[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x60f82 Family=0xf Model=0x68 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> [...] SVM: NAsids=64 [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4081000448 (3891 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <102307 APIC1138> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 1 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14385152 bytes at 0xffffffff82882cc0 [...] 000.000075 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <PacBel PBNB0006> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x8800-0x88ff mem 0xd0000000-0xd7ffffff,0xfd8f0000-0xfd8fffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV610 HDA Controller> mem 0xfd8ec000-0xfd8effff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros 5424/2424> mem 0xfe9f0000-0xfe9fffff irq 19 at device 0.0 on pci3 [...] arc4random: no preloaded entropy cache [...] ath0: AR2425 mac 14.2 RF5424 phy 7.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2 [...] ahci0: <AMD SB600 AHCI SATA controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x7000<NOMSI,ATI_PMP_BUG,MAXIO_64K> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 17 at device 19.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ohci2: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq 18 at device 19.2 on pci0 [...] usbus2 on ohci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ohci3: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq 17 at device 19.3 on pci0 [...] usbus3 on ohci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci4: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 18 at device 19.4 on pci0 [...] usbus4 on ohci4 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 19 at device 19.5 on pci0 [...] ehci0: AMD SB600/700 quirk applied [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci0 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfebf4000-0xfebf7fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xfeaff800-0xfeafffff irq 21 at device 1.0 on pci4 [...] fwohci0: OHCI version 1.0 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xfeaff400-0xfeaff4ff irq 22 at device 1.1 on pci4 [...] sdhci_pci0: 1 slot(s) allocated [...] rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeafe800-0xfeafe8ff irq 20 at device 7.0 on pci4 [...] miibus0: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus0 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 3 [...] powernow0: <PowerNow! K8> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC660-VD HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC660-VD Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC660-VD (Analog 2.0+HP/2.0)> at nid 20,27 and 25,24 on hdaa1 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 [...] battery0: critically low charge! [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST9160821AS 3.ALC> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 152627MB (312581808 512 byte sectors) [...] cd0 at ata0 bus 0 scbus4 target 0 lun 0 [...] cd0: <Optiarc DVD RW AD-5540A 2.63> Removable CD-ROM SCSI device [...] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] ugen5.2: <vendor 0x1908 product 0x0226> at usbus5 [...] umass0 on uhub1 [...] umass0: <vendor 0x1908 product 0x0226, class 0/0, rev 2.00/1.11, addr 2> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <Generic Mass-Storage 1.11> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: 14928MB (30572544 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen5.3: <vendor 0x0402 USB2.0 Camera> at usbus5 [...] random: unblocking device. [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> port 0xb00-0xb0f at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] rl0: link state changed to DOWN [...] rl0: link state changed to UP [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (RV610 0x1002:0x94C9 0x1631:0xC109 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: T12Kv [...] drmn0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used) [...] drmn0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF [...] Failed to add WC MTRR for [0xd0000000-0xd7ffffff]: -22; performance may suffer [...] [drm] Detected VRAM RAM=128M, BAR=128M [...] [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 2068552 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 128M of VRAM memory ready [...] [drm] radeon: 512M of GTT memory ready. [...] [drm] Loading RV610 Microcode [...] radeon/RV610_pfp.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/RV610_pfp.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_RV610_pfp_bin [...] radeon/RV610_me.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/RV610_me.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_RV610_me_bin [...] radeon/R600_rlc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/R600_rlc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_R600_rlc_bin [...] [drm] radeon: power management initialized [...] radeon/R600_uvd.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/R600_uvd.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_R600_uvd_bin [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000008000c00 and cpu addr 0x0xfffff80059e6ec00 [...] drmn0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0x0xfffff800d00521d0 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] ath0: ath_legacy_rx_tasklet: sc_inreset_cnt > 0; skipping [...] [drm] ib test on ring 5 succeeded [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] VGA-1 [...] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD2 [...] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [...] [drm] Connector 2: [...] [drm] LVDS-1 [...] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc [...] [drm] Encoders: [...] [drm] LCD1: INTERNAL_LVTM1 [...] [drm] fb mappable at 0xD0243000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 4096000 [...] [drm] fb depth is 24 [...] [drm] pitch is 5120 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=800 width=1280 depth=32 [...] cmsize=16 size=4096000 [...] pbase=0xd0243000 vbase=0xfffff800d0243000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] acpi_asus0: Unsupported Asus laptop: T12KV [...] acpi_video0: <ACPI video extension> on vgapci0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type