[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-STABLE GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i5-8400T CPU @ 1.70GHz (1704.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8037023744 (7664 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 4 5 2 [...] Timecounter "TSC" frequency 1704130786 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14254080 bytes at 0xffffffff831fb448 [...] 000.000125 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff811ae750, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd11a0000-0xd11affff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd11b0000-0xd11b7fff,0xd11bf000-0xd11bf0ff,0xd1100000-0xd117ffff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd11b8000-0xd11bbfff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xd1180000-0xd119ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/md0 []... [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] Root mount waiting for: CAM [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM049-2GH172 SDM2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] random: unblocking device. [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <USB Disk 2.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15100MB (30924800 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/33.08, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/33.08, addr 2> on usbus0 [...] ugen0.4: <PixArt Dell MS116 USB Optical Mouse> at usbus0 [...] Trying to mount root from zfs:livecd []... [...] ums0 on uhub0 [...] ums0: <PixArt Dell MS116 USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xbd800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] failed to retrieve link info, disabling eDP [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-3 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] i915/kbl_dmc_ver1_04.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: i915/kbl_dmc_ver1_04.bin [...] drmn0: successfully loaded firmware image with mapped name: i915_kbl_dmc_ver1_04_bin [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1024 width=1280 depth=32 [...] cmsize=16 size=5242880 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] pid 2245 (xfwm4), jid 0, uid 1001: exited on signal 5 (core dumped) [...] in6_purgeaddr: err=65, destination address delete failed [...] in_scrubprefix: err=65, prefix delete failed [...] lo0: link state changed to DOWN [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP