[...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1418000-0xa1418fff,0xa1417000-0xa1417fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996801085 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 21 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SSD 256GB T0819B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xa1100000-0xa1101fff irq 20 at device 0.0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1416000-0xa14160ff irq 20 at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] vlan0: changing name to 're0_vlan11' [...] vlan1: changing name to 're0_vlan1100' [...] vlan2: changing name to 're0_vlan1200' [...] vlan3: changing name to 're0_vlan1254' [...] vlan4: changing name to 're0_vlan1300' [...] vlan5: changing name to 're0_vlan2000' [...] vlan6: changing name to 'vlan01' [...] re1: link state changed to DOWN [...] re0: link state changed to UP [...] re0_vlan1300: link state changed to UP [...] vlan01: link state changed to UP [...] re0_vlan2000: link state changed to UP [...] re0_vlan11: link state changed to UP [...] re0_vlan1254: link state changed to UP [...] re0_vlan1100: link state changed to UP [...] re0_vlan1200: link state changed to UP [...] re1: link state changed to UP [...] tun1: changing name to 'ovpns1' [...] tun5: changing name to 'ovpns5' [...] ovpns1: link state changed to UP [...] ovpns5: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns5: link state changed to DOWN [...] ovpns5: link state changed to UP [...] re1: link state changed to DOWN [...] re1: promiscuous mode enabled [...] re0: link state changed to DOWN [...] re0_vlan1300: link state changed to DOWN [...] vlan01: link state changed to DOWN [...] re0_vlan2000: link state changed to DOWN [...] re0_vlan11: link state changed to DOWN [...] re0_vlan1254: link state changed to DOWN [...] re0_vlan1100: link state changed to DOWN [...] re0_vlan1200: link state changed to DOWN [...] re0: promiscuous mode enabled [...] re0_vlan11: promiscuous mode enabled [...] re1: promiscuous mode disabled [...] re0: promiscuous mode disabled [...] re0_vlan11: promiscuous mode disabled [...] re1: link state changed to UP [...] re0: link state changed to UP [...] re0_vlan1300: link state changed to UP [...] vlan01: link state changed to UP [...] re0_vlan2000: link state changed to UP [...] re0_vlan11: link state changed to UP [...] re0_vlan1254: link state changed to UP [...] re0_vlan1100: link state changed to UP [...] re0_vlan1200: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns5: link state changed to DOWN [...] ovpns5: link state changed to UP [...] re0: link state changed to DOWN [...] re0_vlan1300: link state changed to DOWN [...] vlan01: link state changed to DOWN [...] re0_vlan2000: link state changed to DOWN [...] re0_vlan11: link state changed to DOWN [...] re0_vlan1254: link state changed to DOWN [...] re0_vlan1100: link state changed to DOWN [...] re0_vlan1200: link state changed to DOWN [...] re0: link state changed to UP [...] re0_vlan1300: link state changed to UP [...] vlan01: link state changed to UP [...] re0_vlan2000: link state changed to UP [...] re0_vlan11: link state changed to UP [...] re0_vlan1254: link state changed to UP [...] re0_vlan1100: link state changed to UP [...] re0_vlan1200: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns5: link state changed to DOWN [...] ovpns5: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns5: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] All buffers synced. [...] Uptime: 5m36s [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0_vlan1300: link state changed to DOWN [...] vlan01: link state changed to DOWN [...] re0_vlan2000: link state changed to DOWN [...] re0_vlan11: link state changed to DOWN [...] re0_vlan1254: link state changed to DOWN [...] re0_vlan1100: link state changed to DOWN [...] re0_vlan1200: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8078823424 (7704 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1414000-0xa1415fff,0xa141a000-0xa141a0ff,0xa1419000-0xa14197ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1300000-0xa1300fff,0x80200000-0x80203fff irq 22 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1200000-0xa1200fff,0x80100000-0x80103fff irq 23 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1418000-0xa1418fff,0xa1417000-0xa1417fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996800942 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 21 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SSD 256GB T0819B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 38 1 0 done [...] All buffers synced. [...] Uptime: 46s [...] uhub0: detached [...] re1: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8078864384 (7704 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1414000-0xa1415fff,0xa141a000-0xa141a0ff,0xa1419000-0xa14197ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1300000-0xa1300fff,0x80200000-0x80203fff irq 22 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1200000-0xa1200fff,0x80100000-0x80103fff irq 23 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1418000-0xa1418fff,0xa1417000-0xa1417fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996801009 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 21 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SSD 256GB T0819B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 28 28 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8078864384 (7704 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1410000-0xa1413fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1414000-0xa1415fff,0xa141a000-0xa141a0ff,0xa1419000-0xa14197ff irq 19 at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1300000-0xa1300fff,0x80200000-0x80203fff irq 22 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1200000-0xa1200fff,0x80100000-0x80103fff irq 23 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1418000-0xa1418fff,0xa1417000-0xa1417fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996801065 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: No presence detection support at nid 21 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <SSD 256GB T0819B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic USB2.0-CRW> at usbus0