[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (3992.61-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xa70f41 Family=0x19 Model=0x74 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID> [...] Structured Extended Features3=0x10000010<FSRM,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 64512917504 (61524 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 11 10 2 3 7 6 4 5 12 13 14 15 8 9 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9a970000-0x9a97001e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xdc900000-0xdc903fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci0: <old, non-VGA display device> at device 3.2 (no driver attached) [...] pci0: <old, non-VGA display device> at device 3.3 (no driver attached) [...] pci0: <old, non-VGA display device> at device 3.4 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 4.1 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0x7c00000000-0x7c0fffffff,0xdc000000-0xdc1fffff,0xdc500000-0xdc57ffff at device 0.0 on pci4 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0xdc5c8000-0xdc5cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdc300000-0xdc3fffff at device 0.3 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc200000-0xdc2fffff at device 0.4 on pci4 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0xdc5c0000-0xdc5c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xdc700000-0xdc7fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xdc600000-0xdc6fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1996250568 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus3 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub2 on usbus1 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus0 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] nvme0: Allocated 64MB host memory buffer [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC269 (Analog)> at nid 33 and 18 on hdaa1 [...] pcm5: <Realtek ALC269 (Right Analog Mic)> at nid 24 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <KINGSTON OM8PGP41024Q-A0 ELFK0S.6 50026B7382714E39> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub3: 7 ports with 7 removable, self powered [...] ugen3.2: <VIA Labs, Inc. USB2.0 Hub> at usbus3 [...] uhub4 on uhub1 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.24, addr 1> on usbus3 [...] uhub4: MTT enabled [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub5 on uhub3 [...] uhub5: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.13, addr 1> on usbus0 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus0 usbus3 [...] uhub5: 2 ports with 2 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub5 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/2.01, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] uhub4: 4 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus3 [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub6 on uhub3 [...] uhub6: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.13, addr 3> on usbus0 [...] uhub6: MTT enabled [...] ugen3.3: <VIA Labs, Inc. USB2.0 Hub> at usbus3 [...] uhub7 on uhub4 [...] uhub7: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/0.30, addr 2> on usbus3 [...] uhub7: MTT enabled [...] Root mount waiting for: usbus0 usbus3 [...] uhub6: 2 ports with 2 removable, self powered [...] ugen0.5: <vendor 0x04d9 USB Gaming Mouse> at usbus0 [...] ukbd1 on uhub6 [...] ukbd1: <vendor 0x04d9 USB Gaming Mouse, class 0/0, rev 2.00/1.12, addr 4> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 usbus3 [...] uhub7: 4 ports with 4 removable, self powered [...] ugen0.6: <vendor 0x8087 product 0x0032> at usbus0 [...] ugen0.7: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub8 on uhub3 [...] uhub8: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.20/90.13, addr 6> on usbus0 [...] ugen3.4: <Lenovo USB2.0 Hub> at usbus3 [...] uhub9 on uhub7 [...] uhub9: <Lenovo USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 3> on usbus3 [...] Root mount waiting for: usbus0 usbus3 [...] uhub9: 4 ports with 2 removable, self powered [...] uhub8: 2 ports with 2 removable, self powered [...] ugen3.5: <Cypress Semiconductor 40AS> at usbus3 [...] Root mount waiting for: usbus0 usbus3 [...] ugen0.8: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub10 on uhub3 [...] uhub10: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.20/90.13, addr 7> on usbus0 [...] ugen3.6: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus3 [...] ugen3.7: <VIA Labs, Inc. USB3.1 Hub> at usbus3 [...] uhub11 on uhub1 [...] uhub11: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.24, addr 6> on usbus3 [...] Root mount waiting for: usbus0 usbus3 [...] uhub10: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 [...] uhub11: 4 ports with 2 removable, self powered [...] ugen3.8: <Realtek USB-C Dock Ethernet> at usbus3 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1F4C:0xB002 0xC1). [...] [drm] register mmio base: 0xDC500000 [...] [drm] register mmio size: 524288 [...] [drm] add ip block number 0 <soc21_common> [...] [drm] add ip block number 1 <gmc_v11_0> [...] [drm] add ip block number 2 <ih_v6_0> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <smu> [...] [drm] add ip block number 5 <dm> [...] [drm] add ip block number 6 <gfx_v11_0> [...] [drm] add ip block number 7 <sdma_v6_0> [...] [drm] add ip block number 8 <vcn_v4_0> [...] [drm] add ip block number 9 <jpeg_v4_0> [...] [drm] add ip block number 10 <mes_v11_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-PHXGENERIC-001 [...] [drm] VCN(0) encode/decode are enabled in VM mode [...] drmn0: [drm] jpeg_v4_0_set_dec_ring_funcsdrmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mes1.bin' [...] drmn0: Trusted Memory Zone (TMZ) feature enabled [...] drmn0: PCIE atomic ops is not supported [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 2048M 0x0000008000000000 - 0x000000807FFFFFFF (2048M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] [drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base [...] [drm] Detected VRAM RAM=2048M, BAR=2048M [...] [drm] RAM width 128bits DDR5 [...] [drm] amdgpu: 2048M of VRAM memory ready [...] [drm] amdgpu: 31619M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x000000807FD00000). [...] drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_toc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/psp_13_0_4_ta.bin' [...] drmn0: PSP runtime database doesn't exist [...] drmn0: PSP runtime database doesn't exist [...] drmn0: successfully loaded firmware image 'amdgpu/dcn_3_1_4_dmcub.bin' [...] [drm] Loading DMUB firmware via PSP: version=0x08001B00 [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_imu.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/gc_11_0_1_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/sdma_6_0_1.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vcn_4_0_2.bin' [...] [drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 0 [...] drmn0: Will use PSP to load VCN firmware [...] [drm] max_doorbell_slices=255 [...] [drm] reserve 0x4000000 from 0x8078000000 for PSP TMR [...] drmn0: RAS: optional ras ta ucode is not available [...] drmn0: RAP: optional rap ta ucode is not available [...] drmn0: SECUREDISPLAY: securedisplay ta ucode is not available [...] drmn0: SMU is initialized successfully! [...] [drm] Display Core initialized with v3.2.207! [...] [drm] DMUB hardware initialized: version=0x08001B00 [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drmn0 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drmn0 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drmn0 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] lkpi_iic8: <LinuxKPI I2C> on drmn0 [...] iicbus8: <Philips I2C bus> on lkpi_iic8 [...] iic8: <I2C generic I/O> on iicbus8 [...] [drm] kiq ring mec 3 pipe 1 q 0 [...] [drm] VCN decode and encode initialized successfully(under DPG Mode). [...] drmn0: [drm] jpeg_v4_0_hw_initdrmn0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12 [...] drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 12 on hub 0 [...] drmn0: ring vcn_unified_0 uses VM inv eng 0 on hub 1 [...] drmn0: ring jpeg_dec uses VM inv eng 1 on hub 1 [...] drmn0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0 [...] [drm] ring gfx_32768.1.1 was added [...] [drm] ring compute_32768.2.2 was added [...] [drm] ring sdma_32768.3.3 was added [...] [drm] ring gfx_32768.1.1 test pass [...] [drm] ring gfx_32768.1.1 ib test pass [...] [drm] ring compute_32768.2.2 test pass [...] [drm] ring compute_32768.2.2 ib test pass [...] [drm] ring sdma_32768.3.3 test pass [...] [drm] ring sdma_32768.3.3 ib test pass [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic9: <LinuxKPI I2C> on drm3 [...] iicbus9: <Philips I2C bus> on lkpi_iic9 [...] iic9: <I2C generic I/O> on iicbus9 [...] lkpi_iic10: <LinuxKPI I2C> on drm4 [...] iicbus10: <Philips I2C bus> on lkpi_iic10 [...] iic10: <I2C generic I/O> on iicbus10 [...] lkpi_iic11: <LinuxKPI I2C> on drm5 [...] iicbus11: <Philips I2C bus> on lkpi_iic11 [...] iic11: <I2C generic I/O> on iicbus11 [...] lkpi_iic12: <LinuxKPI I2C> on drm6 [...] iicbus12: <Philips I2C bus> on lkpi_iic12 [...] iic12: <I2C generic I/O> on iicbus12 [...] lkpi_iic13: <LinuxKPI I2C> on drm7 [...] iicbus13: <Philips I2C bus> on lkpi_iic13 [...] iic13: <I2C generic I/O> on iicbus13 [...] lkpi_iic14: <LinuxKPI I2C> on drm8 [...] iicbus14: <Philips I2C bus> on lkpi_iic14 [...] iic14: <I2C generic I/O> on iicbus14 [...] lkpi_iic15: <LinuxKPI I2C> on drm9 [...] iicbus15: <Philips I2C bus> on lkpi_iic15 [...] iic15: <I2C generic I/O> on iicbus15 [...] [drm] Initialized amdgpu 3.49.0 20150101 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "drmfb". [...] [drm] DSC precompute is not needed. [...] [drm] REG_WAIT timeout 1us * 100000 tries - optc314_disable_crtc line:148 [...] start FB_INFO: [...] height=1080 width=1920 depth=32 [...] pbase=0x0 vbase=0xfffffe024ca5a000 [...] name=drmn0 id=amdgpudrmfb flags=0x0 stride=7680 [...] end FB_INFO [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] intsmb0: Could not allocate I/O space [...] device_attach: intsmb0 attach returned 6 [...] iwlwifi0: <iwlwifi> mem 0xdca00000-0xdca03fff at device 0.0 on pci2 [...] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [...] iwlwifi0: PCI dev 2725/1674, rev=0x420, rfid=0x10d000 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-83.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm [...] iwlwifi0: Detected Killer(R) Wi-Fi 6E AX1675x 160MHz Wireless Network Adapter (210NGW), REV=0x420 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm' [...] iwlwifi0: loaded PNVM version 181407b3 [...] iwlwifi0: Detected RF GF, rfid=0x10d000 [...] iwlwifi0: base HW address: XXX [...] intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0 [...] intsmb0: Could not allocate I/O space [...] device_attach: intsmb0 attach returned 6 [...] intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0 [...] intsmb0: Could not allocate I/O space [...] device_attach: intsmb0 attach returned 6 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ums0 on uhub5 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.01, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] uhid1 on uhub9 [...] uhid1: <Cypress Semiconductor 40AS, class 0/0, rev 2.01/0.00, addr 4> on usbus3 [...] uhid0 on uhub5 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.01, addr 2> on usbus0 [...] ums1 on uhub6 [...] ums1: <vendor 0x04d9 USB Gaming Mouse, class 0/0, rev 2.00/1.12, addr 4> on usbus0 [...] ums1: 16 buttons and [XYZT] coordinates ID=0 [...] uhid2 on uhub6 [...] uhid2: <vendor 0x04d9 USB Gaming Mouse, class 0/0, rev 2.00/1.12, addr 4> on usbus0 [...] uhid3 on uhub9 [...] uhid3: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 0/0, rev 2.00/0.14, addr 5> on usbus3 [...] uaudio0 on uhub9 [...] uaudio0: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 0/0, rev 2.00/0.14, addr 5> on usbus3 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6 on uaudio0 [...] uaudio0: HID volume keys found. [...] ure0 on uhub11 [...] ure0: <Realtek USB-C Dock Ethernet, class 0/0, rev 3.00/31.03, addr 7> on usbus3 [...] miibus0: <MII bus> on ure0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ue0: <USB Ethernet> on ure0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] wlan0: link state changed to UP