> at device 14.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] igb0: <Intel(R) I210 (Copper)> port 0x5000-0x501f mem 0x80a00000-0x80a7ffff,0x80a80000-0x80a83fff at device 0.0 on pci9 [...] igb0: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] igb1: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0x80900000-0x8097ffff,0x80980000-0x80983fff at device 0.0 on pci10 [...] igb1: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <PCI-PCI bridge> at device 6.0 on pci8 [...] pci11: <PCI bus> on pcib11 [...] igb2: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0x80800000-0x8087ffff,0x80880000-0x80883fff at device 0.0 on pci11 [...] igb2: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <PCI-PCI bridge> at device 14.0 on pci8 [...] pci12: <PCI bus> on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] nvme0: <Generic NVMe Device> mem 0x80d00000-0x80d03fff at device 0.0 on pci13 [...] pcib14: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] pci14: <network, ethernet> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1804801934 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] mmcsd0: 125GB <MMCHC SCA128 1.0 SN ... MFG 09/2023 by 223 0x0018> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <GW M2 SSD 512GB SN12221 NLL028R006099> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/93.91, addr 1> on usbus0 [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <GenesysLogic USB2.1 Hub> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/93.91, addr 1> on usbus1 [...] uhub3: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.3: <asmedia ASM1153E> at usbus0 [...] umass0 on uhub2 [...] umass0: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:1:0: Attached to scbus1 [...] Root mount waiting for: usbus0 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.4: <asmedia ASM1153E> at usbus0 [...] umass1 on uhub2 [...] umass1: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4101 [...] umass1:2:1: Attached to scbus2 [...] da1 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da1: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] Dual Console: Video Primary, Serial Secondary [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] mlx4_core0: <mlx4_core> mem 0x80c00000-0x80cfffff,0x60e0000000-0x60e07fffff at device 0.0 on pci14 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing 0000:14:00.0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60ea054000-0x60ea0540ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 19m2s [...] mlx4_core0: mlx4_shutdown was called [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0xf to 0x1a [...] CPU: Intel(R) Core(TM) i3-N305 (1804.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33106374656 (31572 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA GOWIN> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 6 1 4 5 7 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x77c82000-0x77c8201e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA GOWIN> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x60e9000000-0x60e9ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <multimedia> at device 5.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60ea030000-0x60ea03ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60ea020000-0x60ea02ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60ea055000-0x60ea055fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci3 [...] igc0: EEPROM V2.17-0 eTrack 0x80000308 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci4 [...] igc1: EEPROM V2.17-0 eTrack 0x80000308 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <PCI-PCI bridge> at device 6.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> at device 14.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] igb0: <Intel(R) I210 (Copper)> port 0x5000-0x501f mem 0x80a00000-0x80a7ffff,0x80a80000-0x80a83fff at device 0.0 on pci9 [...] igb0: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] igb1: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0x80900000-0x8097ffff,0x80980000-0x80983fff at device 0.0 on pci10 [...] igb1: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib11: <PCI-PCI bridge> at device 6.0 on pci8 [...] pci11: <PCI bus> on pcib11 [...] igb2: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0x80800000-0x8087ffff,0x80880000-0x80883fff at device 0.0 on pci11 [...] igb2: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib12: <PCI-PCI bridge> at device 14.0 on pci8 [...] pci12: <PCI bus> on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] nvme0: <Generic NVMe Device> mem 0x80d00000-0x80d03fff at device 0.0 on pci13 [...] pcib14: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] pci14: <network, ethernet> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1804802267 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] mmcsd0: 125GB <MMCHC SCA128 1.0 SN ... MFG 09/2023 by 223 0x0018> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <GW M2 SSD 512GB SN12221 NLL028R006099> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/93.91, addr 1> on usbus0 [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen1.2: <GenesysLogic USB2.1 Hub> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/93.91, addr 1> on usbus1 [...] uhub3: MTT enabled [...] uhub3: 4 ports with 4 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.3: <asmedia ASM1153E> at usbus0 [...] umass0 on uhub2 [...] umass0: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:1:0: Attached to scbus1 [...] Root mount waiting for: usbus0 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device asmedia ASM1153E (0x174c:0x1153) [...] ugen0.4: <asmedia ASM1153E> at usbus0 [...] umass1 on uhub2 [...] umass1: <asmedia ASM1153E, class 0/0, rev 3.00/1.00, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4101 [...] umass1:2:1: Attached to scbus2 [...] da1 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da1: <ASMT 2115 0> Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] Dual Console: Video Primary, Serial Secondary [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore